mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
| .. | ||
| keymaps/default | ||
| halconf.h | ||
| keyboard.json | ||
| matrix_diagram.md | ||
| mcuconf.h | ||
| readme.md | ||
| rules.mk | ||
waffling60
A 60% PCB for MX switches, one hot swap and one solder-pcb version with decent layout support.
More info: https://geekhack.org/index.php?topic=103531.0
- Keyboard Maintainer: 4pplet
- Hardware Supported: waffling60
Make example for this keyboard (after setting up your build environment):
make 4pplet/waffling60/rev_d_iso:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
How to enter bootloader (DFU):
- Press and hold the button on the keyboard (the small one on the same side as the MCU) for more than 1 second. The keyboard will then enter bootloader (DFU) mode and it's ready to flash the firmware.
- Note: If holding the button a shorter time, the keyboard will just reset. If you want to exit bootloader mode without flashing a firmware, dissconnect the keyboard from your PC and reconnect it or tap the reset button.
Alternative option if the firmware is already pre-flashed:
- Unplug your keyboard, hold down the Esc key, plug in your keyboard and wait a second before releasing the keys. Bootmagic lite is enabled by default.