mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-25 10:44:59 +06:00
Add flow control by firmware to serial_uart
This commit is contained in:
parent
50bcaa66c4
commit
3e7875455e
@ -8,6 +8,7 @@ Roving RN-42
|
||||
|
||||
TODO
|
||||
----
|
||||
- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
|
||||
- Factroy reset doesn't work; need to test again. 10K pull-up is too high?
|
||||
- Lipo voltage ADC sensing
|
||||
- Lipo charger configuration: fast charge time: USB charger spec?
|
||||
|
@ -57,20 +57,23 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
#define RTSEN 0
|
||||
#define CTSEN 1
|
||||
|
||||
#define SERIAL_UART_BAUD 115200
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
|
||||
#define SERIAL_UART_RXD_VECT USART1_RX_vect
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
#define SERIAL_UART_BAUD 115200
|
||||
#define SERIAL_UART_DATA UDR1
|
||||
#define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
|
||||
#define SERIAL_UART_RXD_VECT USART1_RX_vect
|
||||
#define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
|
||||
#define SERIAL_UART_INIT() do { \
|
||||
UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
|
||||
UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
|
||||
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
|
||||
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
|
||||
UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
|
||||
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS */ \
|
||||
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS(no flow control by hardware) */ \
|
||||
DDRD |= (1<<5); PORTD &= ~(1<<5); /* RTS for flow control by firmware */ \
|
||||
sei(); \
|
||||
} while(0)
|
||||
#define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
|
||||
#define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
|
||||
#else
|
||||
#error "USART configuration is needed."
|
||||
#endif
|
||||
|
@ -56,9 +56,7 @@ void rn42_task(void)
|
||||
// Config mode: print output from RN-42
|
||||
while ((c = serial_recv2()) != -1) {
|
||||
// without flow control it'll fail to receive data when flooded
|
||||
rn42_cts_hi();
|
||||
xprintf("%c", c);
|
||||
rn42_cts_lo();
|
||||
}
|
||||
} else {
|
||||
// Raw mode: interpret output report of LED state
|
||||
|
@ -41,6 +41,22 @@ POSSIBILITY OF SUCH DAMAGE.
|
||||
#include "serial.h"
|
||||
|
||||
|
||||
#if defined(SERIAL_UART_RTS_LO) && defined(SERIAL_UART_RTS_HI)
|
||||
// Buffer state
|
||||
// Empty: RBUF_SPACE == RBUF_SIZE(head==tail)
|
||||
// Last 1 space: RBUF_SPACE == 2
|
||||
// Full: RBUF_SPACE == 1(last cell of rbuf be never used.)
|
||||
#define RBUF_SPACE() (rbuf_head < rbuf_tail ? (rbuf_tail - rbuf_head) : (RBUF_SIZE - rbuf_head + rbuf_tail))
|
||||
// allow to send
|
||||
#define rbuf_check_rts_lo() do { if (RBUF_SPACE() > 2) SERIAL_UART_RTS_LO(); } while (0)
|
||||
// prohibit to send
|
||||
#define rbuf_check_rts_hi() do { if (RBUF_SPACE() <= 2) SERIAL_UART_RTS_HI(); } while (0)
|
||||
#else
|
||||
#define rbuf_check_rts_lo()
|
||||
#define rbuf_check_rts_hi()
|
||||
#endif
|
||||
|
||||
|
||||
void serial_init(void)
|
||||
{
|
||||
SERIAL_UART_INIT();
|
||||
@ -61,6 +77,7 @@ uint8_t serial_recv(void)
|
||||
|
||||
data = rbuf[rbuf_tail];
|
||||
rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
|
||||
rbuf_check_rts_lo();
|
||||
return data;
|
||||
}
|
||||
|
||||
@ -73,6 +90,7 @@ int16_t serial_recv2(void)
|
||||
|
||||
data = rbuf[rbuf_tail];
|
||||
rbuf_tail = (rbuf_tail + 1) % RBUF_SIZE;
|
||||
rbuf_check_rts_lo();
|
||||
return data;
|
||||
}
|
||||
|
||||
@ -90,4 +108,5 @@ ISR(SERIAL_UART_RXD_VECT)
|
||||
rbuf[rbuf_head] = SERIAL_UART_DATA;
|
||||
rbuf_head = next;
|
||||
}
|
||||
rbuf_check_rts_hi();
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user