mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 17:37:40 +06:00
6209122213
* [Keymap] Add vitoni layout for GMMK Pro (ISO) Keymap has layered cursor keys similar to laptop keyboards. * Configure RGB defaults for startup * Configure encoder to change value/brightness on FN layer * Remove FN layer and add dedicated RGB layer * Make RGB layer sticky (using TG) to avoid holding FN while configuring RGB * Add RGB indicators for active layers * Add RGB indicator for active RESET mode Signed-off-by: Victor Toni <victor.toni@gmail.com> * Configure idle / USB suspend settings * Add RGB fade in when resuming after suspend * Add RGB fade out before suspend * Add fade out before idle * Add breathe effect when idle
237 lines
8.6 KiB
C
237 lines
8.6 KiB
C
// Copyright 2021 Victor Toni (@vitoni)
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "rgb_matrix_effects.h"
|
|
|
|
#include <rgb_matrix.h>
|
|
#include <lib/lib8tion/lib8tion.h>
|
|
|
|
#include "utils.h"
|
|
|
|
/*
|
|
Offset used to start at the right point in th curve to avoid big jumps in brightness
|
|
0 => 0% (signed) => 50% (unsigned)
|
|
64 => 100% (signed) => 100% (unsigned)
|
|
128 => 0% (signed) => 50% (unsigned)
|
|
192 => -100% (signed) => 0% (unsigned)
|
|
*/
|
|
enum PHASE {
|
|
PHASE_ZERO_RAISING
|
|
,PHASE_HIGH
|
|
,PHASE_ZERO_FALLING
|
|
,PHASE_LOW
|
|
};
|
|
|
|
/**
|
|
* @brief Calculates the offset so that a specific time is aligned to a specific point in the sine curve.
|
|
* @param[in] time The time for which the offset shopuld be calculated.
|
|
* @param[in] phase Phase which should be reached with the offset
|
|
* @see PHASE
|
|
*/
|
|
uint8_t offset_for_time(const uint8_t time, const uint8_t phase) {
|
|
switch (phase) {
|
|
case PHASE_ZERO_RAISING:
|
|
return 0 - time;
|
|
case PHASE_HIGH:
|
|
return 64 - time;
|
|
case PHASE_ZERO_FALLING:
|
|
return 128 - time;
|
|
case PHASE_LOW:
|
|
return 192 - time;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
|
|
* @return scaled down timer
|
|
* @see rgb_time_2_scale_w_factor()
|
|
*/
|
|
uint8_t rgb_time_2_scale(void) {
|
|
static const uint8_t factor = 1;
|
|
return rgb_time_2_scale_w_factor(factor);
|
|
}
|
|
|
|
/*
|
|
* Used to slow down RGB speed.
|
|
*/
|
|
static const uint8_t rgb_speed_divisor = 8;
|
|
|
|
/**
|
|
* @brief Scales down `g_rgb_timer` so that it can be used for RGB effects.
|
|
* @details Usually these calculations aredone internally by some RGB effects.
|
|
This method exposed to scaling so that all effects to have same timebase. If `rgb_matrix_config.speed` all effects are affected the same.
|
|
* @param[in] factor The factor can be used to speed up some operations in relation to others.
|
|
* @return scaled down timer taking into account the given factor
|
|
* @see g_rgb_timer
|
|
* @see rgb_matrix_config.speed
|
|
*/
|
|
uint8_t rgb_time_2_scale_w_factor(const uint8_t rgb_speed_factor) {
|
|
const uint8_t scaled_time = scale16by8(g_rgb_timer, rgb_matrix_config.speed * rgb_speed_factor / rgb_speed_divisor);
|
|
|
|
return scaled_time;
|
|
}
|
|
|
|
/**
|
|
* @brief Inverse function to calculate time required to execute `timer` steps.
|
|
* @details This method allows calculation of the time needed to execute N `timer`steps.
|
|
Usefull when using a scaled down time but requiring the time needed to perform these steps.
|
|
* @param[in] scaled_time scaled down timer to inverse to time
|
|
* @return time corresponding to scaled down time
|
|
* @see rgb_time_2_scale()
|
|
*/
|
|
uint16_t scale_2_rgb_time(const uint8_t scaled_time) {
|
|
const uint16_t time = scaled_time * rgb_speed_divisor * UINT8_MAX / rgb_matrix_config.speed;
|
|
|
|
return time;
|
|
}
|
|
|
|
bool fade_in_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) {
|
|
static const uint8_t max_delta = 1;
|
|
return scaled_sin_up(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v));
|
|
}
|
|
|
|
bool fade_out_ranged(const uint8_t time, const uint8_t range_min, const uint8_t range_max) {
|
|
static const uint8_t max_delta = 1;
|
|
return scaled_sin_down(time, range_min, range_max, max_delta, &(rgb_matrix_config.hsv.v));
|
|
}
|
|
|
|
/**
|
|
* @brief Convenience method to eventually skip the value part when setting HSV.
|
|
* @details When setting HSV this includes the value/brightness.
|
|
As changing brightness might interfer with fading or breathing effects,
|
|
this method can skip the value part of HSV (depending on the preprocessor flag: RGB_FADE_IN).
|
|
* @param[in] hue Hue
|
|
* @param[in] sat Saturation
|
|
* @param[in] hue Value (brightness)
|
|
* @see rgb_matrix_sethsv_noeeprom()
|
|
*/
|
|
void rgb_matrix_sethsv_noeeprom_user(const uint16_t hue, const uint8_t sat, const uint8_t val) {
|
|
#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
|
|
rgb_matrix_config.hsv.h = hue;
|
|
rgb_matrix_config.hsv.s = sat;
|
|
// omitting setting the value to avoid interfering with effects
|
|
// rgb_matrix_config.hsv.v = val;
|
|
#else
|
|
rgb_matrix_sethsv_noeeprom(hue, sat, val);
|
|
#endif
|
|
}
|
|
|
|
#if defined(RGB_FADE_IN) || defined(RGB_IDLE_TIMEOUT)
|
|
/**
|
|
* @brief Calculates the time offset required by fade in.
