Merge remote-tracking branch 'origin/master' into develop

keyboards/yoichiro/lunakey_macro/config.h

@@ -0,0 +1,158 @@
+/*
+Copyright 2020 Yoichiro Tanaka
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID    0x5954  // "YT" - Yoichiro Tanaka
+#define PRODUCT_ID   0x0002
+#define DEVICE_VER   0x0001
+#define MANUFACTURER yoichiro
+#define PRODUCT      Lunakey Macro
+
+/* key matrix size */
+#define MATRIX_ROWS 3
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+ */
+#define MATRIX_ROW_PINS { E6, B4, B5 }
+#define MATRIX_COL_PINS { B6, B2, B3, B1 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* Audio support */
+#define AUDIO_PIN C6
+
+#ifdef AUDIO_ENABLE
+  #define STARTUP_SONG SONG(E__NOTE(_C7), E__NOTE(_C6))
+#endif
+
+/* Mouse Keys Combined mode */
+//#define MK_COMBINED
+
+/* Layer Count */
+#define DYNAMIC_KEYMAP_LAYER_COUNT 3
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0  // or D1, D2, D3, E6
+
+//#define BACKLIGHT_PIN B7
+//#define BACKLIGHT_LEVELS 3
+//#define BACKLIGHT_BREATHING
+
+#define RGB_DI_PIN D3
+#ifdef RGB_DI_PIN
+  #define RGBLED_NUM 5
+  #define RGBLIGHT_HUE_STEP 8
+  #define RGBLIGHT_SAT_STEP 8
+  #define RGBLIGHT_VAL_STEP 8
+  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+//  #define RGBLIGHT_LAYERS
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_SNAKE
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_RGB_TEST
+#define RGBLIGHT_EFFECT_ALTERNATING
+#define RGBLIGHT_EFFECT_TWINKLE
+/*== customize breathing effect ==*/
+/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//#    define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+/*==== use exp() and sin() ====*/
+//#    define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//#    define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+//#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+//#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+//#define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+
+/* disable these deprecated features by default */
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+/* Bootmagic Lite key configuration */
+//#define BOOTMAGIC_LITE_ROW 0
+//#define BOOTMAGIC_LITE_COLUMN 0

keyboards/yoichiro/lunakey_macro/info.json

@@ -0,0 +1,68 @@
+{
+    "keyboard_name": "Lunakey Macro",
+    "url": "",
+    "maintainer": "Yoichiro Tanaka",
+    "width": 4.5,
+    "height": 4,
+    "layouts": {
+        "LAYOUT": {
+            "layout": [
+                {
+                    "label": "0,2",
+                    "x": 2.5,
+                    "y": 0
+                },
+                {
+                    "label": "0,1",
+                    "x": 1.5,
+                    "y": 0.175
+                },
+                {
+                    "label": "0,0",
+                    "x": 0.5,
+                    "y": 0.5
+                },
+                {
+                    "label": "0,3",
+                    "x": 3.5,
+                    "y": 0.5
+                },
+                {
+                    "label": "1,2",
+                    "x": 2.5,
+                    "y": 1
+                },
+                {
+                    "label": "1,1",
+                    "x": 1.5,
+                    "y": 1.175
+                },
+                {
+                    "label": "1,0",
+                    "x": 0.5,
+                    "y": 1.5
+                },
+                {
+                    "label": "1,3",
+                    "x": 3.5,
+                    "y": 1.5
+                },
+                {
+                    "label": "2,1",
+                    "x": 1,
+                    "y": 2.75
+                },
+                {
+                    "label": "2,0",
+                    "x": 0,
+                    "y": 3
+                },
+                {
+                    "label": "2,2",
+                    "x": 2,
+                    "y": 3
+                }
+            ]
+        }
+    }
+}

keyboards/yoichiro/lunakey_macro/keymaps/default/keymap.c

@@ -0,0 +1,41 @@
+/* Copyright 2020 Yoichiro Tanaka
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _NUMBERS,
+    _CURSOR,
+    _ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_NUMBERS] = LAYOUT(
+        KC_1,         KC_2,       KC_3,        KC_4,
+        KC_5,         KC_6,       KC_7,        KC_8,
+        KC_9,         KC_0,       DF(_CURSOR)
+    ),
+    [_CURSOR] = LAYOUT(
+        KC_PGUP,      KC_HOME,    KC_UP,       KC_END,
+        KC_PGDN,      KC_LEFT,    KC_DOWN,     KC_RGHT,
+        KC_ENT,       KC_BSPC,    DF(_ADJUST)
+    ),
+    [_ADJUST] = LAYOUT(
+        KC_NO,        KC_NO,      KC_NO,       KC_NO,
+        KC_NO,        KC_NO,      KC_NO,       KC_NO,
+        RESET,        KC_NO,      DF(_NUMBERS)
+    )
+};

