mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-24 09:27:36 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/handwired/dygma/raise
History
James Young 924147dfe4
Miscellaneous Data-Driven Keyboard Conversions (#23712) 
Converts `rules.mk` entries to data-driven where applicable.

Affects:

  - `handwired/dygma/raise/ansi`
  - `handwired/dygma/raise/iso`
  - `handwired/symmetric70_proto/promicro`
  - `handwired/symmetric70_proto/proton_c`
  - `lazydesigners/dimple/ortho`
  - `lazydesigners/dimple/staggered/rev2`
  - `lazydesigners/dimple/staggered/rev3`
  - `sirius/uni660/rev2/ansi`
  - `sirius/uni660/rev2/iso`
2024-05-17 23:54:21 +01:00
..
ansi Miscellaneous Data-Driven Keyboard Conversions (#23712) 2024-05-17 23:54:21 +01:00
iso Miscellaneous Data-Driven Keyboard Conversions (#23712) 2024-05-17 23:54:21 +01:00
keymaps Delete trivial keymap readmes (#23714) 2024-05-17 23:49:29 +01:00
config.h
halconf.h
info.json Miscellaneous Data-Driven Keyboard Conversions (#23712) 2024-05-17 23:54:21 +01:00
leds.c Remove quantum.h includes from keyboard code (#23394) 2024-04-03 10:44:25 +11:00
leds.h Remove quantum.h includes from keyboard code (#23394) 2024-04-03 10:44:25 +11:00
matrix.c Remove quantum.h includes from keyboard custom matrix.cs (#23371) 2024-03-30 14:07:19 +00:00
mcuconf.h
post_rules.mk
raise.c
raise.h
readme.md
rules.mk Miscellaneous Data-Driven Keyboard Conversions (#23712) 2024-05-17 23:54:21 +01:00
wire-protocol-constants.h

readme.md

Raise

Make example for this keyboard (after setting up your build environment):

make handwired/dygma/raise/ansi:default

Flashing example for this keyboard:

make handwired/dygma/raise/ansi:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Hardware

QMK does not currently support the Dygma Neuron because QMK does not support SAMD21 which the Neuron has. Instead this code uses a STM32 Blackpill to create a Neuron replacement.

Required Hardware

  1. STM32 Blackpill from WeAct Studio (via aliexpress or adafruit).

  2. 2x USB-C breakouts (via keeb or adafruit).

  3. 2x 2.7KΩ resistors (via digikey).

  4. Breadboard or PCB proto board, wires, solder, etc.

Wiring

Briefly each raise hand uses I2C to communicate with the Neuron:

  1. USB D+ is the I2C clock line.
  2. USB D- is the I2C data line.
  3. The resistors are pullup resistors for the I2C lines.
  4. Each hand draws power from the USB port.

We are also prototyping a custom pcb.