Added propper support for Lets split vitamins (#2559)

* Added support for the upcomming Lets_split vitamins included

* Updated readme

* Corrected header of readme

* Enabled RGB

* Broke everything

* broke some more shit

* Revert "broke some more shit"

This reverts commit 6ad68e6269cc0d04c16564ce9598dfd3db1e23c1.

* Revert "Broke everything"

This reverts commit feeee4e40db15a726f2292b6a9406ef45c1e54a7.

* Fixed USB detection, and RGB on slave

* started modifying readme, to use msys2

* Added support for the upcomming Lets_split vitamins included

* Updated readme

* Corrected header of readme

* Enabled RGB

* Broke everything

* broke some more shit

* Revert "broke some more shit"

This reverts commit 6ad68e6269cc0d04c16564ce9598dfd3db1e23c1.

* Revert "Broke everything"

This reverts commit feeee4e40db15a726f2292b6a9406ef45c1e54a7.

* Fixed USB detection, and RGB on slave

* started modifying readme, to use msys2

* Updated readme to reflect use of msys2 Added avrdude to msys path

* added avrdude option to msys installer

* Removed extra installation of avrdude

* Renamed to vitamins_included and implemented drashnas changes

* Fixed include guard

* Fixed some includes, and added avrdude target to docs.

* Fixed default keyboard

.vscode/settings.json

@@ -11,6 +11,7 @@
         "*.h": "c",
         "*.c": "c",
         "*.cpp": "cpp",
-        "*.hpp": "cpp"
+        "*.hpp": "cpp",
+        "xstddef": "c"
     }
 }

docs/getting_started_make_guide.md

@@ -14,7 +14,7 @@ The full syntax of the `make` command is `<keyboard_folder>:<keymap>:<target>`,
 The `<target>` means the following
 * If no target is given, then it's the same as `all` below
 * `all` compiles as many keyboard/revision/keymap combinations as specified. For example, `make planck/rev4:default` will generate a single .hex, while `make planck/rev4:all` will generate a hex for every keymap available to the planck.
-* `dfu`, `teensy` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
+* `dfu`, `teensy`, `avrdude` or `dfu-util`, compile and upload the firmware to the keyboard. If the compilation fails, then nothing will be uploaded. The programmer to use depends on the keyboard. For most keyboards it's `dfu`, but for ChibiOS keyboards you should use `dfu-util`, and `teensy` for standard Teensys. To find out which command you should use for your keyboard, check the keyboard specific readme.
  * **Note**: some operating systems need root access for these commands to work, so in that case you need to run for example `sudo make planck/rev4:default:dfu`.
 * `clean`, cleans the build output folders to make sure that everything is built from scratch. Run this before normal compilation if you have some unexplainable problems.
 

keyboards/vitamins_included/config.h

@@ -0,0 +1,24 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+#endif

keyboards/vitamins_included/i2c.c

@@ -0,0 +1,163 @@
+#include <util/twi.h>
+#include <avr/io.h>
+#include <stdlib.h>
+#include <avr/interrupt.h>
+#include <util/twi.h>
+#include <stdbool.h>
+#include "i2c.h"
+
+#ifdef USE_I2C
+
+// Limits the amount of we wait for any one i2c transaction.
+// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
+// 9 bits, a single transaction will take around 90μs to complete.
+//
+// (F_CPU/SCL_CLOCK)  =>  # of μC cycles to transfer a bit
+// poll loop takes at least 8 clock cycles to execute
+#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
+
+#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
+
+volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+static volatile uint8_t slave_buffer_pos;
+static volatile bool slave_has_register_set = false;
+
+// Wait for an i2c operation to finish
+inline static
+void i2c_delay(void) {
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+
+  // easier way, but will wait slightly longer
+  // _delay_us(100);
+}
+
+// Setup twi to run at 100kHz
+void i2c_master_init(void) {
+  // no prescaler
+  TWSR = 0;
+  // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
+  // Check datasheets for more info.
+  TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
+}
+
+// Start a transaction with the given i2c slave address. The direction of the
+// transfer is set with I2C_READ and I2C_WRITE.
+// returns: 0 => success
+//          1 => error
+uint8_t i2c_master_start(uint8_t address) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
+
+  i2c_delay();
+
+  // check that we started successfully
+  if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
+    return 1;
+
+  TWDR = address;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
+    return 1; // slave did not acknowledge
+  else
+    return 0; // success
+}
+
+
+// Finish the i2c transaction.
+void i2c_master_stop(void) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
+
+  uint16_t lim = 0;
+  while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
+    lim++;
+}
+
+// Write one byte to the i2c slave.
+// returns 0 => slave ACK
+//         1 => slave NACK
+uint8_t i2c_master_write(uint8_t data) {
+  TWDR = data;
+  TWCR = (1<<TWINT) | (1<<TWEN);
+
+  i2c_delay();
+
+  // check if the slave acknowledged us
+  return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
+}
+
+// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
+// if ack=0 the acknowledge bit is not set.
+// returns: byte read from i2c device
+uint8_t i2c_master_read(int ack) {
+  TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
+
+  i2c_delay();
+  return TWDR;
+}
+
+void i2c_reset_state(void) {
+  TWCR = 0;
+}
+
+void i2c_slave_init(uint8_t address) {
+  TWAR = address << 0; // slave i2c address
+  // TWEN  - twi enable
+  // TWEA  - enable address acknowledgement
+  // TWINT - twi interrupt flag
+  // TWIE  - enable the twi interrupt
+  TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
+}
+
+ISR(TWI_vect);
+
+ISR(TWI_vect) {
+  uint8_t ack = 1;
+  switch(TW_STATUS) {
+    case TW_SR_SLA_ACK:
+      // this device has been addressed as a slave receiver
+      slave_has_register_set = false;
+      break;
+
+    case TW_SR_DATA_ACK:
+      // this device has received data as a slave receiver
+      // The first byte that we receive in this transaction sets the location
+      // of the read/write location of the slaves memory that it exposes over
+      // i2c.  After that, bytes will be written at slave_buffer_pos, incrementing
+      // slave_buffer_pos after each write.
+      if(!slave_has_register_set) {
+        slave_buffer_pos = TWDR;
+        // don't acknowledge the master if this memory loctaion is out of bounds
+        if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
+          ack = 0;
+          slave_buffer_pos = 0;
+        }
+        slave_has_register_set = true;
+      } else {
+        i2c_slave_buffer[slave_buffer_pos] = TWDR;
+        BUFFER_POS_INC();
+      }
+      break;
+
+    case TW_ST_SLA_ACK:
+    case TW_ST_DATA_ACK:
+      // master has addressed this device as a slave transmitter and is
+      // requesting data.
+      TWDR = i2c_slave_buffer[slave_buffer_pos];
+      BUFFER_POS_INC();
+      break;
+
+    case TW_BUS_ERROR: // something went wrong, reset twi state
+      TWCR = 0;
+    default:
+      break;
+  }
+  // Reset everything, so we are ready for the next TWI interrupt
+  TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
+  contacted_by_master = true;
+}
+#endif

