mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-26 02:17:38 +06:00
Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
QMK Bot
commit
9bbc0cbb3b
159
keyboards/mechwild/puckbuddy/config.h
Normal file
159
keyboards/mechwild/puckbuddy/config.h
Normal file
|
|
@ -0,0 +1,159 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x6D77 // mw = "MechWild"
|
||||
#define PRODUCT_ID 0x170F
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER MechWild
|
||||
#define PRODUCT PuckBuddy
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
#ifdef UF2_BUILD
|
||||
#define EXTERNAL_EEPROM_BYTE_COUNT 2048
|
||||
#define EXTERNAL_EEPROM_PAGE_SIZE 128
|
||||
#define EXTERNAL_EEPROM_ADDRESS_SIZE 1
|
||||
#define EXTERNAL_EEPROM_WRITE_TIME 0
|
||||
#define FEE_PAGE_BASE_ADDRESS 0x08008000
|
||||
#endif
|
||||
|
||||
/* Define custom font */
|
||||
#define OLED_FONT_H "keyboards/mechwild/puckbuddy/glcdfont.c"
|
||||
|
||||
/* allows the "key" button on the blackpill to toggle caps lock for user testing before soldering */
|
||||
#define DIP_SWITCH_PINS { A0 }
|
||||
|
||||
/* status light pins using the on board LED for the blackpill */
|
||||
#define LED_CAPS_LOCK_PIN C13
|
||||
#define LED_PIN_ON_STATE 0
|
||||
|
||||
/* set the tapping term for glidepoint pad to register a tap click */
|
||||
//#define CIRQUE_PINNACLE_TAPPING_TERM 0 // This is set to 0 to disable it
|
||||
|
||||
/* TAPPING_TERM value is used for the CIRQUE_PINNACLE_TAPPING_TERM as well by default
|
||||
* defining it this way allows us to easily modify it with DYNAMIC_TAPPING_TERM_ENABLE
|
||||
*/
|
||||
#define TAPPING_TERM 0
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B12, B13, B14, B15 }
|
||||
#define MATRIX_COL_PINS { B10, A8, B4, B5 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* spi config */
|
||||
#define SPI_DRIVER SPID1
|
||||
#define SPI_SCK_PIN A5
|
||||
#define SPI_SCK_PAL_MODE 5
|
||||
#define SPI_MOSI_PIN A7
|
||||
#define SPI_MOSI_PAL_MODE 5
|
||||
#define SPI_MISO_PIN A6
|
||||
#define SPI_MISO_PAL_MODE 5
|
||||
#define CIRQUE_PINNACLE_SPI_DIVISOR 8
|
||||
#define CIRQUE_PINNACLE_SPI_CS_PIN A4
|
||||
|
||||
/* encoder pins */
|
||||
#define ENCODERS_PAD_A { B1, B3 }
|
||||
#define ENCODERS_PAD_B { B0, A15 }
|
||||
|
||||
/* encoder resolution */
|
||||
#define ENCODER_RESOLUTION 4
|
||||
#define TAP_CODE_DELAY 10
|
||||
|
||||
/* COL2ROW, ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* RGB settings, uncomment this define to enable RGB */
|
||||
#define RGB_DI_PIN A3
|
||||
#ifdef RGB_DI_PIN
|
||||
# define RGBLED_NUM 3
|
||||
# define RGBLIGHT_HUE_STEP 8
|
||||
# define RGBLIGHT_SAT_STEP 8
|
||||
# define RGBLIGHT_VAL_STEP 8
|
||||
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
# define RGBLIGHT_EFFECT_BREATHING
|
||||
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
# define RGBLIGHT_EFFECT_SNAKE
|
||||
# define RGBLIGHT_EFFECT_KNIGHT
|
||||
# define RGBLIGHT_EFFECT_CHRISTMAS
|
||||
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
# define RGBLIGHT_EFFECT_RGB_TEST
|
||||
# define RGBLIGHT_EFFECT_ALTERNATING
|
||||
/*== customize breathing effect ==*/
|
||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
/*==== use exp() and sin() ====*/
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
//#define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
//#define BOOTMAGIC_LITE_ROW 0
|
||||
//#define BOOTMAGIC_LITE_COLUMN 0
|
||||
231
keyboards/mechwild/puckbuddy/glcdfont.c
Normal file
231
keyboards/mechwild/puckbuddy/glcdfont.c
Normal file
|
|
@ -0,0 +1,231 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "progmem.h"
|
||||
|
||||
const unsigned char font[] PROGMEM = {
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00,
|
||||
0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00,
|
||||
0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00,
|
||||
0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00,
|
||||
0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00,
|
||||
0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00,
|
||||
0x00, 0x18, 0x3C, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00,
|
||||
0x00, 0x18, 0x24, 0x18, 0x00, 0x00,
|
||||
0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00,
|
||||
0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00,
|
||||
0x26, 0x29, 0x79, 0x29, 0x26, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x05, 0x07, 0x00,
|
||||
0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00,
|
||||
