mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-22 00:16:41 +06:00
Code Issues Packages Projects Releases Wiki Activity
master
keychron_qmk_firmware/keyboards/1upkeyboards/super16v2
History
Nick Brassel 45dc2499dc
Remove all via-enabled keymaps, including via. (#24322)
2024-08-26 07:51:22 +10:00
..
keymaps/default Remove all via-enabled keymaps, including via. (#24322) 2024-08-26 07:51:22 +10:00
config.h Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00
keyboard.json Data-Driven Keyboard Conversions: 0-9 (#23357) 2024-03-30 13:51:57 +00:00
readme.md
super16v2.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00

readme.md

Super 16 V2

A 4x4 macropad with RGB inswitch lighting and underglow.

  • Keyboard Maintainer: MechMerlin
  • Hardware Supported: 1upkeyboards Super 16 V2
  • Hardware Availability: 1upkeyboards

Make example for this keyboard (after setting up your build environment):

make 1upkeyboards/super16v2:default

Flashing example for this keyboard:

make 1upkeyboards/super16v2:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available