mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 09:56:54 +06:00
HHKB YDKB Yang BT Controller (#15759)
Co-authored-by: Drashna Jaelre <drashna@live.com>
This commit is contained in:
Kan-Ru Chen
GitHub
parent
0eab24be26
commit
f439fe6055
130
keyboards/hhkb/yang/config.h
Normal file
130
keyboards/hhkb/yang/config.h
Normal file
|
|
@ -0,0 +1,130 @@
|
|||
/*
|
||||
Copyright 2020 Kan-Ru Chen <kanru@kanru.info>
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x4848 // HH = happy hacking
|
||||
#define PRODUCT_ID 0x0001 // ANSI HHKB
|
||||
#define DEVICE_VER 0x0104
|
||||
#define MANUFACTURER YANG
|
||||
#define PRODUCT HHKB BLE Keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 8
|
||||
|
||||
/* matrix power saving */
|
||||
#define MATRIX_POWER_SAVE_TIMEOUT_MS 10000
|
||||
#define MATRIX_POWER_SAVE_TIMEOUT_L2_MS 1800000
|
||||
#define MATRIX_POWER_SAVE_TIMEOUT_L3_MS 7200000
|
||||
|
||||
#define LED_CAPS_LOCK_PIN F4
|
||||
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
# define OUTPUT_DEFAULT OUTPUT_AUTO
|
||||
|
||||
# undef SERIAL_UART_BAUD
|
||||
# undef SERIAL_UART_DATA
|
||||
# undef SERIAL_UART_UBRR
|
||||
# undef SERIAL_UART_RXD_VECT
|
||||
# undef SERIAL_UART_TXD_READY
|
||||
# undef SERIAL_UART_INIT
|
||||
|
||||
# define SERIAL_UART_BAUD 76800
|
||||
# define SERIAL_UART_DATA UDR1
|
||||
# define SERIAL_UART_UBRR (F_CPU / (8UL * SERIAL_UART_BAUD) - 1)
|
||||
# define SERIAL_UART_RXD_VECT USART1_RX_vect
|
||||
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
|
||||
# define SERIAL_UART_INIT() \
|
||||
do { \
|
||||
cli(); \
|
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX */ \
|
||||
UCSR1B |= (0 << TXCIE1) | (1 << TXEN1); \
|
||||
/* enable RX */ \
|
||||
UCSR1B |= (1 << RXCIE1) | (1 << RXEN1); \
|
||||
/* parity: none(00), even(01), odd(11) */ \
|
||||
UCSR1C |= (0 << UPM11) | (0 << UPM10); \
|
||||
/* 2x speed (error = 0.2%) */ \
|
||||
UCSR1A |= (1 << U2X1); \
|
||||
sei(); \
|
||||
} while (0)
|
||||
#endif
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
||||
//#define DEBUG_MATRIX_SCAN_RATE
|
||||
|
||||
// Disable debounce
|
||||
#define DEBOUNCE 0
|
||||
71
keyboards/hhkb/yang/info.json
Normal file
71
keyboards/hhkb/yang/info.json
Normal file
|
|
@ -0,0 +1,71 @@
|
|||
{
|
||||
"keyboard_name": "YANG HHKB BLE",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"layouts": {
|
||||
"LAYOUT_60_hhkb": {
|
||||
"layout": [
|
||||
{ "label": "Esc", "x": 0, "y": 0 },
|
||||
{ "label": "!", "x": 1, "y": 0 },
|
||||
{ "label": "@", "x": 2, "y": 0 },
|
||||
{ "label": "#", "x": 3, "y": 0 },
|
||||
{ "label": "$", "x": 4, "y": 0 },
|
||||
{ "label": "%", "x": 5, "y": 0 },
|
||||
{ "label": "^", "x": 6, "y": 0 },
|
||||
{ "label": "&", "x": 7, "y": 0 },
|
||||
{ "label": "*", "x": 8, "y": 0 },
|
||||
{ "label": "(", "x": 9, "y": 0 },
|
||||
{ "label": ")", "x": 10, "y": 0 },
|
||||
{ "label": "_", "x": 11, "y": 0 },
|
||||
{ "label": "+", "x": 12, "y": 0 },
|
||||
{ "label": "|", "x": 13, "y": 0 },
|
||||
{ "label": "~", "x": 14, "y": 0 },
|
||||
{ "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
|
||||
{ "label": "Q", "x": 1.5, "y": 1 },
|
||||
{ "label": "W", "x": 2.5, "y": 1 },
|
||||
{ "label": "E", "x": 3.5, "y": 1 },
|
||||
{ "label": "R", "x": 4.5, "y": 1 },
|
||||
{ "label": "T", "x": 5.5, "y": 1 },
|
||||
{ "label": "Y", "x": 6.5, "y": 1 },
|
||||
{ "label": "U", "x": 7.5, "y": 1 },
|
||||
{ "label": "I", "x": 8.5, "y": 1 },
|
||||
{ "label": "O", "x": 9.5, "y": 1 },
|
||||
{ "label": "P", "x": 10.5, "y": 1 },
|
||||
{ "label": "{", "x": 11.5, "y": 1 },
|
||||
{ "label": "}", "x": 12.5, "y": 1 },
|
||||
{ "label": "Delete", "x": 13.5, "y": 1, "w": 1.5 },
|
||||
{ "label": "Control", "x": 0, "y": 2, "w": 1.75 },
|
||||
{ "label": "A", "x": 1.75, "y": 2 },
|
||||
{ "label": "S", "x": 2.75, "y": 2 },
|
||||
{ "label": "D", "x": 3.75, "y": 2 },
|
||||
{ "label": "F", "x": 4.75, "y": 2 },
|
||||
{ "label": "G", "x": 5.75, "y": 2 },
|
||||
{ "label": "H", "x": 6.75, "y": 2 },
|
||||
{ "label": "J", "x": 7.75, "y": 2 },
|
||||
{ "label": "K", "x": 8.75, "y": 2 },
|
||||
{ "label": "L", "x": 9.75, "y": 2 },
|
||||
{ "label": ":", "x": 10.75, "y": 2 },
|
||||
