mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-26 10:27:52 +06:00
[Keyboard] Update Tractyl Manuform config for F411 (#14770)
This commit is contained in:
Drashna Jaelre
GitHub
parent
f90d8b35f2
commit
82bf688e44
|
|
@ -31,22 +31,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define USB_VBUS_PIN B10
|
||||
// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */
|
||||
#define SPLIT_HAND_PIN C14 // high = left, low = right
|
||||
|
||||
// WS2812 RGB LED strip input and number of LEDs
|
||||
#define RGB_DI_PIN A1
|
||||
#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2
|
||||
#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
|
||||
#define WS2812_PWM_CHANNEL 2 // default: 2
|
||||
#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
||||
#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
|
||||
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
|
||||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||
#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||
#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||
#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
|
||||
|
||||
#define RGBLED_NUM 20
|
||||
#define RGBLIGHT_SPLIT
|
||||
#define RGBLED_SPLIT \
|
||||
{ 10, 10 }
|
||||
#define RGBLIGHT_LIMIT_VAL 80
|
||||
|
||||
#define DEBUG_LED_PIN C13
|
||||
|
||||
|
|
@ -68,13 +69,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
/* i2c config for oleds */
|
||||
#define I2C_DRIVER I2CD1
|
||||
#define I2C1_SCL_BANK GPIOB
|
||||
#define I2C1_SDA_BANK GPIOB
|
||||
#define I2C1_SCL 8
|
||||
#define I2C1_SDA 9
|
||||
#define I2C1_SCL_PIN B8
|
||||
#define I2C1_SDA_PIN B9
|
||||
#define I2C1_SCL_PAL_MODE 4
|
||||
#define I2C1_SDA_PAL_MODE 4
|
||||
#define I2C1_CLOCK_SPEED 400000
|
||||
// #define I2C1_CLOCK_SPEED 400000
|
||||
/* For Legacy Compatibility: */
|
||||
#define I2C1_SCL 8
|
||||
#define I2C1_SDA 9
|
||||
|
||||
/* encoder config */
|
||||
#define ENCODERS_PAD_A \
|
||||
|
|
@ -93,7 +95,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
/* eeprom config */
|
||||
#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4
|
||||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8
|
||||
#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64
|
||||
// #define EXTERNAL_EEPROM_BYTE_COUNT 8196
|
||||
// #define EXTERNAL_EEPROM_PAGE_SIZE 32
|
||||
// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2
|
||||
|
|
@ -102,4 +104,4 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
/* pmw3360 config */
|
||||
#define PMW3360_CS_PIN B0
|
||||
#define PMW3360_SPI_MODE 3
|
||||
#define PMW3360_SPI_DIVISOR 4
|
||||
#define PMW3360_SPI_DIVISOR 64
|
||||
|
|
|
|||
|
|
@ -24,8 +24,10 @@ void matrix_scan_sub_kb(void) {
|
|||
}
|
||||
}
|
||||
|
||||
#ifdef USB_VBUS_PIN
|
||||
bool usb_vbus_state(void) {
|
||||
setPinInputLow(USB_VBUS_PIN);
|
||||
wait_us(5);
|
||||
return readPin(USB_VBUS_PIN);
|
||||
}
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -21,17 +21,35 @@
|
|||
#undef STM32_I2C_USE_I2C1
|
||||
#define STM32_I2C_USE_I2C1 TRUE
|
||||
|
||||
#undef STM32_PWM_USE_TIM5
|
||||
#define STM32_PWM_USE_TIM5 TRUE
|
||||
#undef STM32_I2C_I2C1_RX_DMA_STREAM
|
||||
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0)
|
||||
#undef STM32_I2C_I2C1_TX_DMA_STREAM
|
||||
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
|
||||
|
||||
#undef STM32_PWM_USE_TIM2
|
||||
#define STM32_PWM_USE_TIM2 TRUE
|
||||
|
||||
#undef STM32_PWM_USE_TIM3
|
||||
#define STM32_PWM_USE_TIM3 TRUE
|
||||
|
||||
#undef STM32_SPI_USE_SPI1
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
#define STM32_SPI_USE_SPI1 TRUE
|
||||