keyboards/vitamins_included/i2c.h

@@ -0,0 +1,50 @@
+#ifndef I2C_H
+#define I2C_H
+
+#include <stdint.h>
+#include "split_util.h"
+
+#ifndef F_CPU
+#define F_CPU 16000000UL
+#endif
+
+#define I2C_READ 1
+#define I2C_WRITE 0
+
+#define I2C_ACK 1
+#define I2C_NACK 0
+
+#define SLAVE_BUFFER_SIZE 0x10
+
+// i2c SCL clock frequency
+#define SCL_CLOCK  400000L
+
+extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
+
+void i2c_master_init(void);
+uint8_t i2c_master_start(uint8_t address);
+void i2c_master_stop(void);
+uint8_t i2c_master_write(uint8_t data);
+uint8_t i2c_master_read(int);
+void i2c_reset_state(void);
+void i2c_slave_init(uint8_t address);
+
+
+static inline unsigned char i2c_start_read(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_READ);
+}
+
+static inline unsigned char i2c_start_write(unsigned char addr) {
+  return i2c_master_start((addr << 1) | I2C_WRITE);
+}
+
+// from SSD1306 scrips
+extern unsigned char i2c_rep_start(unsigned char addr);
+extern void i2c_start_wait(unsigned char addr);
+extern unsigned char i2c_readAck(void);
+extern unsigned char i2c_readNak(void);
+extern unsigned char i2c_read(unsigned char ack);
+
+#define i2c_read(ack)  (ack) ? i2c_readAck() : i2c_readNak();
+
+#endif

keyboards/vitamins_included/keymaps/default/config.h

@@ -0,0 +1,44 @@
+/*
+This is the c configuration file for the keymap
+
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "../../config.h"
+
+/* Use I2C or Serial, not both */
+
+#define USE_SERIAL
+// #define USE_I2C
+
+/* Select hand configuration */
+
+//#define MASTER_LEFT
+// #define MASTER_RIGHT
+#define EE_HANDS
+
+#ifdef AUDIO_ENABLE
+  #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                SONG(DVORAK_SOUND), \
+                                SONG(COLEMAK_SOUND) \
+                              }
+#endif
+
+#endif