{ "label": "\"", "x": 11.75, "y": 2 },
|
||||
{ "label": "Return", "x": 12.75, "y": 2, "w": 2.25 },
|
||||
{ "label": "Shift", "x": 0, "y": 3, "w": 2.25 },
|
||||
{ "label": "Z", "x": 2.25, "y": 3 },
|
||||
{ "label": "X", "x": 3.25, "y": 3 },
|
||||
{ "label": "C", "x": 4.25, "y": 3 },
|
||||
{ "label": "V", "x": 5.25, "y": 3 },
|
||||
{ "label": "B", "x": 6.25, "y": 3 },
|
||||
{ "label": "N", "x": 7.25, "y": 3 },
|
||||
{ "label": "M", "x": 8.25, "y": 3 },
|
||||
{ "label": "<", "x": 9.25, "y": 3 },
|
||||
{ "label": ">", "x": 10.25, "y": 3 },
|
||||
{ "label": "?", "x": 11.25, "y": 3 },
|
||||
{ "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
|
||||
{ "label": "Fn", "x": 14, "y": 3 },
|
||||
{ "label": "", "x": 1.5, "y": 4 },
|
||||
{ "label": "", "x": 2.5, "y": 4, "w": 1.5 },
|
||||
{ "x": 4, "y": 4, "w": 6 },
|
||||
{ "label": "", "x": 10, "y": 4, "w": 1.5 },
|
||||
{ "label": "", "x": 11.5, "y": 4 }
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
73
keyboards/hhkb/yang/keymaps/default/keymap.c
Normal file
73
keyboards/hhkb/yang/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,73 @@
|
|||
/* -*- eval: (turn-on-orgtbl); -*-
|
||||
* default HHKB Layout
|
||||
*
|
||||
* Copyright 2021 Kan-Ru Chen <kanru@kanru.info>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum custom_layers {
|
||||
BASE,
|
||||
HHKB,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* BASE Level: Default Layer
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
|
||||
|------+------+-----------------------+------+------|
|
||||
| LAlt | LGUI | ******* Space ******* | RGUI | RAlt |
|
||||
|------+------+-----------------------+------+------|
|
||||
*/
|
||||
|
||||
[BASE] = LAYOUT_60_hhkb( // default layer
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB),
|
||||
KC_LALT, KC_LGUI, /* */ KC_SPC, KC_RGUI, KC_RALT),
|
||||
|
||||
/* Layer HHKB: HHKB mode (HHKB Fn)
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| Caps | | | | | | | | Psc | Slk | Pus | Up | | Backs | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| | | | | | | + | - | End | PgD | Dow | | | | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
|
||||
|------+------+----------------------+------+------+
|
||||
| **** | **** | ******************** | **** | **** |
|
||||
|------+------+----------------------+------+------+
|
||||
|
||||
*/
|
||||
|
||||
[HHKB] = LAYOUT_60_hhkb(
|
||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC,
|
||||
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)};
|
||||
21
keyboards/hhkb/yang/keymaps/kanru/config.h
Normal file
21
keyboards/hhkb/yang/keymaps/kanru/config.h
Normal file
|
|
@ -0,0 +1,21 @@
|
|||
/* Copyright 2021 Kan-Ru Chen <kanru@kanru.info>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#define MOUSEKEY_DELAY 90
|
||||
#define MOUSEKEY_INTERVAL 16
|
||||
#define MOUSEKEY_MAX_SPEED 4
|
||||
#define MOUSEKEY_WHEEL_INTERVAL 50
|
||||
126
keyboards/hhkb/yang/keymaps/kanru/keymap.c
Normal file
126
keyboards/hhkb/yang/keymaps/kanru/keymap.c
Normal file
|
|
@ -0,0 +1,126 @@
|
|||
/* -*- eval: (turn-on-orgtbl); -*-
|
||||
* kanru's HHKB Layout
|
||||
*
|
||||
* Copyright 2021 Kan-Ru Chen <kanru@kanru.info>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
#include <stdio.h>
|
||||
|
||||
enum custom_layers {
|
||||
BASE,
|
||||
HHKB,
|
||||
MOUSE,
|
||||
};
|
||||
|
||||
#define BATTERY_FULL 550
|
||||
#define BATTERY_EMPTY 326
|
||||
|
||||
enum my_keycodes { KC_VBAT = SAFE_RANGE };
|
||||
|
||||
uint32_t adafruit_ble_read_battery_voltage(void);
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
case KC_VBAT:
|
||||
if (record->event.pressed) {
|
||||
char vbat[8];
|
||||
uint8_t level = (adafruit_ble_read_battery_voltage() - BATTERY_EMPTY) / (float)(BATTERY_FULL - BATTERY_EMPTY) * 100;
|
||||
snprintf(vbat, sizeof(vbat), "%d", level);
|
||||
send_string(vbat);
|
||||
}
|
||||
return false;
|
||||
#endif
|
||||
default:
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
// clang-format off
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
/* BASE Level: Default Layer