|
||||
#undef STM32_SPI_SPI1_RX_DMA_STREAM
|
||||
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0)
|
||||
#undef STM32_SPI_SPI1_TX_DMA_STREAM
|
||||
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
||||
|
||||
#undef STM32_SERIAL_USE_USART2
|
||||
#define STM32_SERIAL_USE_USART2 TRUE
|
||||
|
||||
#undef STM32_UART_USART2_RX_DMA_STREAM
|
||||
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
|
||||
#undef STM32_UART_USART2_TX_DMA_STREAM
|
||||
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
|
||||
|
||||
#undef STM32_GPT_USE_TIM4
|
||||
#define STM32_GPT_USE_TIM4 TRUE
|
||||
|
||||
#undef STM32_ST_USE_TIMER
|
||||
#define STM32_ST_USE_TIMER 5
|
||||
|
|
|
|||
|
|
@ -4,11 +4,12 @@
|
|||
* Split Hand Pin, using PC14
|
||||
* Full Duplex Serial/USART using PA3 and PA4 on USART2
|
||||
* PWM Audio using PB1 and TIM3 and GPT on TIM4
|
||||
* PWM RGB using PA1 TIM5
|
||||
* PWM RGB using PA1 TIM2
|
||||
* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
|
||||
* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
|
||||
* Encoder using PA10 and PA12
|
||||
* Encoder using PA13 and PA14
|
||||
* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
|
||||
* Pull-up resistor (22k) on A10 to fix reset issue.
|
||||
|
||||
* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
|
||||
* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)
|
||||
|
|
|
|||
|
|
@ -117,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
[_ADJUST] = LAYOUT_5x6_right_wrapper(
|
||||
KC_MAKE, ___________________BLANK___________________, _________________ADJUST_R1_________________, KC_RST,
|
||||
VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST,
|
||||
UC_MOD, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
|
||||
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
_______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
|
||||
UC_MOD, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
|
||||
HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO,
|
||||
HPT_TOG, HPT_BUZ, KC_NUKE,
|
||||
_______, _______, _______,
|
||||
|
|
@ -350,7 +350,7 @@ void render_kitty(void) {
|
|||
// assumes 1 frame prep stage
|
||||
extern bool swap_hands;
|
||||
void animation_phase(void) {
|
||||
if (swap_hands) {
|
||||
if (tap_toggling) {
|
||||
anim_frame_duration = 300;
|
||||
current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
|
||||
oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);
|
||||
|
|
|
|||
|
|
@ -1,159 +1,25 @@
|
|||
Dactyl Manuform (4x5, 5x6, 5x7, 6x6)
|
||||
======
|
||||
# Tractyl Manuform (4x6, 5x6)
|
||||
|
||||
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link.
|
||||
|
||||
|
||||
|
||||
* Keyboard Maintainer: [drashna](https://github.com/drashna)
|
||||
* Hardware Supported: Teensy 2.0++, WeAct BlackPill F411
|
||||
|
||||
## First Time Setup
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using:
|
||||
make handwired/tractyl_manuform/5x6_right/f411/drashna:default
|
||||
|
||||
Depending on your Layout chose one of the follwing commands:
|
||||
Flashing example for this keyboard:
|
||||
|
||||
```
|
||||
$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME
|
||||
```
|
||||
make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash
|
||||
|
||||
example:
|
||||
```
|
||||
$ make handwired/dactyl_manuform/4x5:default
|
||||
```
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
If everything worked correctly you will see a file:
|
||||
## Bootloader
|
||||
|
||||
```
|
||||
dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex
|
||||
```
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md.