0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00,
|
||||
0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00,
|
||||
0x14, 0x22, 0x7F, 0x22, 0x14, 0x00,
|
||||
0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00,
|
||||
0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00,
|
||||
0x00, 0x66, 0x89, 0x95, 0x6A, 0x00,
|
||||
0x60, 0x60, 0x60, 0x60, 0x60, 0x00,
|
||||
0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00,
|
||||
0x08, 0x04, 0x7E, 0x04, 0x08, 0x00,
|
||||
0x10, 0x20, 0x7E, 0x20, 0x10, 0x00,
|
||||
0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00,
|
||||
0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00,
|
||||
0x1E, 0x10, 0x10, 0x10, 0x10, 0x00,
|
||||
0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00,
|
||||
0x30, 0x38, 0x3E, 0x38, 0x30, 0x00,
|
||||
0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x5F, 0x00, 0x00, 0x00,
|
||||
0x00, 0x07, 0x00, 0x07, 0x00, 0x00,
|
||||
0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00,
|
||||
0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00,
|
||||
0x23, 0x13, 0x08, 0x64, 0x62, 0x00,
|
||||
0x36, 0x49, 0x56, 0x20, 0x50, 0x00,
|
||||
0x00, 0x08, 0x07, 0x03, 0x00, 0x00,
|
||||
0x00, 0x1C, 0x22, 0x41, 0x00, 0x00,
|
||||
0x00, 0x41, 0x22, 0x1C, 0x00, 0x00,
|
||||
0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00,
|
||||
0x08, 0x08, 0x3E, 0x08, 0x08, 0x00,
|
||||
0x00, 0x80, 0x70, 0x30, 0x00, 0x00,
|
||||
0x08, 0x08, 0x08, 0x08, 0x08, 0x00,
|
||||
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,
|
||||
0x20, 0x10, 0x08, 0x04, 0x02, 0x00,
|
||||
0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00,
|
||||
0x00, 0x42, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x72, 0x49, 0x49, 0x49, 0x46, 0x00,
|
||||
0x21, 0x41, 0x49, 0x4D, 0x33, 0x00,
|
||||
0x18, 0x14, 0x12, 0x7F, 0x10, 0x00,
|
||||
0x27, 0x45, 0x45, 0x45, 0x39, 0x00,
|
||||
0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00,
|
||||
0x41, 0x21, 0x11, 0x09, 0x07, 0x00,
|
||||
0x36, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x46, 0x49, 0x49, 0x29, 0x1E, 0x00,
|
||||
0x00, 0x00, 0x14, 0x00, 0x00, 0x00,
|
||||
0x00, 0x40, 0x34, 0x00, 0x00, 0x00,
|
||||
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x14, 0x14, 0x14, 0x14, 0x14, 0x00,
|
||||
0x00, 0x41, 0x22, 0x14, 0x08, 0x00,
|
||||
0x02, 0x01, 0x59, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00,
|
||||
0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x36, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x22, 0x00,
|
||||
0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x49, 0x49, 0x49, 0x41, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x01, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x51, 0x73, 0x00,
|
||||
0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x41, 0x00, 0x00,
|
||||
0x20, 0x40, 0x41, 0x3F, 0x01, 0x00,
|
||||
0x7F, 0x08, 0x14, 0x22, 0x41, 0x00,
|
||||
0x7F, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00,
|
||||
0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00,
|
||||
0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00,
|
||||
0x7F, 0x09, 0x09, 0x09, 0x06, 0x00,
|
||||
0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00,
|
||||
0x7F, 0x09, 0x19, 0x29, 0x46, 0x00,
|
||||
0x26, 0x49, 0x49, 0x49, 0x32, 0x00,
|
||||
0x03, 0x01, 0x7F, 0x01, 0x03, 0x00,
|
||||
0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00,
|
||||
0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00,
|
||||
0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00,
|
||||
0x63, 0x14, 0x08, 0x14, 0x63, 0x00,
|
||||
0x03, 0x04, 0x78, 0x04, 0x03, 0x00,
|
||||
0x61, 0x59, 0x49, 0x4D, 0x43, 0x00,
|
||||
0x00, 0x7F, 0x41, 0x41, 0x41, 0x00,
|
||||
0x02, 0x04, 0x08, 0x10, 0x20, 0x00,
|
||||
0x00, 0x41, 0x41, 0x41, 0x7F, 0x00,
|
||||
0x04, 0x02, 0x01, 0x02, 0x04, 0x00,
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, 0x00,
|
||||
0x00, 0x03, 0x07, 0x08, 0x00, 0x00,
|
||||
0x20, 0x54, 0x54, 0x78, 0x40, 0x00,
|
||||
0x7F, 0x28, 0x44, 0x44, 0x38, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x28, 0x00,
|
||||
0x38, 0x44, 0x44, 0x28, 0x7F, 0x00,
|
||||
0x38, 0x54, 0x54, 0x54, 0x18, 0x00,
|
||||
0x00, 0x08, 0x7E, 0x09, 0x02, 0x00,
|
||||
0x18, 0x24, 0x24, 0x1C, 0x78, 0x00,
|
||||
0x7F, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x00, 0x44, 0x7D, 0x40, 0x00, 0x00,
|
||||
0x20, 0x40, 0x40, 0x3D, 0x00, 0x00,
|
||||
0x7F, 0x10, 0x28, 0x44, 0x00, 0x00,
|
||||
0x00, 0x41, 0x7F, 0x40, 0x00, 0x00,
|
||||