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Backs | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Cont | A | S | D | F | G | H | J | K | L | ; | ' | Ent | | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
| Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Fn0 | | |
|
||||
|-------+---+---+---+---+---+---+---+---+---+---+-------+-----+-------+---|
|
||||
|
||||
|------+------+-----------------------+------+------|
|
||||
| LAlt | LGUI | ******* Space ******* | RGUI | RAlt |
|
||||
|------+------+-----------------------+------+------|
|
||||
*/
|
||||
|
||||
[BASE] = LAYOUT_60_hhkb( // default layer
|
||||
LT(MOUSE, KC_ESC), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(HHKB),
|
||||
KC_LALT, KC_LGUI, /* */ KC_SPC, KC_RGUI, KC_RALT),
|
||||
|
||||
/* Layer HHKB: HHKB mode (HHKB Fn)
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| Pwr | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| Caps | | | BAT | | | | | Psc | Slk | Pus | Up | | Backs | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| | VoD | VoU | Mut | | | * | / | Hom | PgU | Lef | Rig | Enter | | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
| | | | | | | + | - | End | PgD | Dow | | | | |
|
||||
|------+-----+-----+-----+----+----+----+----+-----+-----+-----+-----+-------+-------+-----|
|
||||
|
||||
|------+------+----------------------+------+------+
|
||||
| **** | **** | ******************** | **** | **** |
|
||||
|------+------+----------------------+------+------+
|
||||
|
||||
*/
|
||||
|
||||
[HHKB] = LAYOUT_60_hhkb(
|
||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL,
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_VBAT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_BSPC,
|
||||
KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
|
||||
/* Layer MOUSE: Mouse Key mode (ESC)
|
||||
|------+------+------+-----+----+----+----+----+----+----+-----+-----+-------+-------+----- |
|
||||
| | | | | | | | | | | | | | | |
|
||||
|------+------+------+-----+----+----+----+----+----+----+-----+-----+-------+-------+-----|
|
||||
| | BTN1 | WH_U | | | | | | | | | | | | |
|
||||
|------+------+------+-----+----+----+----+----+----+----+-----+-----+-------+-------+-----|
|
||||
| | BTN2 | WH_D | | | |MS_L|MS_D|MS_U|MS_R| | | | | |
|
||||
|------+------+------+-----+----+----+----+----+----+----+-----+-----+-------+-------+-----|
|
||||
| | BTN3 | | | | | | | | | | | | | |
|
||||
|------+------+------+-----+----+----+----+----+----+----+-----+-----+-------+-------+-----|
|
||||
|
||||
|------+------+----------------------+------+------+
|
||||
| **** | **** | ******************** | **** | **** |
|
||||
|------+------+----------------------+------+------+
|
||||
|
||||
*/
|
||||
|
||||
[MOUSE] = LAYOUT_60_hhkb(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_BTN1, KC_WH_U, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_BTN2, KC_WH_D, KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_BTN3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
// clang-format on
|
||||
173
keyboards/hhkb/yang/matrix.c
Normal file
173
keyboards/hhkb/yang/matrix.c
Normal file
|
|
@ -0,0 +1,173 @@
|
|||
/*
|
||||
Copyright 2011 Jun Wako <wakojun@gmail.com>
|
||||
Copyright 2020 Kan-Ru Chen <kanru@kanru.info>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
# include "adafruit_ble.h"
|
||||
#endif
|
||||
|
||||
#define RELAX_TIME_US 5
|
||||
#define ADC_READ_TIME_US 5
|
||||
|
||||
uint8_t power_save_level;
|
||||
|
||||
static uint32_t matrix_last_modified = 0;
|
||||
|
||||
static inline void key_strobe_high(void) { writePinLow(B6); }
|
||||
static inline void key_strobe_low(void) { writePinHigh(B6); }
|
||||
static inline bool key_state(void) { return readPin(D7); }
|
||||
static inline void key_prev_on(void) { writePinHigh(B7); }
|
||||
static inline void key_prev_off(void) { writePinLow(B7); }
|
||||
static inline bool key_power_state(void) { return !readPin(D6); }
|
||||
|
||||
static inline void suspend_power_down_longer(void) {
|
||||
uint8_t times = 60;
|
||||
while (--times) suspend_power_down();
|
||||
}
|
||||
|
||||
void matrix_power_up(void) {
|
||||
dprint("[matrix_on]\n");
|
||||
// change pins output
|
||||
DDRB = 0xFF;
|
||||
PORTB = 0x40;
|
||||
// switch MOS FET on
|
||||
