mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 18:06:34 +06:00
32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
|
# Adding RGB Underglow to the KC60
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
The KC60 has breakout pins to which one may wire a strip of WS2812-compatible LEDs.
|
||
|
|
|
||
|
|
By default, the source is set up for 16 LEDs on the F5 breakout pin. See [included image](https://i.imgur.com/TcKL2Sn.jpg) for wiring reference. If you attach a different number of LEDs, configure your source for the correct number of LEDs by adding a `config.h` file alongside your `keymap.c` file, with the following contents:
|
||
|
|
|
||
|
|
```c
|
||
|
|
#pragma once
|
||
|
|
|
||
|
|
#undef RGBLED_NUM
|
||
|
|
#define RGBLED_NUM <number of leds>
|
||
|
|
```
|
||
|
|
|
||
|
|
To enable RGB Underglow, simply add a `rules.mk` file containing `RGBLIGHT_ENABLE = yes` alongside your `keymap.c` file, and compile as normal:
|
||
|
|
|
||
|
|
```shell
|
||
|
|
make kc60:<keymap>
|
||
|
|
```
|
||
|
|
|
||
|
|
The [ws2812 keymap](keymaps/ws2812/) may be copied and used as a starting point.
|
||
|
|
|
||
|
|
RGB Underglow is a fairly large feature, and your firmware may be too large to be flashed with it enabled. Adding `CONSOLE_ENABLE = no` or `COMMAND_ENABLE = no` to your `rules.mk` file will reduce the size of the firmware greatly, and if you don't use either feature, is a very low impact change.
|
||
|
|
|
||
|
|
|
||
|
|
## Reference Images
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|