keychron_qmk_firmware/keyboards/kudox_full/readme.md

# The Kudox Full keyboard

![Kudox logo](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox.png)

![Kudox Full image2](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-full-image2.jpg) | ![Kudox Full image1](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-full-image1.jpg)
:----:|:-----:
 front | angle

- Keyboard Maintainer: [Kumao Kobo](https://github.com/kumaokobo)
- Hardware Supported: Kudox Full PCB rev1.0 w/ Pro Micro
- Assembly guide: [Kudox Full/README](https://github.com/kumaokobo/kudox-keyboard/blob/master/kudox-full/README.md)

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

## Building Firmware

Make example for this keyboard (after setting up your build environment):

    make kudox_full/rev1:default


Flashing example for this keyboard:

    make kudox_full/rev1:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] Add Kudox Full (#15256) * Add Kudox Full keyboard * Add keyboards/kudox_full SPDX identifier * Modify rule.mk of keyboards/kudox_full * Remove html code from README of keyboards/kudox_full * Modify readme of keyboards/kudox_full * rev1.c includes rev1.h - kudox-full/rev1 * Move to <keyboard>.c oled_task_user and eeconfig_init_user * Move post_config.h MOUSEKEY_* * Change BOOTMAGIC_ENABLE no kudox_full * Modify the obsoleted codes * Modify eeconfig_init_kb from eeconfig_init_user * Set none as default, but values * Add about the bootloader on kudox_full/readme * Modify the comments in keyboards/kudox_full/rules.mk 2022-01-09 03:23:34 +06:00			`# The Kudox Full keyboard`

			`![Kudox logo](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox.png)`

			`![Kudox Full image2](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-full-image2.jpg) \| ![Kudox Full image1](https://raw.githubusercontent.com/kumaokobo/kudox-keyboard/master/img/kudox-full-image1.jpg)`
			`:----:\|:-----:`
			`front \| angle`

			`- Keyboard Maintainer: [Kumao Kobo](https://github.com/kumaokobo)`
			`- Hardware Supported: Kudox Full PCB rev1.0 w/ Pro Micro`
			`- Assembly guide: [Kudox Full/README](https://github.com/kumaokobo/kudox-keyboard/blob/master/kudox-full/README.md)`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 16:34:17 +06:00			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available
[Keyboard] Add Kudox Full (#15256) * Add Kudox Full keyboard * Add keyboards/kudox_full SPDX identifier * Modify rule.mk of keyboards/kudox_full * Remove html code from README of keyboards/kudox_full * Modify readme of keyboards/kudox_full * rev1.c includes rev1.h - kudox-full/rev1 * Move to <keyboard>.c oled_task_user and eeconfig_init_user * Move post_config.h MOUSEKEY_* * Change BOOTMAGIC_ENABLE no kudox_full * Modify the obsoleted codes * Modify eeconfig_init_kb from eeconfig_init_user * Set none as default, but values * Add about the bootloader on kudox_full/readme * Modify the comments in keyboards/kudox_full/rules.mk 2022-01-09 03:23:34 +06:00
			`## Building Firmware`

			`Make example for this keyboard (after setting up your build environment):`

			`make kudox_full/rev1:default`


			`Flashing example for this keyboard:`

			`make kudox_full/rev1:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`