setPinOutput(D6);
|
||||
writePinLow(D6);
|
||||
}
|
||||
|
||||
void matrix_power_down(void) {
|
||||
dprint("[matrix_off]\n");
|
||||
// input with pull-up consumes less than without it when pin is open
|
||||
DDRB = 0x00;
|
||||
PORTB = 0xFF;
|
||||
// switch MOS FET off
|
||||
setPinOutput(D6);
|
||||
writePinHigh(D6);
|
||||
}
|
||||
|
||||
static inline void key_select_row(uint8_t row) { PORTB = (PORTB & 0b11111000) | ((row)&0b111); }
|
||||
static inline void key_select_col(uint8_t col) { PORTB = (PORTB & 0b11000111) | (((col)&0b111) << 3); }
|
||||
static inline bool key_prev_was_on(matrix_row_t matrix[], uint8_t row, uint8_t col) { return matrix[row] & (1 << col); }
|
||||
|
||||
void matrix_init_custom(void) { power_save_level = 0; }
|
||||
|
||||
bool matrix_scan_custom(matrix_row_t current_matrix[]) {
|
||||
bool matrix_has_changed = false;
|
||||
|
||||
// power on
|
||||
if (!key_power_state()) {
|
||||
matrix_power_up();
|
||||
}
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix_row_t last_row_value = current_matrix[row];
|
||||
|
||||
key_select_row(row);
|
||||
wait_us(RELAX_TIME_US);
|
||||
|
||||
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
|
||||
// Hysteresis control: assert(1) when previous key state is on
|
||||
if (key_prev_was_on(current_matrix, row, col)) {
|
||||
key_prev_on();
|
||||
} else {
|
||||
key_prev_off();
|
||||
}
|
||||
|
||||
// Disable interrupts to encure the ADC timing is correct
|
||||
cli();
|
||||
|
||||
// strobe
|
||||
key_select_col(col);
|
||||
key_strobe_high();
|
||||
|
||||
// Wait for ADC to outputs its value.
|
||||
// 1us was ok on one HHKB, but not worked on another.
|
||||
// no wait doesn't work on Teensy++ with pro(1us works)
|
||||
// no wait does work on tmk PCB(8MHz) with pro2
|
||||
// 1us wait does work on both of above
|
||||
// 1us wait doesn't work on tmk(16MHz)
|
||||
// 5us wait does work on tmk(16MHz)
|
||||
// 5us wait does work on tmk(16MHz/2)
|
||||
// 5us wait does work on tmk(8MHz)
|
||||
// 10us wait does work on Teensy++ with pro
|
||||
// 10us wait does work on 328p+iwrap with pro
|
||||
// 10us wait doesn't work on tmk PCB(8MHz) with pro2(very lagged scan)
|
||||
wait_us(ADC_READ_TIME_US);
|
||||
|
||||
if (key_state()) {
|
||||
current_matrix[row] &= ~(1 << col);
|
||||
} else {
|
||||
current_matrix[row] |= (1 << col);
|
||||
}
|
||||
|
||||
key_strobe_low();
|
||||
sei();
|
||||
|
||||
// Make sure enough time has elapsed since the last call
|
||||
// This is to ensure the matrix voltages have relaxed
|
||||
wait_us(RELAX_TIME_US);
|
||||
}
|
||||
if (current_matrix[row] ^ last_row_value) {
|
||||
matrix_has_changed = true;
|
||||
matrix_last_modified = timer_read32();
|
||||
}
|
||||
}
|
||||
|
||||
// Power saving
|
||||
uint32_t time_diff = timer_elapsed32(matrix_last_modified);
|
||||
if (time_diff > MATRIX_POWER_SAVE_TIMEOUT_L3_MS) {
|
||||
power_save_level = 3;
|
||||
suspend_power_down_longer();
|
||||
} else if (time_diff > MATRIX_POWER_SAVE_TIMEOUT_L2_MS) {
|
||||
power_save_level = 2;
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
if (!adafruit_ble_is_connected()) {
|
||||
power_save_level = 3;
|
||||
}
|
||||
#endif
|
||||
suspend_power_down_longer();
|
||||
} else if (time_diff > MATRIX_POWER_SAVE_TIMEOUT_MS) {
|
||||
power_save_level = 1;
|
||||
suspend_power_down();
|
||||
} else {
|
||||
if (power_save_level != 0) {
|
||||
power_save_level = 0;
|
||||
suspend_wakeup_init();
|
||||
}
|
||||
}
|
||||
|
||||
return matrix_has_changed;
|
||||
}
|
||||
|
||||
bool adafruit_ble_delbonds(void);
|
||||
bool adafruit_ble_reconnect(void);
|
||||
|
||||
bool command_extra(uint8_t code) {
|
||||
switch (code) {
|
||||
#ifdef BLUETOOTH_ENABLE
|
||||
case KC_R:
|
||||
adafruit_ble_delbonds();
|
||||
return true;
|
||||
case KC_S:
|
||||
adafruit_ble_reconnect();
|
||||
return true;
|
||||
#endif
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
}
|
||||
135
keyboards/hhkb/yang/memo.md
Normal file
135
keyboards/hhkb/yang/memo.md
Normal file
|
|
@ -0,0 +1,135 @@
|
|||
## Hardware Information
|
||||
|
||||
The YANG HHKB BLE controller design is similiar to hasu's
|
||||
controller. Most pins are compatiable.
