keychron_qmk_firmware/keyboards/db/db63/rules.mk

# MCU name
MCU = atmega32a

# Bootloader selection
BOOTLOADER = bootloadhid

# build options
BOOTMAGIC_ENABLE = no       # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = i2c
[Keyboard] Add support for db63 hotswap rbg (#7771) * correct the matrix pin for db63 * first correct layout * adding RGB support for db63 * adding backlighting keycode * enable back extension * update readme for the bootloader * correct the capslock pin * update correct info.json and layout following suggestion * editing contact * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> 2020-01-05 07:04:49 +06:00			`# MCU name`
			`MCU = atmega32a`

			`# Bootloader selection`
Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2021-09-10 13:17:54 +06:00			`BOOTLOADER = bootloadhid`
[Keyboard] Add support for db63 hotswap rbg (#7771) * correct the matrix pin for db63 * first correct layout * adding RGB support for db63 * adding backlighting keycode * enable back extension * update readme for the bootloader * correct the capslock pin * update correct info.json and layout following suggestion * editing contact * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> 2020-01-05 07:04:49 +06:00
			`# build options`
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta 2021-08-07 12:59:56 +06:00			`BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite`
[Keyboard] Add support for db63 hotswap rbg (#7771) * correct the matrix pin for db63 * first correct layout * adding RGB support for db63 * adding backlighting keycode * enable back extension * update readme for the bootloader * correct the capslock pin * update correct info.json and layout following suggestion * editing contact * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/db/db63/README.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> 2020-01-05 07:04:49 +06:00			`MOUSEKEY_ENABLE = yes`
			`EXTRAKEY_ENABLE = yes`
			`CONSOLE_ENABLE = no`
			`COMMAND_ENABLE = yes`
			`BACKLIGHT_ENABLE = yes`
			`RGBLIGHT_ENABLE = yes`
			`WS2812_DRIVER = i2c`