keyboards/vitamins_included/keymaps/default/keymap.c

@@ -0,0 +1,199 @@
+#include QMK_KEYBOARD_H
+#include "action_layer.h"
+#include "eeconfig.h"
+
+extern keymap_config_t keymap_config;
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QWERTY 0
+#define _COLEMAK 1
+#define _DVORAK 2
+#define _LOWER 3
+#define _RAISE 4
+#define _ADJUST 16
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  COLEMAK,
+  DVORAK,
+  LOWER,
+  RAISE,
+  ADJUST
+};
+
+// Fillers to make layering more clear
+#define _______ KC_TRNS
+#define XXXXXXX KC_NO
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * | Ctrl | GUI  |  Alt |Adjust|Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = LAYOUT_ortho_4x12( \
+  KC_ESC,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_TAB,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  KC_LCTRL,KC_LGUI,  KC_LALT, ADJUST,  LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Colemak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  '   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_COLEMAK] = LAYOUT_ortho_4x12( \
+  KC_TAB,  KC_Q,    KC_W,    KC_F,    KC_P,    KC_G,    KC_J,    KC_L,    KC_U,    KC_Y,    KC_SCLN, KC_BSPC, \
+  KC_ESC,  KC_A,    KC_R,    KC_S,    KC_T,    KC_D,    KC_H,    KC_N,    KC_E,    KC_I,    KC_O,    KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_K,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Dvorak
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   ;  |   Q  |   J  |   K  |   X  |   B  |   M  |   W  |   V  |   Z  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |Adjust| Ctrl | Alt  | GUI  |Lower |Space |Space |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_DVORAK] = LAYOUT_ortho_4x12( \
+  KC_TAB,  KC_QUOT, KC_COMM, KC_DOT,  KC_P,    KC_Y,    KC_F,    KC_G,    KC_C,    KC_R,    KC_L,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_O,    KC_E,    KC_U,    KC_I,    KC_D,    KC_H,    KC_T,    KC_N,    KC_S,    KC_SLSH, \
+  KC_LSFT, KC_SCLN, KC_Q,    KC_J,    KC_K,    KC_X,    KC_B,    KC_M,    KC_W,    KC_V,    KC_Z,    KC_ENT , \
+  ADJUST,  KC_LCTL, KC_LALT, KC_LGUI, LOWER,   KC_SPC,  KC_SPC,  RAISE,   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |      |   \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |RESET |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO ~ |ISO | |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = LAYOUT_ortho_4x12( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  RESET,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Del  |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |ISO # |ISO / |      |      |RESET |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = LAYOUT_ortho_4x12( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_DEL, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_NUHS, KC_NUBS, _______, _______, RESET, \
+  _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Adjust (Lower + Raise)
+ * ,-----------------------------------------------------------------------------------.
+ * |      | Reset|      |      |      |      |      |      |      |      |      |  Del |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * |      |      |      |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|      |      |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |      |      |      |      |      |      |      |      |      |      |      |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      |      |      |      |RGB_MOD|
+ * `-----------------------------------------------------------------------------------'
+ */
+[_ADJUST] =  LAYOUT_ortho_4x12( \
+  _______, RESET,   _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \
+  _______, _______, _______, AU_ON,   AU_OFF,  AG_NORM, AG_SWAP, QWERTY,  COLEMAK, DVORAK,  _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD \
+)
+
+
+};
+
+void persistent_default_layer_set(uint16_t default_layer) {
+  eeconfig_update_default_layer(default_layer);
+  default_layer_set(default_layer);
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case QWERTY:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_QWERTY);
+      }
+      return false;
+      break;
+    case COLEMAK:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_COLEMAK);
+      }
+      return false;
+      break;
+    case DVORAK:
+      if (record->event.pressed) {
+        persistent_default_layer_set(1UL<<_DVORAK);
+      }
+      return false;
+      break;
+    case LOWER:
+      if (record->event.pressed) {
+        layer_on(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_LOWER);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case RAISE:
+      if (record->event.pressed) {
+        layer_on(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      } else {
+        layer_off(_RAISE);
+        update_tri_layer(_LOWER, _RAISE, _ADJUST);
+      }
+      return false;
+      break;
+    case ADJUST:
+      if (record->event.pressed) {
+        layer_on(_ADJUST);
+      } else {
+        layer_off(_ADJUST);
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/vitamins_included/keymaps/default/rules.mk