0x7C, 0x04, 0x78, 0x04, 0x78, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x78, 0x00,
|
||||
0x38, 0x44, 0x44, 0x44, 0x38, 0x00,
|
||||
0x7C, 0x18, 0x24, 0x24, 0x18, 0x00,
|
||||
0x18, 0x24, 0x24, 0x18, 0x7C, 0x00,
|
||||
0x7C, 0x08, 0x04, 0x04, 0x08, 0x00,
|
||||
0x48, 0x54, 0x54, 0x54, 0x24, 0x00,
|
||||
0x04, 0x04, 0x3F, 0x44, 0x24, 0x00,
|
||||
0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00,
|
||||
0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00,
|
||||
0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00,
|
||||
0x44, 0x28, 0x10, 0x28, 0x44, 0x00,
|
||||
0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00,
|
||||
0x44, 0x64, 0x54, 0x4C, 0x44, 0x00,
|
||||
0x00, 0x08, 0x36, 0x41, 0x00, 0x00,
|
||||
0x00, 0x00, 0x77, 0x00, 0x00, 0x00,
|
||||
0x00, 0x41, 0x36, 0x08, 0x00, 0x00,
|
||||
0x02, 0x01, 0x02, 0x04, 0x02, 0x00,
|
||||
0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0xE0, 0xF0,
|
||||
0x78, 0x1C, 0x0E, 0x06, 0x06, 0x06,
|
||||
0x06, 0x06, 0x0E, 0x0C, 0x0C, 0x18,
|
||||
0x00, 0x00, 0x00, 0x00, 0x80, 0x80,
|
||||
0x80, 0x80, 0x80, 0x80, 0x80, 0x80,
|
||||
0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0,
|
||||
0xC0, 0xFF, 0xFF, 0xC0, 0xC0, 0xC0,
|
||||
0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00,
|
||||
0xFF, 0xFF, 0x03, 0x03, 0x03, 0x03,
|
||||
0x03, 0x03, 0x03, 0x07, 0x0E, 0x1C,
|
||||
0xF8, 0xF0, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0xFC, 0xFC,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0xE0, 0x78, 0x1E, 0x00,
|
||||
0x00, 0x00, 0x00, 0xF8, 0xF8, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,
|
||||
0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
|
||||
0x00, 0x00, 0x00, 0xE0, 0xFE, 0xFF,
|
||||
0xFE, 0xF8, 0xC0, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0xE0, 0xFC, 0xFF, 0xFE,
|
||||
0xF0, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x01, 0x3E,
|
||||
0xE0, 0x80, 0x70, 0x0E, 0x01, 0x00,
|
||||
0x00, 0x00, 0x00, 0x07, 0x3C, 0xE0,
|
||||
0x80, 0x78, 0x07, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
|
||||
0x70, 0x30, 0x30, 0x30, 0xB0, 0xF0,
|
||||
0xF0, 0x00, 0xFE, 0xFF, 0x33, 0x31,
|
||||
0x31, 0x31, 0x31, 0x31, 0x31, 0x33,
|
||||
0x3F, 0x1C, 0x00, 0x00, 0x00, 0x00,
|
||||
0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0xFF, 0xFF, 0x18, 0x18, 0x18, 0x18,
|
||||
0x18, 0x18, 0x08, 0x0C, 0x0E, 0x07,
|
||||
0x03, 0x03, 0x00, 0x00, 0x00, 0xFF,
|
||||
0xFF, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF,
|
||||
0x00, 0x00, 0x00, 0xF8, 0xFE, 0x0F,
|
||||
0x07, 0x03, 0x03, 0x03, 0x03, 0x02,
|
||||
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
|
||||
0xE0, 0xF0, 0x38, 0x1F, 0x0F, 0x00,
|
||||
0x00, 0x00, 0x80, 0xE0, 0x70, 0x38,
|
||||
0x18, 0x18, 0x18, 0xFF, 0xFF, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x40, 0xC0, 0xF0, 0xFC, 0x7E, 0x4E,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0xF8, 0xFF, 0xFF, 0x1F,
|
||||
0x07, 0x1F, 0xFF, 0xFE, 0xF0, 0xC0,
|
||||
0xF8, 0xFF, 0x7F, 0x0F, 0x07, 0x7F,
|
||||
0xFF, 0xFE, 0xFC, 0x04, 0x04, 0x78,
|
||||
0x80, 0x00, 0x00, 0x00, 0xC0, 0x38,
|
||||
0x0C, 0x1C, 0x60, 0x80, 0x00, 0x00,
|
||||
0x00, 0xF0, 0x0C, 0x04, 0xF4, 0x1C,
|
||||
0x80, 0xC0, 0xFC, 0xE6, 0xC3, 0xC1,
|
||||
0xC1, 0xC3, 0xE6, 0xFC, 0xC0, 0x80,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
|
||||
0x03, 0x06, 0x0E, 0x0C, 0x0C, 0x0C,
|
||||
0x0C, 0x0C, 0x0C, 0x0E, 0x07, 0x03,
|
||||
0x00, 0x00, 0x01, 0x03, 0x07, 0x06,
|
||||
0x0E, 0x0C, 0x0C, 0x0C, 0x06, 0x06,
|
||||
0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
|
||||
0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x1F, 0x0F, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
|
||||
0x07, 0x0E, 0x0C, 0x0C, 0x0C, 0x0C,
|
||||
0x0C, 0x06, 0x07, 0x03, 0x1F, 0x1F,
|
||||
0x00, 0x00, 0x00, 0x00, 0x03, 0x06,
|
||||
0x0E, 0x0C, 0x0C, 0x0C, 0x0C, 0x06,
|
||||
0x06, 0x00, 0x00, 0x00, 0x1F, 0x1F,
|
||||
0x00, 0x01, 0x07, 0x0E, 0x18, 0x10,
|
||||
0x00, 0x00, 0x07, 0x1F, 0x18, 0x30,
|
||||
0x30, 0x30, 0x30, 0x1F, 0x0F, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x18, 0x3C, 0x3C, 0x1C, 0x00,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
||||
0x00, 0x1F, 0x1F, 0x1F, 0x07, 0x00,
|
||||
0x00, 0x00, 0x00, 0x03, 0x1F, 0x1F,
|
||||
0x0F, 0x01, 0x00, 0x00, 0x00, 0x00,
|
||||
0x07, 0x1F, 0x1F, 0x1E, 0xF8, 0x00,
|
||||
0x0F, 0x70, 0x30, 0x0E, 0xC1, 0x38,
|
||||
0x07, 0x0E, 0x70, 0x83, 0x1C, 0x60,
|
||||
0x1E, 0x03, 0xC0, 0x3E, 0x01, 0x00,
|
||||
0x3F, 0x7F, 0xFF, 0xFF, 0xF9, 0xC0,