|
|
* @details Using an arbitrary timer any point on the sine curve might be pointed to.
|
|
* The offest is calculated so that
|
|
* a) the point is at the lowest point in the curve and the curve is raising
|
|
* b) the point is near the current brightness (eg. fade in might be called while fading out and the lowest value has not yet been reached).
|
|
* @param[in] time Current time usually represented by (usually scaled) timer
|
|
* @return Offset required so that time matches the current brightness
|
|
*/
|
|
uint8_t calc_fade_in_offset(const uint8_t time) {
|
|
static const uint8_t max_steps = UINT8_MAX/2;
|
|
static const uint8_t range_min = 0;
|
|
static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
|
|
|
|
// start at the right point in the sine curve
|
|
uint8_t time_offset = offset_for_time(time, PHASE_LOW);
|
|
|
|
// find the right offset to match the current brightness
|
|
for (int i = 1; i < max_steps; i++) {
|
|
const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max);
|
|
if (in_range(value, range_min, range_max) && value < rgb_matrix_config.hsv.v) {
|
|
time_offset++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return time_offset;
|
|
}
|
|
|
|
/**
|
|
* @brief Increases value/brightness until reaching RGB_MATRIX_MAXIMUM_BRIGHTNESS based on given timer.
|
|
* @param[in] time A (usually scaled) timer
|
|
* @return Returns `true` if RGB_MATRIX_MAXIMUM_BRIGHTNESS has been reached, `false` otherwise.
|
|
*/
|
|
bool fade_in(const uint8_t time) {
|
|
static const uint8_t range_min = 0;
|
|
static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
|
|
|
|
return fade_in_ranged(time, range_min, range_max);
|
|
}
|
|
#endif
|
|
|
|
#if defined(RGB_DISABLE_WITH_FADE_OUT) || defined(RGB_IDLE_TIMEOUT)
|
|
/**
|
|
* @brief Calculates the time offset required by fade out.
|
|
* @details Using an arbitrary timer any point on the Sinus curve might be pointed to.
|
|
* The offest is calculated so that
|
|
* a) the point is at the highest point in the curve and the curve is failing
|
|
* b) the point is near the current brightness (eg. fade out might be called while on breath effect).
|
|
* @param[in] time Current time usually represented by a(usually scaled) timer
|
|
* @return Offset required so that time matches the current brightness
|
|
*/
|
|
uint8_t calc_fade_out_offset(const uint8_t time) {
|
|
static const uint8_t range_min = 0;
|
|
static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
|
|
|
|
// start at the right point in the sin() curve
|
|
uint8_t time_offset = offset_for_time(time, PHASE_HIGH);
|
|
|
|
// find the right offset to match the current brightness
|
|
for (int i = 1; i < 127; i++) {
|
|
const uint8_t value = scaled_sin(time + time_offset + 1, range_min, range_max);
|
|
if (in_range(value, range_min, range_max) && rgb_matrix_config.hsv.v < value) {
|
|
time_offset++;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return time_offset;
|
|
}
|
|
#endif
|
|
|
|
#if defined(RGB_DISABLE_WITH_FADE_OUT)
|
|
/**
|
|
* @brief Decreases value/brightness until reaching 0 based on given timer.
|
|
* @param[in] time A (usually scaled) timer
|
|
* @return Returns `true` if 0 has been reached, `false` otherwise.
|
|
*/
|
|
bool fade_out(const uint8_t time) {
|
|
static const uint8_t range_min = 0;
|
|
static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
|
|
|
|
return fade_out_ranged(time, range_min, range_max);
|
|
}
|
|
#endif
|
|
|
|
#if defined(RGB_IDLE_TIMEOUT)
|
|
/**
|
|
* @brief Decreases value/brightness until reaching `RGB_IDLE_MINIMUM_BRIGHTNESS` based on given timer.
|
|
* @param[in] time A (usually scaled) timer
|
|
* @return Returns `true` if `RGB_IDLE_MINIMUM_BRIGHTNESS` has been reached, `false` otherwise.
|
|
*/
|
|
bool idle_fade_out(const uint8_t time) {
|
|
static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS;
|
|
static const uint8_t range_max = RGB_MATRIX_MAXIMUM_BRIGHTNESS;
|
|
|
|
return fade_out_ranged(time, range_min, range_max);
|
|
}
|
|
|
|
#if defined(RGB_IDLE_BREATHE)
|
|
/**
|
|
* @brief Changes value/brightness to create a breathing effect based on given timer.
|
|
* @details Brightness will breathe in the range starting from `RGB_IDLE_MINIMUM_BRIGHTNESS` to `RGB_IDLE_MAXIMUM_BRIGHTNESS`.
|
|
* @param[in] time A (usually scaled) timer
|
|
*/
|
|
void idle_breathe(const uint8_t time) {
|
|
static const uint8_t range_min = RGB_IDLE_MINIMUM_BRIGHTNESS;
|
|
static const uint8_t range_max = RGB_IDLE_MAXIMUM_BRIGHTNESS;
|
|
|
|
rgb_matrix_config.hsv.v = scaled_sin(time, range_min, range_max);
|
|
}
|
|
#endif // RGB_IDLE_BREATHE
|
|
#endif // RGB_IDLE_TIMEOUT
|