keychron_qmk_firmware/keyboards/skyloong/gk61/pro_48/readme.md

# GK61 PRO 48

![GK61 PRO](https://i.imgur.com/DTetyVLh.jpg)

## The PCB features:
* QMK & VIA compatibility
* RGB Matrix backlight
* The space bar position switch can be interchanged with encoder module.


The following is the QMK Firmware for the Destop 60% keylayout -  designed in Dongguan Jizhi Electronic Technology Co., Ltd

* Keyboard Maintainer: [NaturalZh](https://github.com/NaturalZh)
* Hardware Supported: DestopPCB for Skyloong keylayout 60%, STM32F103C8T6
* Hardware Availability: http://www.skyloong.com.cn  https://skyloong.vip

Make example for this keyboard (after setting up your build environment):

    make skyloong/gk61/pro_48:default

Flashing example for this keyboard:

    make skyloong/gk61/pro_48:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
[Keyboard] Skyloong GK61 Pro 48 (#21654) * Create GK61 PRO_48 Keyboard. * update pro.c and config.h to save power when USB suspend. * Update keyboards/skyloong/gk61/pro_48/info.json OK,thank you. * update info.json * update layer indicator * Update RGB animations---delete rainbow_beacon and rainbo_pinwheels. * Cancel force_nkro * Add caps lock indicator in rgb matrix. * Update keyboards/skyloong/gk61/pro_48/pro_48.c OK, thank you for your suggestion. * Enable I2C DMA; Modified pro_48.c * Update keyboards/skyloong/gk61/pro_48/info.json OK, thank you for your suggestion. * Update keyboards/skyloong/gk61/pro_48/info.json OK, thanks. * enable encoder map in default keymap. * define g_suspend_state 2023-10-13 10:59:10 +06:00			`# GK61 PRO 48`

			`![GK61 PRO](https://i.imgur.com/DTetyVLh.jpg)`

			`## The PCB features:`
			`* QMK & VIA compatibility`
			`* RGB Matrix backlight`
			`* The space bar position switch can be interchanged with encoder module.`


			`The following is the QMK Firmware for the Destop 60% keylayout - designed in Dongguan Jizhi Electronic Technology Co., Ltd`

			`* Keyboard Maintainer: [NaturalZh](https://github.com/NaturalZh)`
			`* Hardware Supported: DestopPCB for Skyloong keylayout 60%, STM32F103C8T6`
			`* Hardware Availability: http://www.skyloong.com.cn https://skyloong.vip`

			`Make example for this keyboard (after setting up your build environment):`

			`make skyloong/gk61/pro_48:default`

			`Flashing example for this keyboard:`

			`make skyloong/gk61/pro_48:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available