|
||||
0xC0, 0xF9, 0xFF, 0xFF, 0x7F, 0x3F,
|
||||
};
|
||||
13
keyboards/mechwild/puckbuddy/halconf.h
Normal file
13
keyboards/mechwild/puckbuddy/halconf.h
Normal file
|
|
@ -0,0 +1,13 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
|
||||
#pragma once
|
||||
|
||||
#define HAL_USE_I2C TRUE
|
||||
|
||||
#define HAL_USE_SPI TRUE
|
||||
#define SPI_USE_WAIT TRUE
|
||||
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
|
||||
|
||||
#include_next <halconf.h>
|
||||
25
keyboards/mechwild/puckbuddy/info.json
Normal file
25
keyboards/mechwild/puckbuddy/info.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"keyboard_name": "MechWild PuckBuddy",
|
||||
"url": "mechwild.com",
|
||||
"maintainer": "kylemccreery",
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label":"k00", "x":0, "y":0},
|
||||
{"label":"k01", "x":1.5, "y":0},
|
||||
{"label":"k02", "x":2.5, "y":0},
|
||||
{"label":"k03", "x":3.5, "y":0},
|
||||
{"label":"k05", "x":5, "y":0},
|
||||
{"label":"k10", "x":0, "y":1.25},
|
||||
{"label":"k15", "x":5, "y":1.25},
|
||||
{"label":"k20", "x":0, "y":2.25},
|
||||
{"label":"k25", "x":5, "y":2.25},
|
||||
{"label":"k30", "x":0, "y":3.25},
|
||||
{"label":"k35", "x":5, "y":3.25},
|
||||
{"label":"k31", "x":1, "y":4.5},
|
||||
{"label":"k32", "x":2, "y":4.5},
|
||||
{"label":"k33", "x":3, "y":4.5},
|
||||
{"label":"k34", "x":4, "y":4.5}]
|
||||
}
|
||||
}
|
||||
}
|
||||
64
keyboards/mechwild/puckbuddy/keymaps/default/keymap.c
Normal file
64
keyboards/mechwild/puckbuddy/keymaps/default/keymap.c
Normal file
|
|
@ -0,0 +1,64 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
/* Physical Layout:
|
||||
* /-------------------\
|
||||
* |ENC| 1 | 2 | 3 |ENC|
|
||||
* |---+---'---'---+---|
|
||||
* | 4 | | 5 |
|
||||
* |---| |---|
|
||||
* | 6 | | 7 |
|
||||
* |---| |---|
|
||||
* | 8 | | 9 |
|
||||
* \-----,---,---,-----/
|
||||
* | A | B | C | D |
|
||||
* \---'---'---'---/
|
||||
*
|
||||
* Keymap Layout:
|
||||
* ENC, 1, 2, 3, ENC,
|
||||
* 4, 5,
|
||||
* 6, 7,
|
||||
* 8, A, B, C, D, 9,
|
||||
*
|
||||
*/
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT(
|
||||
KC_MUTE, MO(_FN3), MO(_FN2), MO(_FN1), LGUI(KC_D),
|
||||
MO(_FN2), KC_HOME,
|
||||
MO(_FN3), KC_END,
|
||||
KC_BTN3, DPI_FINE,
|
||||
KC_BTN1, KC_BTN2, KC_BTN2, KC_BTN1
|
||||
),
|
||||
[_FN1] = LAYOUT(
|
||||
RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, TAP_TOG,
|
||||
DPI_UP, TAP_UP,
|
||||
DPI_DN, TAP_DN,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_HOME, KC_PGUP, KC_PGDN, KC_END
|
||||
),
|
||||
[_FN2] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, RGB_MOD,
|
||||
KC_TRNS, RGB_RMOD,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN3] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
64
keyboards/mechwild/puckbuddy/keymaps/via/keymap.c
Normal file
64
keyboards/mechwild/puckbuddy/keymaps/via/keymap.c
Normal file
|
|
@ -0,0 +1,64 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines names for use in layer keycodes and the keymap
|
||||
enum layer_names {
|
||||
_BASE,
|
||||
_FN1,
|
||||
_FN2,
|
||||
_FN3
|
||||
};
|
||||
|
||||
/* Physical Layout:
|
||||
* /-------------------\
|
||||
* |ENC| 1 | 2 | 3 |ENC|
|
||||
* |---+---'---'---+---|
|
||||
* | 4 | | 5 |
|
||||
* |---| |---|
|
||||
* | 6 | | 7 |
|
||||
* |---| |---|
|
||||
* | 8 | | 9 |
|
||||
* \-----,---,---,-----/
|
||||
* | A | B | C | D |
|
||||
* \---'---'---'---/
|
||||
*
|
||||
* Keymap Layout:
|
||||
* ENC, 1, 2, 3, ENC,
|
||||
* 4, 5,
|
||||
* 6, 7,
|
||||
* 8, A, B, C, D, 9,
|
||||
*
|
||||
*/
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_BASE] = LAYOUT(
|
||||
KC_MUTE, MO(_FN3), MO(_FN2), MO(_FN1), LGUI(KC_D),
|
||||
MO(_FN2), KC_HOME,
|
||||
MO(_FN3), KC_END,
|
||||
KC_BTN3, DPI_FINE,
|
||||
KC_BTN1, KC_BTN2, KC_BTN2, KC_BTN1
|
||||
),
|
||||
[_FN1] = LAYOUT(
|
||||
RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, TAP_TOG,
|
||||
DPI_UP, TAP_UP,
|
||||
DPI_DN, TAP_DN,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_HOME, KC_PGUP, KC_PGDN, KC_END
|
||||
),
|
||||
[_FN2] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG,
|
||||
KC_TRNS, RGB_MOD,
|
||||
KC_TRNS, RGB_RMOD,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
[_FN3] = LAYOUT(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
)
|
||||
};
|
||||
1
keyboards/mechwild/puckbuddy/keymaps/via/rules.mk
Normal file
1
keyboards/mechwild/puckbuddy/keymaps/via/rules.mk
Normal file
|
|
@ -0,0 +1 @@
|
|||
VIA_ENABLE = yes
|
||||
88
keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld
Normal file
88
keyboards/mechwild/puckbuddy/ld/STM32F401xE.ld
Normal file
|
|
@ -0,0 +1,88 @@
|
|||
/*
|
||||
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
|
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License");
|
||||
you may not use this file except in compliance with the License.
|
||||
You may obtain a copy of the License at
|
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software
|
||||
distributed under the License is distributed on an "AS IS" BASIS,
|
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
See the License for the specific language governing permissions and
|
||||
limitations under the License.
|
||||
*/
|
||||
|
||||
/*
|
||||
* STM32F401xE memory setup.
|
||||
*/
|
||||
MEMORY
|
||||
{
|
||||
flash0 (rx) : org = 0x08000000, len = 16k /* tinyuf2 bootloader requires app to be located at 64k offset for this MCU */
|
||||
flash1 (rx) : org = 0x08004000, len = 16k
|
||||
flash2 (rx) : org = 0x08008000, len = 16k /* emulated eeprom */
|
||||
flash3 (rx) : org = 0x0800C000, len = 16k
|
||||
flash4 (rx) : org = 0x08010000, len = 512k - 64k
|
||||
flash5 (rx) : org = 0x00000000, len = 0
|
||||
flash6 (rx) : org = 0x00000000, len = 0
|
||||
flash7 (rx) : org = 0x00000000, len = 0
|
||||
ram0 (wx) : org = 0x20000000, len = 96k
|
||||
ram1 (wx) : org = 0x00000000, len = 0
|
||||
ram2 (wx) : org = 0x00000000, len = 0
|
||||
ram3 (wx) : org = 0x00000000, len = 0
|
||||
ram4 (wx) : org = 0x00000000, len = 0
|
||||
ram5 (wx) : org = 0x00000000, len = 0
|
||||
ram6 (wx) : org = 0x00000000, len = 0
|
||||
ram7 (wx) : org = 0x00000000, len = 0
|
||||
}
|
||||
|
||||
/* For each data/text section two region are defined, a virtual region
|
||||
and a load region (_LMA suffix).*/
|
||||
|
||||
/* Flash region to be used for exception vectors.*/
|
||||
REGION_ALIAS("VECTORS_FLASH", flash4);
|
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for constructors and destructors.*/
|
||||
REGION_ALIAS("XTORS_FLASH", flash4);
|
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for code text.*/
|
||||
REGION_ALIAS("TEXT_FLASH", flash4);
|
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for read only data.*/
|
||||
REGION_ALIAS("RODATA_FLASH", flash4);
|
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for various.*/
|
||||
REGION_ALIAS("VARIOUS_FLASH", flash4);
|
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash4);
|
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/
|
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing
|
||||
of all exceptions and interrupts.*/
|
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by
|
||||
the main() function.*/
|
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for data segment.*/
|
||||
REGION_ALIAS("DATA_RAM", ram0);
|
||||
REGION_ALIAS("DATA_RAM_LMA", flash4);
|
||||
|
||||
/* RAM region to be used for BSS segment.*/
|
||||
REGION_ALIAS("BSS_RAM", ram0);
|
||||
|
||||
/* RAM region to be used for the default heap.*/
|
||||
REGION_ALIAS("HEAP_RAM", ram0);
|
||||
|
||||
/* Generic rules inclusion.*/
|
||||
INCLUDE rules.ld
|
||||
|
||||
/* TinyUF2 bootloader reset support */
|
||||
_board_dfu_dbl_tap = ORIGIN(ram0) + 64k - 4; /* this is based off the linker file for tinyuf2 */
|
||||
12
keyboards/mechwild/puckbuddy/mcuconf.h
Normal file
12
keyboards/mechwild/puckbuddy/mcuconf.h
Normal file
|
|
@ -0,0 +1,12 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include_next <mcuconf.h>
|
||||
|
||||
#undef STM32_I2C_USE_I2C1
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
|
||||
#undef STM32_SPI_USE_SPI1
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
7
keyboards/mechwild/puckbuddy/post_rules.mk
Normal file
7
keyboards/mechwild/puckbuddy/post_rules.mk
Normal file
|
|
@ -0,0 +1,7 @@
|
|||
ifeq ($(strip $(BOOTLOADER)), tinyuf2)
|
||||
ifndef EEPROM_DRIVER
|
||||
MCU_LDSCRIPT = STM32F401xE
|
||||
EEPROM_DRIVER = vendor
|
||||
UF2_BUILD = yes
|
||||
endif
|
||||
endif
|
||||
307
keyboards/mechwild/puckbuddy/puckbuddy.c
Normal file
307
keyboards/mechwild/puckbuddy/puckbuddy.c
Normal file
|
|
@ -0,0 +1,307 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "puckbuddy.h"
|
||||
|
||||
#ifndef GLIDEPOINT_DPI_OPTIONS
|
||||
# define GLIDEPOINT_DPI_OPTIONS \
|
||||
{ 400, 800, 1200, 1600, 2000, 2400, 2800, 3200, 3600, 4000 }
|
||||
# ifndef GLIDEPOINT_DPI_DEFAULT
|
||||
# define GLIDEPOINT_DPI_DEFAULT 1
|
||||
# endif
|
||||
#endif
|
||||