@@ -0,0 +1,3 @@
+ifndef QUANTUM_DIR
+	include ../../../../Makefile
+endif

keyboards/vitamins_included/matrix.c

@@ -0,0 +1,510 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * scan matrix
+ */
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "split_util.h"
+#include "pro_micro.h"
+#include "config.h"
+#include "timer.h"
+#include <print.h>
+
+#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
+    #include "rgblight.h"
+#endif
+
+
+#ifdef USE_I2C
+#  include "i2c.h"
+#else // USE_SERIAL
+#  include "serial.h"
+#endif
+
+#ifndef DEBOUNCING_DELAY
+#   define DEBOUNCING_DELAY 5
+#endif
+
+#if (DEBOUNCING_DELAY > 0)
+    static uint16_t debouncing_time;
+    static bool debouncing = false;
+#endif
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#else
+#    error "Currently only supports 8 COLS"
+#endif
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#define ERROR_DISCONNECT_COUNT 5
+
+#define ROWS_PER_HAND (MATRIX_ROWS/2)
+
+static uint8_t error_count = 0;
+
+static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+#if (DIODE_DIRECTION == COL2ROW)
+    static void init_cols(void);
+    static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
+    static void unselect_rows(void);
+    static void select_row(uint8_t row);
+    static void unselect_row(uint8_t row);
+#elif (DIODE_DIRECTION == ROW2COL)
+    static void init_rows(void);
+    static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
+    static void unselect_cols(void);
+    static void unselect_col(uint8_t col);
+    static void select_col(uint8_t col);
+#endif
+
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+bool has_usb(void) {
+  return UDADDR & _BV(ADDEN); // This will return true of a USB connection has been established
+}
+
+void matrix_init(void)
+{
+#ifdef DISABLE_JTAG
+  // JTAG disable for PORT F. write JTD bit twice within four cycles.
+  MCUCR |= (1<<JTD);
+  MCUCR |= (1<<JTD);
+#endif
+
+    // initialize row and col
+#if (DIODE_DIRECTION == COL2ROW)
+    unselect_rows();
+    init_cols();
+#elif (DIODE_DIRECTION == ROW2COL)
+    unselect_cols();
+    init_rows();
+#endif
+
+  TX_RX_LED_INIT;
+
+  // initialize matrix state: all keys off
+  for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  #ifdef RGBLIGHT_ENABLE
+    rgblight_init();
+  #endif
+
+  timer_init();
+  #ifdef USE_I2C
+    i2c_slave_init(SLAVE_I2C_ADDRESS);
+  #else
+    serial_slave_init();
+  #endif
+
+  sei();
+
+  matrix_init_quantum();
+  while(!has_usb() || contacted_by_master){
+    matrix_slave_scan();
+  }
+
+  // Set up as master
+  #ifdef USE_I2C
+    i2c_reset_state();
+    i2c_master_init();
+  #else
+    serial_master_init();
+  #endif
+}
+
+uint8_t _matrix_scan(void)
+{
+    int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
+#if (DIODE_DIRECTION == COL2ROW)
+    // Set row, read cols
+    for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
+
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+                PORTD ^= (1 << 2);
+            }
+
+#       else
+            read_cols_on_row(matrix+offset, current_row);
+#       endif
+
+    }
+
+#elif (DIODE_DIRECTION == ROW2COL)
+    // Set col, read rows
+    for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+#       if (DEBOUNCING_DELAY > 0)
+            bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
+            if (matrix_changed) {
+                debouncing = true;
+                debouncing_time = timer_read();
+            }
+#       else
+             read_rows_on_col(matrix+offset, current_col);
+#       endif
+
+    }
+#endif
+
+#   if (DEBOUNCING_DELAY > 0)
+        if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
+            for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
+                matrix[i+offset] = matrix_debouncing[i+offset];
+            }
+            debouncing = false;
+        }
+#   endif
+
+    return 1;
+}
+
+#ifdef USE_I2C
+
+// Get rows from other half over i2c
+int i2c_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
+    if (err) goto i2c_error;
+
+    // start of matrix stored at 0x00
+    err = i2c_master_write(0x00);
+    if (err) goto i2c_error;
+
+    // Start read
+    err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
+    if (err) goto i2c_error;
+
+    if (!err) {
+        int i;
+        for (i = 0; i < ROWS_PER_HAND-1; ++i) {
+            matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
+        }
+        matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
+        i2c_master_stop();
+    } else {
+i2c_error: // the cable is disconnceted, or something else went wrong
+        i2c_reset_state();
+        return err;
+    }
+
+    return 0;
+}
+
+#else // USE_SERIAL
+
+int serial_transaction(void) {
+    int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+
+    if (serial_update_buffers()) {
+        return 1;
+    }
+
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        matrix[slaveOffset+i] = serial_slave_buffer[i];
+    }
+    return 0;
+}
+#endif
+
+uint8_t matrix_scan(void)
+{
+    uint8_t ret = _matrix_scan();
+
+#ifdef USE_I2C
+    if( i2c_transaction() ) {
+#else // USE_SERIAL
+    if( serial_transaction() ) {
+#endif
+        // turn on the indicator led when halves are disconnected
+        TXLED1;
+
+        error_count++;
+
+        if (error_count > ERROR_DISCONNECT_COUNT) {
+            // reset other half if disconnected
+            int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
+            for (int i = 0; i < ROWS_PER_HAND; ++i) {
+                matrix[slaveOffset+i] = 0;
+            }
+        }
+    } else {
+        // turn off the indicator led on no error
+        TXLED0;
+        error_count = 0;
+    }
+    matrix_scan_quantum();
+    return ret;
+}
+
+void matrix_slave_scan(void) {
+  #if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE)
+    rgblight_task();
+  #endif
+  _matrix_scan();
+
+  int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
+
+#ifdef USE_I2C
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        i2c_slave_buffer[i] = matrix[offset+i];
+    }
+#else // USE_SERIAL
+    for (int i = 0; i < ROWS_PER_HAND; ++i) {
+        serial_slave_buffer[i] = matrix[offset+i];
+    }
+#endif
+}
+
+bool matrix_is_modified(void)
+{
+    if (debouncing) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    return matrix[row];
+}
+
+void matrix_print(void)
+{
+    print("\nr/c 0123456789ABCDEF\n");
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        pbin_reverse16(matrix_get_row(row));
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += bitpop16(matrix[i]);
+    }
+    return count;
+}
+
+#if (DIODE_DIRECTION == COL2ROW)
+
+static void init_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin = col_pins[col_index];
+        uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+static void select_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_row(uint8_t row)
+{
+    uint8_t pin = row_pins[row];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void init_rows(void)
+{
+    for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
+        uint8_t pin = row_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+static void select_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) |=  _BV(pin & 0xF); // OUT
+    _SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
+}
+
+static void unselect_col(uint8_t col)
+{
+    uint8_t pin = col_pins[col];
+    _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+    _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        uint8_t pin = col_pins[x];
+        _SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
+        _SFR_IO8((pin >> 4) + 2) |=  _BV(pin & 0xF); // HI
+    }
+}
+
+#endif