|
||||
|
||||
**MCU**: ATmega32U4
|
||||
**Bluetooth**: MDBT40 (nRF51822-based), with Adafruit Bluefruit LE UART Friend firmware.
|
||||
**Power**: 3.3V
|
||||
**CPU Frequency**: 8MHz
|
||||
**Bootloader**: Lufa MassStorage
|
||||
|
||||
## Pin usage
|
||||
|
||||
| Description | HASU pin usage | YANG mod changed |
|
||||
|:------------------------------------ | ---------------------- | -------------------------- |
|
||||
| ~KEY: Lo(0) when key is pressed | PD7 input(with pullup) | |
|
||||
| Hysteresis: Hi(1) if key was pressed | PB7 output | |
|
||||
| Row selector bit0 | PB0 output | |
|
||||
| Row selector bit1 | PB1 output | |
|
||||
| Row selector bit2 | PB2 output | |
|
||||
| Col selector bit0 | PB3 output | |
|
||||
| Col selector bit1 | PB4 output | |
|
||||
| Col selector bit2 | PB5 output | |
|
||||
| Key unable | PB6 output | |
|
||||
| Switch power | PD4 output | PD6 output (PMOS FET) |
|
||||
| Bluetooth UART Rx | PC4 input | PD2 |
|
||||
| Bluetooth UART Tx | PC5 output | PD3 |
|
||||
| Bluetooth power | | PD5 output (low: power on) |
|
||||
| LED 0 | | PF4 |
|
||||
| LED 2 | | PF1 |
|
||||
| LED 4 | | PF0 |
|
||||
| Unused for PRO2 | PC6 | |
|
||||
| Unused for PRO2 | PC7 | |
|
||||
| Inner USB power | | PF7 |
|
||||
|
||||
## How to flash LUFA MassStorage bootloader on Linux
|
||||
|
||||
The FAT filesystem on Linux very often cannot flush the write cache,
|
||||
leading to broken firmware in the flash.
|
||||
|
||||
We can use `dd` to write to the virtual block storage directly to
|
||||
bypass the vfs layer.
|
||||
|
||||
```
|
||||
dd if=FLASH.bin of=<path of virtual block device> seek=4
|
||||
```
|
||||
|
||||
Skip 4 sectors because the default sector size of the virtual device
|
||||
and dd is 512 bytes and the emulated flash file starts at 5th sector.
|
||||
|
||||
## How to find the path of the virtual block device
|
||||
|
||||
After the keyboard boots into flash mode, on Linux system you should
|
||||
be able to find the block device in `dmesg` logs.