#ifndef GLIDEPOINT_DPI_DEFAULT
|
||||
# define GLIDEPOINT_DPI_DEFAULT 1
|
||||
#endif
|
||||
|
||||
keyboard_config_t keyboard_config;
|
||||
uint16_t dpi_array[] = GLIDEPOINT_DPI_OPTIONS;
|
||||
#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
|
||||
|
||||
void board_init(void) {
|
||||
// B9 is configured as I2C1_SDA in the board file; that function must be
|
||||
// disabled before using B7 as I2C1_SDA.
|
||||
setPinInputHigh(B9);
|
||||
}
|
||||
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE
|
||||
void tap_modify(int change_value, bool tap_status) {
|
||||
if (keyboard_config.dt_term_config < 0) {
|
||||
keyboard_config.dt_term_config *= -1;
|
||||
}
|
||||
|
||||
keyboard_config.dt_term_config += change_value;
|
||||
|
||||
if (tap_status == false ) {
|
||||
keyboard_config.dt_term_config *= -1;
|
||||
g_tapping_term = 0;
|
||||
} else {
|
||||
g_tapping_term = keyboard_config.dt_term_config;
|
||||
}
|
||||
eeconfig_update_kb(keyboard_config.raw);
|
||||
}
|
||||
|
||||
void tap_toggle(void) {
|
||||
keyboard_config.dt_term_config *= -1;
|
||||
if (keyboard_config.dt_term_config > 0) {
|
||||
g_tapping_term = keyboard_config.dt_term_config;
|
||||
} else {
|
||||
g_tapping_term = 0;
|
||||
}
|
||||
eeconfig_update_kb(keyboard_config.raw);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef DIP_SWITCH_ENABLE
|
||||
bool dip_switch_update_kb(uint8_t index, bool active) {
|
||||
if (!dip_switch_update_user(index, active)) { return false; }
|
||||
switch (index) {
|
||||
case 0:
|
||||
if(active) { tap_code(KC_CLCK); }
|
||||
break;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ENCODER_ENABLE
|
||||
bool encoder_update_kb(uint8_t index, bool clockwise) {
|
||||
if (!encoder_update_user(index, clockwise)) { return false; }
|
||||
switch (index) {
|
||||
case 0:
|
||||
if (clockwise) {
|
||||
tap_code(KC_VOLU);
|
||||
} else {
|
||||
tap_code(KC_VOLD);
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
if (clockwise) {
|
||||
tap_code(KC_PGUP);
|
||||
} else {
|
||||
tap_code(KC_PGDN);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef OLED_ENABLE // OLED Functionality
|
||||
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
|
||||
return OLED_ROTATION_180; // flips the display 180 degrees
|
||||
}
|
||||
|
||||
bool clear_screen = true; // used to manage singular screen clears to prevent display glitch
|
||||
bool clear_screen_art = true; // used to manage singular screen clears to prevent display glitch
|
||||
static void render_name(void) { // Render Puckbuddy "Get Puck'd" text
|
||||
static const char PROGMEM name_1[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xB6, 0xB6, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x00};
|
||||
static const char PROGMEM name_2[] = {0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xB6, 0xB6, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0x00};
|
||||
static const char PROGMEM name_3[] = {0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xB6, 0xB6, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0x00};
|
||||
oled_set_cursor(0,0);
|
||||
oled_write_P(name_1, false);
|
||||
oled_set_cursor(0,1);
|
||||
oled_write_P(name_2, false);
|
||||
oled_set_cursor(0,2);
|
||||
oled_write_P(name_3, false);
|
||||
}
|
||||
|
||||
static void render_logo(void) { // Render MechWild "MW" Logo
|
||||
static const char PROGMEM logo_1[] = {0x97, 0x98, 0x99, 0x9A,0x00};
|
||||
static const char PROGMEM logo_2[] = {0xB7, 0xB8, 0xB9, 0xBA, 0xBB, 0xBC, 0xBD, 0x00};
|
||||
static const char PROGMEM logo_3[] = {0xD7, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xB6, 0x00};
|
||||
static const char PROGMEM logo_4[] = {0xB6, 0xB6, 0xB6, 0x9B, 0x9C, 0x9D, 0x9E, 0x00};
|
||||
oled_set_cursor(0,0);
|
||||
oled_write_P(logo_1, false);
|
||||
oled_set_cursor(0,1);
|
||||
oled_write_P(logo_2, false);
|
||||
oled_set_cursor(0,2);
|
||||
oled_write_P(logo_3, false);
|
||||
oled_set_cursor(0,3);
|
||||
oled_write_P(logo_4, false);
|
||||
}
|
||||
|
||||
bool oled_task_kb(void) {
|
||||
if(!oled_task_user()) {
|
||||
return false;
|
||||
}
|
||||
if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && IS_HOST_LED_OFF(USB_LED_SCROLL_LOCK) && get_highest_layer(layer_state) == 0 ) {
|
||||
if (clear_screen_art == true) {
|
||||
oled_clear();
|
||||
oled_render();
|
||||
clear_screen_art = false;
|
||||
}
|
||||
render_name();
|
||||
oled_set_cursor(0,3);
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
oled_write_P(PSTR(" DPI:"), false);