keyboards/vitamins_included/readme.md

@@ -0,0 +1,126 @@
+Let's Split Vitamins Included
+======
+![Let's Split Vitamins included, assmebled in 3D printed case](https://i.imgur.com/btl0vNQ.jpg)
+
+This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/
+
+
+**Hardware files for the Let's Split vitamins included are stored [here](http://github.com/duckle29/let-s-Split-v2/tree/onboardMCU)**
+
+## First Time Setup
+
+Clone the `qmk_firmware` repo and navigate to its top level directory. [Once your build environment is setup](https://docs.qmk.fm/getting_started_build_tools.html), you'll be able to generate the default .hex using the [build/compile instructions](https://docs.qmk.fm/build-compile-instructions) in the docs
+
+If everything worked correctly you will see a file:
+
+```bash
+lets_split_vitamins_rev1_YOUR_KEYMAP_NAME.hex
+```
+
+If you want, you can flash the hex file to the keyboard right after compilation, by adding `:avrdude` to the end of the make command like so:
+
+```bash
+make lets_split_vitamins/rev1:default:avrdude
+```
+
+This will both compile the hex, and flash the connected half.
+
+For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
+
+
+Features
+--------
+
+For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
+
+Some features supported by the firmware:
+
+* Either half can connect to the computer via USB, or both halves can be used
+  independently.
+* You only need 3 wires to connect the two halves. One for VCC, one for GND and one
+  for serial communication.
+* Optional support for I2C connection between the two halves if for some
+  reason you require a faster connection between the two halves. Note this
+  requires an extra wire between halves and pull-up resistors on the data lines.
+  This is supported on the vitamins included.  
+  The extra data line can also be used for ws2812 type LEDs.  
+  If neither I2C nor RGB underglow is used, a TRS cable can be used instead of the 4wire TRRS cables.
+
+Required Hardware
+-----------------
+|Amount| Description |
+|--|--|
+| 1 | PCB kit from novelkeys |
+| 48 | MX compatible switches |
+| 48 | 1U keycaps
+| 2 | Half cases. A 3D model for the left half is available [here](https://cad.onshape.com/documents/c6e5ae250d1e24fe46c9ef6c/w/d69f7049c0921df3d2b241f9/e/ecc2b176ab52a6d77bc55051). Mirror that to get a right-half case. Plate cases will be designed in the future.
+| 1 | USB-mini-B cable of your choice |
+| 1 | TRS / TRRS cable
+
+Optional Hardware
+-----------------
+
+A speaker can be hooked-up to the footprint on the PCBs. It is already enabled in the default firmware from github.
+
+A strip of WS2812 LEDs can be hooked up too, a guide will be written on how to do that once I get mine in the mail.  
+The PCB and connectors can safely handle 1A of current, but the USB standard is only rated at 500mA. Keep that in mind when picking the amount of LEDs.
+
+
+## Using I2C
+
+On  the left half PCB, there's two pads labled ***I2C Pullup*** if you want to use I2C, you need to bridge those two solder jumpers with a soldering iron.
+
+You can change your configuration between serial and i2c by modifying your `config.h` file.
+
+Notes on Software Configuration
+-------------------------------
+
+Configuring the firmware is similar to any other QMK project. One thing
+to note is that `MATRIX_ROWS` in `config.h` is the total number of rows between
+the two halves, so because the let's split vitamins included has 4 rows in each half, it's
+`MATRIX_ROWS=8`.
+
+Also, the current implementation assumes a maximum of 8 columns, but it would
+not be very difficult to adapt it to support more if required.
+
+
+## Entering bootloader  
+If the keyboard isn't new, and has been flashed before, you need to enter bootloader.
+To enter bootloader, either use the assigned keys on the keymap, or if none have been put in the keymap, quickly short the reset to gnd twice. (Bottom pins of programming header, see image) ![Reset pins](https://i.imgur.com/LCXlv9W.png)
+
+If using the default keymap, there's a reset key-combination on each half:  
+***Lower (SW23) and left-shift (SW13)*** on the left half, or  
+***Raise(SW44) and Enter(SW42)***  on the right half  
+It is recommended to add such reset keys to any custom keymaps. It shouldn't be necesarry to have one on each half, but the default layout has that.
+
+The board exits bootloader mode after 8 seconds, if you haven't started flashing.
+
+## EEPROM
+
+If this is the first time you're flashing the boards, you have to flash EEPROM
+
+0. If your keyboard is plugged in, unplug it
+1. Open a terminal, and navigate to the qmk_firmware folder
+2. Run `ls /dev | grep tty` Note down which ports you see
+2. Plug the keyboard in, if it's new, it should enter bootloader, if it's not new, see **Entering bootloader** on how to enter bootloader mode
+4. Right after entering bootloader, run `ls /dev | grep tty` again. There should be a new tty, this is the bootloader TTY, note it down. If nothing shows see **Entering bootloader** on how to enter bootloader mode
+6. For the left hand side, run  `avrdude -c avr109 -p m32u4 -P /dev/ttyS1 -U eeprom:w:"./keyboards/lets_split_vitamins/eeprom-lefthand.eep":a`
+Replace ***/dev/ttyS1*** with the port you noted down earlier. If you're on windows using msys2, replace ***/dev/ttyS1*** with COM2, note that the number is one higher than the tty number.  
+Do the same For the right hand, but change the file to ***eeprom-righthand.eep***
+
+Your EEPROM should be flashed :)
+
+In the future, you shouldn't need to flash EEPROM (it will in fact wear the eeprom memory, so don't)
+
+## Flashing
+If you haven't flashed EEPROM before, do that first.  
+
+To flash keymaps onto the keyboard, use:
+```bash
+make lets_split_vitamins/rev1:[KEYMAP]:avrdude
+```
+from the qmk_firmware folder. Default being the default keymap.
+
+You can plug either half into USB and it will work. you can also remove the TRS/TRRS cable, and plug both halves in. (which is why the default layout has reset on both halves)
+
+Enjoy your keyboard! :D