|
||||
|
||||
For exmaple if you type
|
||||
|
||||
```
|
||||
sudo dmesg
|
||||
```
|
||||
|
||||
You should find something like
|
||||
|
||||
```
|
||||
[357885.143593] usb 1-1.4: USB disconnect, device number 24
|
||||
[357885.627740] usb 1-1.4: new full-speed USB device number 25 using xhci_hcd
|
||||
[357885.729486] usb 1-1.4: New USB device found, idVendor=03eb, idProduct=1962, bcdDevice= 0.01
|
||||
[357885.729492] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
||||
[357885.745620] SCSI subsystem initialized
|
||||
[357885.746712] usb-storage 1-1.4:1.0: USB Mass Storage device detected
|
||||
[357885.746818] scsi host0: usb-storage 1-1.4:1.0
|
||||
[357885.746919] usbcore: registered new interface driver usb-storage
|
||||
[357885.747689] usbcore: registered new interface driver uas
|
||||
[357886.766755] scsi 0:0:0:0: Direct-Access LUFA Bootloader 0.00 PQ: 0 ANSI: 0
|
||||
[357886.773216] scsi 0:0:0:0: Attached scsi generic sg0 type 0
|
||||
[357886.777474] sd 0:0:0:0: [sdx] 134 512-byte logical blocks: (68.6 kB/67.0 KiB)
|
||||
[357886.780300] sd 0:0:0:0: [sdx] Write Protect is off
|
||||
[357886.780302] sd 0:0:0:0: [sdx] Mode Sense: 00 00 00 00
|
||||
[357886.783113] sd 0:0:0:0: [sdx] Asking for cache data failed
|
||||
[357886.783114] sd 0:0:0:0: [sdx] Assuming drive cache: write through
|
||||
[357886.842676] sdx:
|
||||
[357886.859528] sd 0:0:0:0: [sdx] Attached SCSI removable disk
|
||||
```
|
||||
|
||||
The `sdx` is the block device name and the full path is at `/dev/sdx`
|
||||
The above flash command will become
|
||||
|
||||
```
|
||||
dd if=FLASH.bin of=/dev/sdx seek=4
|
||||
```
|
||||
|
||||
## Adafruit Bluefruit LE UART configuraton
|
||||
|
||||
The default baud rate used by the firmware is 76800 although adafruit
|
||||
do not recommend using higher baudrates than 9600 because the nRF51
|
||||
UART can drop characters.
|
||||
|
||||
Double speed mode to get more accurate async reading because the F_CPU
|
||||
speed is 8MHz.
|
||||
|
||||
## Power saving mode design
|
||||
|
||||
Power saving is only enabled when USB is detached and using battery
|
||||
power. Here we define several levels of power saving mode, each saves
|
||||
more power but takes longer to resume operation.
|
||||
|
||||
1. Level 1: idle mode is activated after a short configurable time
|
||||
(MATRIX_POWER_SAVE_TIMEOUT_MS) MCU is put into sleep mode and only
|
||||
scan the matrix per 15ms. PORTB pins are set to input with pull-up
|
||||
to save power. Sensing PCB is powered down between scans.
|
||||
|
||||
2. Level 2: after idling for longer (MATRIX_POWER_SAVE_TIMEOUT_L2_MS)
|
||||
we entry this state. Matrix scan is skipped until the time lapses
|
||||
900ms.
|
||||
|
||||
2. Level 3: sleep mode is activated after a longer timeout
|
||||
(MATRIX_POWER_SAVE_TIMEOUT_L3_MS) Bluetooth module is powered down.
|
||||
|
||||
## Battery reading
|
||||
|
||||
VBAT is connected to AIN6 pin on the MDBT40 module and the AREF pin is
|
||||
the reference voltage. Doing a ADC with AT+HWDAC=6 will return the
|
||||
difference between VBAT and VREF.
|
||||
|
||||
It seems when fully charged the ADC read is 550. Likely VREF is 3311mV
|
||||
and the fully charged VBAT is thus 3861mV.
|
||||
|
||||
Enable battery service with AT+BLEBATTEN=1 first then we can update the
|
||||
battery level by using AT+BLEBATTVAL=%d
|
||||
|
||||
## References
|
||||
|
||||
* https://github.com/joric/qmk/wiki/hhkb_ble
|
||||
* https://github.com/tomsmalley/custom-topre-guide
|
||||
* https://github.com/abcminiuser/lufa/blob/master/Bootloaders/MassStorage/Lib/VirtualFAT.h
|
||||
118
keyboards/hhkb/yang/readme.md
Normal file
118
keyboards/hhkb/yang/readme.md
Normal file
|
|
@ -0,0 +1,118 @@
|
|||
# HHKB Alternate Controller (YANG HHKB BLE Mod)
|
||||
|
||||
|
||||
|
||||
An alternative controler for the HHKB designed by YANG (yangdigi)
|
||||
based on the hasu controller.
|
||||
|
||||
* Keyboard Maintainer: [Kan-Ru Chen](https://github.com/kanru)
|
||||
* Hardware Supported: YANG HHKB BLE Controller
|
||||
* Hardware Availability: https://kbdfans.com/products/hhkb-ble-mod-upgrade-module
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make hhkb/yang:default
|
||||
|
||||
To flash, first boot your keyboard into bootloader (hold ESC and attach usb cable)
|
||||
then a virtual USB storage should appear. You can copy the `hhkb_yang_default.bin`
|
||||
file to the virtual USB storage and override the `HHKB_BLE.BIN` file in there.
|
||||
|
||||
Make sure to unmount and eject the virtual USB storage.
|
||||
|
||||
## Features:
|
||||
|
||||
- [x] QMK (via USB)
|
||||
- [x] Bluetooth (BLE)
|
||||
- [x] Power saving mode
|
||||
- [x] Idle mode
|
||||
- [x] Deep sleep mode
|
||||
- [x] LEDs
|
||||
- [x] Battery service
|
||||
- [x] Special commands
|
||||
- [x] Switch BT peer
|
||||
|
||||
## Entering flash mode
|
||||
|
||||
Different ways to enter flash mode:
|
||||
|
||||
* Press and hold the ESC key. Insert the USB cable to enter the flash
|
||||
mode. When the OS shows the drive disk, you can release the key.