|
||||
|
||||
|
||||
## Keymaps
|
||||
|
||||
### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/)
|
||||
|
||||
#### Default
|
||||
Simple QWERTY layout with 3 Layers.
|
||||
#### Dvorak
|
||||
|
||||
### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/)
|
||||
|
||||
#### Default
|
||||
Just a copy of the Impstyle keymap. Feel free to adjust it.
|
||||
|
||||
#### Impstyle
|
||||
A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master.
|
||||
|
||||
### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/)
|
||||
#### Default
|
||||
Keymap of Loligagger from geekhack.
|
||||
|
||||
### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/)
|
||||
|
||||
#### Default
|
||||
Simple QWERTY layout with 3 Layers.
|
||||
|
||||
## Required Hardware
|
||||
|
||||
Apart from diodes and key switches for the keyboard matrix in each half, you
|
||||
will need:
|
||||
|
||||
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each.
|
||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable
|
||||
|
||||
Alternatively, you can use any sort of cable and socket that has at least 3
|
||||
wires. If you want to use I2C to communicate between halves, you will need a
|
||||
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors
|
||||
|
||||
## Optional Hardware
|
||||
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`.
|
||||
|
||||
## Wiring
|
||||
|
||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e.
|
||||
PD0 on the ATmega32u4) between the two Pro Micros.
|
||||
|
||||
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro
|
||||
and modify the `matrix.c` accordingly.
|
||||
|
||||
The wiring for serial:
|
||||
|
||||
|
||||
|
||||
The wiring for i2c:
|
||||
|
||||
|
||||
|
||||
The pull-up resistors may be placed on either half. It is also possible
|
||||
to use 4 resistors and have the pull-ups in both halves, but this is
|
||||
unnecessary in simple use cases.
|
||||
|
||||
You can change your configuration between serial and i2c by modifying your `config.h` file.
|
||||
|
||||
## Notes on Software Configuration
|
||||
|
||||
the keymaps in here are for the 4x5 layout of the keyboard only.
|
||||
|
||||
## Flashing
|
||||
|
||||
To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing)
|
||||
|
||||
|
||||
## Choosing which board to plug the USB cable into (choosing Master)
|
||||
|
||||
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
|
||||
|
||||
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable.
|
||||
|
||||
The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side.
|
||||
|
||||
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
|
||||
|
||||
### Setting the left hand as master
|
||||
|
||||
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
|
||||
|
||||
### Setting the right hand as master
|
||||
|
||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
||||
```
|
||||
#define MASTER_RIGHT
|
||||
```
|
||||
|
||||
### Setting EE_hands to use either hands as master
|
||||
|
||||
If you define `EE_HANDS` in your `config.h`, you will need to set the
|
||||
EEPROM for the left and right halves.
|
||||
|
||||
The EEPROM is used to store whether the
|
||||
half is left handed or right handed. This makes it so that the same firmware
|
||||
file will run on both hands instead of having to flash left and right handed
|
||||
versions of the firmware to each half. To flash the EEPROM file for the left
|
||||
half run:
|
||||
```
|
||||
make handwired/dactyl_promicro:default:dfu-split-left
|
||||
make handwired/dactyl_promicro:default:dfu-split-right
|
||||
```
|
||||
|
||||
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
||||
|
||||
Note that you need to program both halves, but you have the option of using
|
||||
different keymaps for each half. You could program the left half with a QWERTY
|
||||
layout and the right half with a Colemak layout using bootmagic's default layout option.
|
||||
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
|
||||
right half is connected.
|
||||
|
||||
|
||||
Notes on Using Pro Micro 3.3V
|
||||
-----------------------------
|
||||
|
||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
||||
the frequency on the 3.3V board.
|
||||
|
||||
Also, if the slave board is producing weird characters in certain columns,
|
||||
update the following line in `matrix.c` to the following:
|
||||
|
||||
```
|
||||
// wait_us(30); // without this wait read unstable value.
|
||||
wait_us(300); // without this wait read unstable value.
|
||||
```
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user