keyboards/vitamins_included/rev1/config.h

@@ -0,0 +1,92 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+Copyright 2015 Jack Humbert
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef REV1_CONFIG_H
+#define REV1_CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xBEE5
+#define PRODUCT_ID      0xF33D
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    Duckle29
+#define PRODUCT         Lets Split sockets vitamins included
+#define DESCRIPTION     A split keyboard for the cheapish makers
+
+/* key matrix size */
+// Rows are doubled-up
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 6
+
+// wiring of each half
+#define MATRIX_ROW_PINS { F5, F6, C7, F7 }
+#define MATRIX_COL_PINS { F1, F4, E2, B6, D7, D6}
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+// #define BACKLIGHT_LEVELS 3
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* ws2812 RGB LED */
+#define RGB_DI_PIN F0
+#define RGBLIGHT_TIMER
+#define RGBLED_NUM 16    // Number of LEDs
+#define ws2812_PORTREG  PORTF
+#define ws2812_DDRREG   DDRF
+#define RGBLIGHT_ANIMATIONS
+
+/* Audio settings */
+#ifdef AUDIO_ENABLE
+    #define C6_AUDIO // Define this to enable the buzzer
+#endif
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+// #define NO_DEBUG
+
+/* disable print */
+// #define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+
+#endif

keyboards/vitamins_included/rev1/rev1.c

@@ -0,0 +1,13 @@
+#include "rev1.h"
+
+
+#ifdef SSD1306OLED
+void led_set_kb(uint8_t usb_led) {
+    // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+    led_set_user(usb_led);
+}
+#endif
+
+void matrix_init_kb(void) {
+	matrix_init_user();
+};

keyboards/vitamins_included/rev1/rev1.h

@@ -0,0 +1,40 @@
+#ifndef REV1_H
+#define REV1_H
+#define DISABLE_JTAG // The keyboard uses PF4, PF5 and PF7, which are used by JTAG.
+#define EE_HANDS // This isn't optional for the vitamins included
+
+#include QMK_KEYBOARD_H
+
+//void promicro_bootloader_jmp(bool program);
+#include "quantum.h"
+
+
+#ifdef USE_I2C
+#include <stddef.h>
+#ifdef __AVR__
+	#include <avr/io.h>
+	#include <avr/interrupt.h>
+#endif
+#endif
+
+//void promicro_bootloader_jmp(bool program);
+
+#define KEYMAP( \
+	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+	) \
+	{ \
+		{ L00, L01, L02, L03, L04, L05 }, \
+		{ L10, L11, L12, L13, L14, L15 }, \
+		{ L20, L21, L22, L23, L24, L25 }, \
+		{ L30, L31, L32, L33, L34, L35 }, \
+		{ R00, R01, R02, R03, R04, R05 }, \
+		{ R10, R11, R12, R13, R14, R15 }, \
+		{ R20, R21, R22, R23, R24, R25 }, \
+		{ R30, R31, R32, R33, R34, R35 } \
+  }
+
+#define LAYOUT_ortho_4x12 KEYMAP
+#endif

keyboards/vitamins_included/rev1/rules.mk

@@ -0,0 +1,5 @@
+BACKLIGHT_ENABLE = no
+AUDIO_ENABLE = yes
+RGBLIGHT_ENABLE = yes
+DEBUG_ENABLE = no
+CONSOLE_ENABLE = no