|
||||
oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false);
|
||||
#endif
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically
|
||||
oled_write_P(PSTR(" TAP:"), false);
|
||||
if (keyboard_config.dt_term_config < 0) {
|
||||
oled_write_P(PSTR("Off "), false);
|
||||
} else {
|
||||
oled_write(get_u16_str(g_tapping_term, ' '), false);
|
||||
}
|
||||
#endif
|
||||
clear_screen = true;
|
||||
} else {
|
||||
if (clear_screen == true) {
|
||||
oled_clear();
|
||||
oled_render();
|
||||
clear_screen = false;
|
||||
}
|
||||
render_logo();
|
||||
oled_set_cursor(8,1);
|
||||
switch (get_highest_layer(layer_state)) {
|
||||
case 0:
|
||||
oled_write_P(PSTR("Layer 0"), false);
|
||||
break;
|
||||
case 1:
|
||||
oled_write_P(PSTR("Layer 1"), false);
|
||||
break;
|
||||
case 2:
|
||||
oled_write_P(PSTR("Layer 2"), false);
|
||||
break;
|
||||
case 3:
|
||||
oled_write_P(PSTR("Layer 3"), false);
|
||||
break;
|
||||
default:
|
||||
oled_write_P(PSTR("Layer ?"), false); // Should never display, here as a catchall
|
||||
}
|
||||
led_t led_state = host_keyboard_led_state();
|
||||
oled_set_cursor(8,0);
|
||||
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
|
||||
oled_write_P(led_state.scroll_lock ? PSTR("SCR") : PSTR(" "), false);
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
oled_set_cursor(8,2);
|
||||
oled_write_P(PSTR("DPI:"), false);
|
||||
oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false);
|
||||
#endif
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically
|
||||
oled_set_cursor(8,3);
|
||||
oled_write_P(PSTR("TAP:"), false);
|
||||
if (keyboard_config.dt_term_config < 0) {
|
||||
oled_write_P(PSTR("Off "), false);
|
||||
} else {
|
||||
oled_write(get_u16_str(g_tapping_term, ' '), false);
|
||||
}
|
||||
#endif
|
||||
clear_screen_art = true;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
#endif
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
|
||||
switch(keycode) {
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
case DPI_UP:
|
||||
if (record->event.pressed) {
|
||||
keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE;
|
||||
eeconfig_update_kb(keyboard_config.raw);
|
||||
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
|
||||
}
|
||||
return false;
|
||||
case DPI_DN:
|
||||
if (record->event.pressed) {
|
||||
if (keyboard_config.dpi_config > 0) {
|
||||
keyboard_config.dpi_config = (keyboard_config.dpi_config - 1) % DPI_OPTION_SIZE;
|
||||
} else {
|
||||
keyboard_config.dpi_config = DPI_OPTION_SIZE - 1;
|
||||
}
|
||||
eeconfig_update_kb(keyboard_config.raw);
|
||||
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
|
||||
}
|
||||
return false;
|
||||
case DPI_FINE:
|
||||
if (record->event.pressed) {
|
||||
pointing_device_set_cpi(dpi_array[0]);
|
||||
} else {
|
||||
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
|
||||
}
|
||||
return false;
|
||||
#endif
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only include tap info keycodes if it is being configured dynamically
|
||||
case TAP_UP:
|
||||
if (record->event.pressed) {
|
||||
tap_modify(DYNAMIC_TAPPING_TERM_INCREMENT, true);
|
||||
}
|
||||
return false;
|
||||
case TAP_DN:
|
||||
if (record->event.pressed) {
|
||||
if (keyboard_config.dt_term_config > 0) {
|
||||
tap_modify(-1 * DYNAMIC_TAPPING_TERM_INCREMENT, true);
|
||||
}
|
||||
}
|
||||
return false;
|
||||
case TAP_ON:
|
||||
if (record->event.pressed) {
|
||||
tap_modify(0, true);
|
||||
}
|
||||
return false;
|
||||
case TAP_OFF:
|
||||
if (record->event.pressed) {
|
||||
tap_modify(0, false);
|
||||
}
|
||||
return false;
|
||||
case TAP_TOG:
|
||||
if (record->event.pressed) {
|
||||
tap_toggle();
|
||||
}
|
||||
return false;
|
||||
#endif
|
||||
}
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void pointing_device_init_kb(void) {
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
|
||||
#endif
|
||||
}
|
||||
|
||||
void eeconfig_init_kb(void) {
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
keyboard_config.dpi_config = GLIDEPOINT_DPI_DEFAULT;
|
||||
#endif
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only set tap term from eeprom if it is being configured dynamically
|
||||
keyboard_config.dt_term_config = TAPPING_TERM;
|
||||
#endif
|
||||
eeconfig_update_kb(keyboard_config.raw);
|
||||
eeconfig_init_user();
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// is safe to just read DPI setting since matrix init
|
||||
// comes before pointing device init.