|
||||
|
||||
* Use the magic command LSHIFT+RSHIFT+B to reboot to bootloader then
|
||||
quickly hold the ESC key.
|
||||
|
||||
If you reflash the wrong firmware or did not reflash successfully, you
|
||||
can no longer enter the flash mode, especially the wireless keyboard
|
||||
with battery. You need to turn off the keyboard's power switch, and
|
||||
re-enter the flash mode, reflash the correct firmware.
|
||||
|
||||
After entering the bootloader(flash mode), three indicators on the top
|
||||
right of the HHKB BLE controller will flash. LED3(green) will flash
|
||||
quickly when writing firmware to the controller.
|
||||
|
||||
If these three leds are not soldered or your hhkb case is black, you
|
||||
can't know their status, but you can still see LED3 under the right
|
||||
USB port.
|
||||
|
||||
## How to reliably flash LUFA MassStorage bootloader on Linux
|
||||
|
||||
The FAT filesystem on Linux very often cannot flush the write cache,
|
||||
leading to broken firmware in the flash.
|
||||
|
||||
We can use `dd` to write to the virtual block storage directly to
|
||||
bypass the vfs layer.
|
||||
|
||||
```
|
||||
dd if=FLASH.bin of=<path of virtual block device> seek=4
|
||||
```
|
||||
|
||||
Skip 4 sectors because the default sector size of the virtual device
|
||||
and dd is 512 bytes and the emulated flash file starts at 5th sector.
|
||||
|
||||
## How to find the path of the virtual block device
|
||||
|
||||
After the keyboard boots into flash mode, on Linux system you should
|
||||
be able to find the block device in `dmesg` logs.
|
||||
|
||||
For exmaple if you type
|
||||
|
||||
```
|
||||
sudo dmesg
|
||||
```
|
||||
|
||||
You should find something like
|
||||
|
||||
```
|
||||
[357885.143593] usb 1-1.4: USB disconnect, device number 24
|
||||
[357885.627740] usb 1-1.4: new full-speed USB device number 25 using xhci_hcd
|
||||
[357885.729486] usb 1-1.4: New USB device found, idVendor=03eb, idProduct=1962, bcdDevice= 0.01
|
||||
[357885.729492] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
|
||||
[357885.745620] SCSI subsystem initialized
|
||||
[357885.746712] usb-storage 1-1.4:1.0: USB Mass Storage device detected
|
||||
[357885.746818] scsi host0: usb-storage 1-1.4:1.0
|
||||
[357885.746919] usbcore: registered new interface driver usb-storage
|
||||
[357885.747689] usbcore: registered new interface driver uas
|
||||
[357886.766755] scsi 0:0:0:0: Direct-Access LUFA Bootloader 0.00 PQ: 0 ANSI: 0
|
||||
[357886.773216] scsi 0:0:0:0: Attached scsi generic sg0 type 0
|
||||
[357886.777474] sd 0:0:0:0: [sdx] 134 512-byte logical blocks: (68.6 kB/67.0 KiB)
|
||||
[357886.780300] sd 0:0:0:0: [sdx] Write Protect is off
|
||||
[357886.780302] sd 0:0:0:0: [sdx] Mode Sense: 00 00 00 00
|
||||
[357886.783113] sd 0:0:0:0: [sdx] Asking for cache data failed
|
||||
[357886.783114] sd 0:0:0:0: [sdx] Assuming drive cache: write through
|
||||
[357886.842676] sdx:
|
||||
[357886.859528] sd 0:0:0:0: [sdx] Attached SCSI removable disk
|
||||
```
|
||||
|
||||
The `sdx` is the block device name and the full path is at `/dev/sdx`
|
||||
The above flash command will become
|
||||
|
||||
```
|
||||
dd if=FLASH.bin of=/dev/sdx seek=4
|
||||
```
|
||||
|
||||
**Caution**: if set to incorrect device it may wipe out
|
||||
your actual disk.