keyboards/vitamins_included/rules.mk

@@ -0,0 +1,75 @@
+SRC += matrix.c \
+	   i2c.c \
+	   split_util.c \
+	   serial.c \
+	   ssd1306.c
+
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   change to "no" to disable the options, or define them in the Makefile in
+#   the appropriate keymap folder that will get included automatically
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes       # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes       # Audio control and System control(+450)
+CONSOLE_ENABLE = no         # Console for debug(+400)
+COMMAND_ENABLE = yes        # Commands for debug and configuration
+NKRO_ENABLE = no            # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = no      # Enable keyboard backlight functionality
+MIDI_ENABLE = no            # MIDI controls
+AUDIO_ENABLE = no           # Audio output on port C6
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+RGBLIGHT_ENABLE = no       # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+USE_I2C = no
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
+
+CUSTOM_MATRIX = yes
+
+LAYOUTS = ortho_4x12
+
+DEFAULT_FOLDER = vitamins_included/rev1

keyboards/vitamins_included/serial.c

@@ -0,0 +1,229 @@
+/*
+ * WARNING: be careful changing this code, it is very timing dependent
+ */
+
+#ifndef F_CPU
+#define F_CPU 16000000
+#endif
+
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <stdbool.h>
+#include "serial.h"
+
+#ifndef USE_I2C
+
+// Serial pulse period in microseconds. Its probably a bad idea to lower this
+// value.
+#define SERIAL_DELAY 24
+
+uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
+uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
+
+#define SLAVE_DATA_CORRUPT (1<<0)
+volatile uint8_t status = 0;
+
+inline static
+void serial_delay(void) {
+  _delay_us(SERIAL_DELAY);
+}
+
+inline static
+void serial_output(void) {
+  SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
+}
+
+// make the serial pin an input with pull-up resistor
+inline static
+void serial_input(void) {
+  SERIAL_PIN_DDR  &= ~SERIAL_PIN_MASK;
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+inline static
+uint8_t serial_read_pin(void) {
+  return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
+}
+
+inline static
+void serial_low(void) {
+  SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
+}
+
+inline static
+void serial_high(void) {
+  SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
+}
+
+void serial_master_init(void) {
+  serial_output();
+  serial_high();
+}
+
+void serial_slave_init(void) {
+  serial_input();
+
+  // Enable INT0
+  EIMSK |= _BV(INT0);
+  // Trigger on falling edge of INT0
+  EICRA &= ~(_BV(ISC00) | _BV(ISC01));
+}
+
+// Used by the master to synchronize timing with the slave.
+static
+void sync_recv(void) {
+  serial_input();
+  // This shouldn't hang if the slave disconnects because the
+  // serial line will float to high if the slave does disconnect.
+  while (!serial_read_pin());
+  serial_delay();
+}
+
+// Used by the slave to send a synchronization signal to the master.
+static
+void sync_send(void) {
+  serial_output();
+
+  serial_low();
+  serial_delay();
+
+  serial_high();
+}
+
+// Reads a byte from the serial line
+static
+uint8_t serial_read_byte(void) {
+  uint8_t byte = 0;
+  serial_input();
+  for ( uint8_t i = 0; i < 8; ++i) {
+    byte = (byte << 1) | serial_read_pin();
+    serial_delay();
+    _delay_us(1);
+  }
+
+  return byte;
+}
+
+// Sends a byte with MSB ordering
+static
+void serial_write_byte(uint8_t data) {
+  uint8_t b = 8;
+  serial_output();
+  while( b-- ) {
+    if(data & (1 << b)) {
+      serial_high();
+    } else {
+      serial_low();
+    }
+    serial_delay();
+  }
+}
+
+// interrupt handle to be used by the slave device
+ISR(SERIAL_PIN_INTERRUPT) {
+  sync_send();
+
+  uint8_t checksum = 0;
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_slave_buffer[i]);
+    sync_send();
+    checksum += serial_slave_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_send();
+
+  // wait for the sync to finish sending
+  serial_delay();
+
+  // read the middle of pulses
+  _delay_us(SERIAL_DELAY/2);
+
+  uint8_t checksum_computed = 0;
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_master_buffer[i] = serial_read_byte();
+    sync_send();
+    checksum_computed += serial_master_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_send();
+
+  serial_input(); // end transaction
+
+  if ( checksum_computed != checksum_received ) {
+    status |= SLAVE_DATA_CORRUPT;
+  } else {
+    status &= ~SLAVE_DATA_CORRUPT;
+  }
+  contacted_by_master = true;
+}
+
+inline
+bool serial_slave_DATA_CORRUPT(void) {
+  return status & SLAVE_DATA_CORRUPT;
+}
+
+// Copies the serial_slave_buffer to the master and sends the
+// serial_master_buffer to the slave.
+//
+// Returns:
+// 0 => no error
+// 1 => slave did not respond
+int serial_update_buffers(void) {
+  // this code is very time dependent, so we need to disable interrupts
+  cli();
+
+  // signal to the slave that we want to start a transaction
+  serial_output();
+  serial_low();
+  _delay_us(1);
+
+  // wait for the slaves response
+  serial_input();
+  serial_high();
+  _delay_us(SERIAL_DELAY);
+
+  // check if the slave is present
+  if (serial_read_pin()) {
+    // slave failed to pull the line low, assume not present
+    sei();
+    return 1;
+  }
+
+  // if the slave is present syncronize with it
+  sync_recv();
+
+  uint8_t checksum_computed = 0;
+  // receive data from the slave
+  for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
+    serial_slave_buffer[i] = serial_read_byte();
+    sync_recv();
+    checksum_computed += serial_slave_buffer[i];
+  }
+  uint8_t checksum_received = serial_read_byte();
+  sync_recv();
+
+  if (checksum_computed != checksum_received) {
+    sei();
+    return 1;
+  }
+
+  uint8_t checksum = 0;
+  // send data to the slave
+  for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
+    serial_write_byte(serial_master_buffer[i]);
+    sync_recv();
+    checksum += serial_master_buffer[i];
+  }
+  serial_write_byte(checksum);
+  sync_recv();
+
+  // always, release the line when not in use
+  serial_output();
+  serial_high();
+
+  sei();
+  return 0;
+}
+
+#endif