|
||||
keyboard_config.raw = eeconfig_read_kb();
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
if (keyboard_config.dpi_config > DPI_OPTION_SIZE) {
|
||||
eeconfig_init_kb();
|
||||
}
|
||||
#endif
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void keyboard_post_init_kb(void) {
|
||||
#ifdef POINTING_DEVICE_ENABLE
|
||||
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
|
||||
#endif
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
rgblight_toggle_noeeprom(); //double toggle post init removes the weirdness with rgb strips having a yellow first LED
|
||||
rgblight_toggle_noeeprom();
|
||||
#endif
|
||||
#ifdef DYNAMIC_TAPPING_TERM_ENABLE
|
||||
tap_toggle(); // Need it to reevaluate this setting after initiating so that it is current after init
|
||||
tap_toggle();
|
||||
#endif
|
||||
keyboard_post_init_user();
|
||||
#ifdef OLED_ENABLE // purposefully after user post init to allow the RGB to startup first
|
||||
wait_ms(200); // Avoids a startup issue where the oled renders and then turns off with blackpill
|
||||
oled_on();
|
||||
#endif
|
||||
}
|
||||
56
keyboards/mechwild/puckbuddy/puckbuddy.h
Normal file
56
keyboards/mechwild/puckbuddy/puckbuddy.h
Normal file
|
|
@ -0,0 +1,56 @@
|
|||
// Copyright 2022 Kyle McCreery (@kylemccreery)
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define ___ KC_NO
|
||||
|
||||
/* This is a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k05,\
|
||||
k10, k15,\
|
||||
k20, k25,\
|
||||
k30, k35,\
|
||||
k31, k32, k33, k34 \
|
||||
) { \
|
||||
{ k00, k01, k05, k31 }, \
|
||||
{ k10, k02, k15, k32 }, \
|
||||
{ k20, k03, k25, k33 }, \
|
||||
{ k30, ___, k35, k34 } \
|
||||
}
|
||||
|
||||
typedef union {
|
||||
uint32_t raw;
|
||||
struct {
|
||||
uint8_t dpi_config;
|
||||
int16_t dt_term_config;
|
||||
};
|
||||
} keyboard_config_t;
|
||||
|
||||
extern keyboard_config_t keyboard_config;
|
||||
extern uint16_t dpi_array[];
|
||||
|
||||
enum keyboard_keycodes {
|
||||
#ifdef VIA_ENABLE
|
||||
DPI_UP = USER00,
|
||||
#else
|
||||
DPI_UP = SAFE_RANGE,
|
||||
#endif
|
||||
DPI_DN,
|
||||
DPI_FINE,
|
||||
TAP_UP,
|
||||
TAP_DN,
|
||||
TAP_ON,
|
||||
TAP_OFF,
|
||||
TAP_TOG,
|
||||
NEW_SAFE_RANGE
|
||||
};
|
||||
27
keyboards/mechwild/puckbuddy/readme.md
Normal file
27
keyboards/mechwild/puckbuddy/readme.md
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
# PuckBuddy
|
||||
|
||||
|
||||
|
||||
A macropad with a Cirque Glidepoint Trackpad in the middle, powered by the STM32 Blackpill.
|
||||
|
||||
* Keyboard Maintainer: [Kyle McCreery](https://github.com/kylemccreery)
|
||||
* Hardware Supported: PuckBuddy v1.0
|
||||
* Hardware Availability: [PuckBuddy on MechWild](https://mechwild.com/product/puckbuddy/)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make mechwild/puckbuddy:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make mechwild/puckbuddy:default:flash
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (assigned to the top left key) and plug in the keyboard while holding it.
|
||||
* **Physical reset button**: Press and hold the boot0 button on the blackpill, tap and release the nrst button on the blackpill, then release the boot0 button.
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available. By default this is the top right key on layer 1.
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
27
keyboards/mechwild/puckbuddy/rules.mk
Normal file
27
keyboards/mechwild/puckbuddy/rules.mk
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
# MCU name
|
||||
MCU = STM32F401
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = stm32-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
ENCODER_ENABLE = yes # Encoder Enabled
|
||||
OLED_ENABLE = yes # OLED Enabled
|
||||
OLED_DRIVER = SSD1306 # OLED Driver
|
||||
DIP_SWITCH_ENABLE = yes # Dip Switch Enabled
|
||||
|
||||
POINTING_DEVICE_ENABLE = yes # Pointing Device Enabled
|
||||
POINTING_DEVICE_DRIVER = cirque_pinnacle_spi # Pointing Device Driver
|
||||
|
||||
DYNAMIC_TAPPING_TERM_ENABLE = yes # Enable Dynamic Tapping Term to control the Tap term for the Cirque Pad easily
|
||||
Loading…
Reference in New Issue
Block a user