|
||||
|
||||
## Help page of original firmware
|
||||
|
||||
http://help.ydkb.io/doku.php?id=en:kb-mods:hhkb-ble
|
||||
27
keyboards/hhkb/yang/rules.mk
Normal file
27
keyboards/hhkb/yang/rules.mk
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# MCU frequency
|
||||
F_CPU = 8000000
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = lufa-ms
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
|
||||
LAYOUTS = 60_hhkb
|
||||
|
||||
# Disable bluetooth until the UART code is merged
|
||||
BLUETOOTH_DRIVER = BluefruitLE
|
||||
|
||||
# Custom matrix file for the HHKB
|
||||
CUSTOM_MATRIX = lite
|
||||
SRC += matrix.c
|
||||
118
keyboards/hhkb/yang/yang.c
Normal file
118
keyboards/hhkb/yang/yang.c
Normal file
|
|
@ -0,0 +1,118 @@
|
|||
/* Copyright 2021 Kan-Ru Chen <kanru@kanru.info>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include "yang.h"
|
||||
|
||||
extern uint8_t power_save_level;
|
||||
|
||||
void hhkb_led_on(uint8_t led) {
|
||||
switch (led) {
|
||||
case 1:
|
||||
writePinHigh(F4);
|
||||
break;
|
||||
case 2:
|
||||
writePinHigh(F2);
|
||||
break;
|
||||
case 3:
|
||||
writePinHigh(F0);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void hhkb_led_off(uint8_t led) {
|
||||
switch (led) {
|
||||
case 1:
|
||||
writePinLow(F4);
|
||||
break;
|
||||
case 2:
|
||||
writePinLow(F2);
|
||||
break;
|
||||
case 3:
|
||||
writePinLow(F0);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void keyboard_pre_init_kb(void) {
|
||||
// BT power up
|
||||
setPinOutput(D5);
|
||||
writePinLow(D5);
|
||||
|
||||
// Row selectors
|
||||
setPinOutput(B0);
|
||||
setPinOutput(B1);
|
||||
setPinOutput(B2);
|
||||
|
||||
// Col selectors
|
||||
setPinOutput(B3);
|
||||
setPinOutput(B4);
|
||||
setPinOutput(B5);
|
||||
|
||||
// Key strobe
|
||||
setPinOutput(B6);
|
||||
writePinHigh(B6);
|
||||
|
||||
// Key: input with pull-up
|
||||
setPinInputHigh(D7);
|
||||
|
||||
// Unused pins on Pro2 ANSI
|
||||
// Input with pull up to save power
|
||||
setPinInputHigh(C6);
|
||||
setPinInputHigh(C7);
|
||||
|
||||
// LED pin configuration
|
||||
setPinOutput(F0);
|
||||
setPinOutput(F1);
|
||||
setPinOutput(F4);
|
||||
writePinLow(F0);
|
||||
writePinLow(F1);
|
||||
writePinLow(F4);
|
||||
|
||||
// Turn on switch PCB
|
||||
setPinOutput(D6);
|
||||
writePinLow(D6);
|
||||
|
||||
keyboard_pre_init_user();
|
||||
}
|
||||
|
||||
void suspend_power_down_kb(void) {
|
||||
if (power_save_level > 2) {
|
||||
// Disable UART TX to avoid current leakage
|
||||
UCSR1B &= ~_BV(TXEN1);
|
||||
// Power down BLE module
|
||||
writePinHigh(D5);
|
||||
}
|
||||
|
||||
suspend_power_down_user();
|
||||
}
|
||||
|
||||
void suspend_wakeup_init_kb(void) {
|
||||
// Power up BLE module
|
||||
writePinLow(D5);
|
||||
// Enable UART TX
|
||||
UCSR1B |= _BV(TXEN1);
|
||||
|
||||
suspend_wakeup_init_user();
|
||||
}
|
||||
|
||||
layer_state_t layer_state_set_kb(layer_state_t state) {
|
||||
state = layer_state_set_user(state);
|
||||
|
||||
writePin(F1, IS_LAYER_ON_STATE(state, 1));
|
||||
writePin(F0, IS_LAYER_ON_STATE(state, 2));
|
||||
|
||||
return state;
|
||||
}
|
||||
36
keyboards/hhkb/yang/yang.h
Normal file
36
keyboards/hhkb/yang/yang.h
Normal file
|
|
@ -0,0 +1,36 @@
|
|||
/* Copyright 2021 Kan-Ru Chen <kanru@kanru.info>
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_60_hhkb( \
|
||||
K31, K30, K00, K10, K11, K20, K21, K40, K41, K60, K61, K70, K71, K50, K51, \
|
||||
K32, K01, K02, K13, K12, K23, K22, K42, K43, K62, K63, K73, K72, K52, \
|
||||
K33, K04, K03, K14, K15, K24, K25, K45, K44, K65, K64, K74, K53, \
|
||||
K34, K05, K06, K07, K16, K17, K26, K46, K66, K76, K75, K55, K54, \
|
||||
K35, K36, K37, K57, K56) \
|
||||
\
|
||||
{ \
|
||||
{ K00, K01, K02, K03, K04, K05, K06, K07 }, \
|
||||
{ K10, K11, K12, K13, K14, K15, K16, K17 }, \
|
||||
{ K20, K21, K22, K23, K24, K25, K26, KC_NO }, \
|
||||
{ K30, K31, K32, K33, K34, K35, K36, K37 }, \
|
||||
{ K40, K41, K42, K43, K44, K45, K46, KC_NO }, \
|
||||
{ K50, K51, K52, K53, K54, K55, K56, K57 }, \
|
||||
{ K60, K61, K62, K63, K64, K65, K66, KC_NO }, \
|
||||
{ K70, K71, K72, K73, K74, K75, K76, KC_NO } \
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user