keychron_qmk_firmware/keyboards/draytronics/daisy/config.h

/*Copyright 2021 Blake Drayson / Draytronics

Contact info@draytronics.co.uk

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

#define VENDOR_ID       0x4454 //DT for DrayTronics
#define PRODUCT_ID      0x4441 //DA for Daisy
#define DEVICE_VER      0x0100 //Version 1
#define MANUFACTURER    Draytronics
#define PRODUCT         DAISY

/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 4

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
 */

#define MATRIX_ROW_PINS { B0, C0, C1}
#define MATRIX_COL_PINS { C2, C3, C4, C5 }
#define UNUSED_PINS

#define ENCODERS_PAD_A { B1, D0 }
#define ENCODERS_PAD_B { B2, D1 }
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
#define TAP_CODE_DELAY 10
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
 */
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO
/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT

//Underglow
#define RGB_DI_PIN D4 // Underglow led pin
#ifdef RGB_DI_PIN
  #define RGBLED_NUM 4
  #define RGBLIGHT_HUE_STEP 8
  #define RGBLIGHT_SAT_STEP 8
  #define RGBLIGHT_VAL_STEP 8
  #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
  #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
  /*== all animations enable ==*/
  #define RGBLIGHT_ANIMATIONS
#endif