keyboards/vitamins_included/serial.h

@@ -0,0 +1,27 @@
+#ifndef MY_SERIAL_H
+#define MY_SERIAL_H
+
+#include "config.h"
+#include <stdbool.h>
+#include "split_util.h"
+
+/* TODO:  some defines for interrupt setup */
+#define SERIAL_PIN_DDR DDRD
+#define SERIAL_PIN_PORT PORTD
+#define SERIAL_PIN_INPUT PIND
+#define SERIAL_PIN_MASK _BV(PD0)
+#define SERIAL_PIN_INTERRUPT INT0_vect
+
+#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
+#define SERIAL_MASTER_BUFFER_LENGTH 1
+
+// Buffers for master - slave communication
+extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
+extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
+
+void serial_master_init(void);
+void serial_slave_init(void);
+int serial_update_buffers(void);
+bool serial_slave_data_corrupt(void);
+
+#endif

keyboards/vitamins_included/split_util.c

@@ -0,0 +1,20 @@
+#include <avr/io.h>
+#include <avr/wdt.h>
+#include <avr/power.h>
+#include <avr/interrupt.h>
+#include <util/delay.h>
+#include <avr/eeprom.h>
+#include "split_util.h"
+#include "matrix.h"
+#include "keyboard.h"
+#include "config.h"
+#include "timer.h"
+#include "debug.h"
+
+volatile bool isLeftHand = true;
+volatile bool contacted_by_master = false;
+
+// this code runs before the usb and keyboard is initialized
+void matrix_setup(void) {
+  isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
+}

keyboards/vitamins_included/split_util.h

@@ -0,0 +1,18 @@
+#ifndef SPLIT_KEYBOARD_UTIL_H
+#define SPLIT_KEYBOARD_UTIL_H
+
+#include <stdbool.h>
+#include "eeconfig.h"
+
+#define SLAVE_I2C_ADDRESS           0x32
+
+extern volatile bool isLeftHand;
+extern volatile bool contacted_by_master;
+
+bool has_usb(void);
+
+// slave version of matix scan, defined in matrix.c
+void matrix_slave_scan(void);
+
+
+#endif

keyboards/vitamins_included/vitamins_included.c

@@ -0,0 +1,16 @@
+#include QMK_KEYBOARD_H
+
+#ifdef ONEHAND_ENABLE
+__attribute__ ((weak))
+const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
+
+  {{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}},
+  {{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}},
+  {{0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6}},
+  {{0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7}},
+  {{0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0}},
+  {{0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1}},
+  {{0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2}},
+  {{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}},
+};
+#endif

keyboards/vitamins_included/vitamins_included.h

@@ -0,0 +1,25 @@
+#ifndef VITAMINS_INCLUDED_H
+#define VITAMINS_INCLUDED_H
+
+#include "quantum.h"
+
+#include "rev1.h"
+
+
+// Used to create a keymap using only KC_ prefixed keys
+#define KC_KEYMAP( \
+    L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
+    L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
+    L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
+    L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
+    ) \
+    KEYMAP( \
+        KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
+        KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
+        KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
+        KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
+    )
+
+#define KC_LAYOUT_ortho_4x12 KC_KEYMAP
+
+#endif

util/activate_msys2.sh

@@ -8,6 +8,7 @@ function export_variables {
     export PATH=$PATH:$util_dir/flip/bin
     export PATH=$PATH:$util_dir/avr8-gnu-toolchain/bin
     export PATH=$PATH:$util_dir/gcc-arm-none-eabi/bin
+    export PATH=$PATH:/mingw64/bin
 }
 
 export_variables

util/msys2_install.sh

@@ -67,7 +67,7 @@ if [ ! -d "$armtools" ]; then
     while true; do
         echo
         echo "The ARM toolchain is not installed."
-        echo "This is needed for building ARM based keboards."
+        echo "This is needed for building ARM based keyboards."
         read -p "Do you want to install it? (Y/N) " res
         case $res in
             [Yy]* ) install_arm; break;;