keyboards/yoichiro/lunakey_macro/keymaps/default/readme.md

@@ -0,0 +1 @@
+# The default keymap for Lunakey Macro

keyboards/yoichiro/lunakey_macro/keymaps/via/keymap.c

@@ -0,0 +1,56 @@
+/* Copyright 2020 Yoichiro Tanaka
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines names for use in layer keycodes and the keymap
+enum layer_names {
+    _NUMBERS,
+    _CURSOR,
+    _ADJUST
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [_NUMBERS] = LAYOUT(
+        KC_1,         KC_2,       KC_3,        KC_4,
+        KC_5,         KC_6,       KC_7,        KC_8,
+        KC_9,         KC_0,       DF(_CURSOR)
+    ),
+    [_CURSOR] = LAYOUT(
+        KC_PGUP,      KC_HOME,    KC_UP,       KC_END,
+        KC_PGDN,      KC_LEFT,    KC_DOWN,     KC_RGHT,
+        KC_ENT,       KC_BSPC,    DF(_ADJUST)
+    ),
+    [_ADJUST] = LAYOUT(
+        RGB_TOG,      RGB_MOD,    RGB_VAI,     RGB_VAD,
+        AU_TOG,       CK_TOGG,    MU_TOG,      MU_MOD,
+        RESET,        KC_NO,      DF(_NUMBERS)
+    )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    float next_song[][2] = SONG(E__NOTE(_A6));
+    float back_song[][2] = SONG(H__NOTE(_D2));
+    switch (keycode) {
+        case DF(_NUMBERS):
+        case DF(_CURSOR):
+            PLAY_SONG(next_song);
+            break;
+        case DF(_ADJUST):
+            PLAY_SONG(back_song);
+            break;
+    }
+    return true;
+}

keyboards/yoichiro/lunakey_macro/keymaps/via/readme.md

@@ -0,0 +1 @@
+# The keymap supporing VIA for Lunakey Macro

keyboards/yoichiro/lunakey_macro/keymaps/via/rules.mk

@@ -0,0 +1,4 @@
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+LTO_ENABLE = yes
+VIA_ENABLE = yes

keyboards/yoichiro/lunakey_macro/lunakey_macro.c

@@ -0,0 +1,17 @@
+/* Copyright 2020 Yoichiro Tanaka
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "lunakey_macro.h"

keyboards/yoichiro/lunakey_macro/lunakey_macro.h

@@ -0,0 +1,37 @@
+/* Copyright 2020 Yoichiro Tanaka
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "quantum.h"
+
+/* This is a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT( \
+    k00, k01, k02, k03, \
+    k10, k11, k12, k13, \
+    k20, k21, k22 \
+) { \
+    { k00, k01, k02, k03   }, \
+    { k10, k11, k12, k13   }, \
+    { k20, k21, k22, KC_NO }  \
+}

keyboards/yoichiro/lunakey_macro/readme.md

@@ -0,0 +1,21 @@
+# Lunakey Macro
+
+![Lunakey Macro](https://i.imgur.com/BirFxgYh.jpeg)
+
+This is a macro keyboard which has 11 keys.
+
+* Keyboard Maintainer: [Yoichiro Tanaka](https://github.com/yoichiro)
+* Hardware Supported: Lunakey Macro PCB, Pro Micro MCU.
+* Hardware Availability: Published yet.
+
+Make example for this keyboard (after setting up your build environment):
+
+    make lunakey_macro:default
+
+Flashing example for this keyboard:
+
+    make lunakey_macro:default:flash
+
+To enter the bootloader mode, you push the black tact switch next to the ProMicro.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/yoichiro/lunakey_macro/rules.mk

@@ -0,0 +1,22 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+BOOTLOADER = atmel-dfu
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = no        # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no            # USB Nkey Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+BLUETOOTH_ENABLE = no       # Enable Bluetooth
+AUDIO_ENABLE = no           # Audio output