2017-07-09 09:03:33 +06:00
<asf xmlversion= "1.0" >
<project caption= "Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id= "lufa.bootloaders.printer.avr8.128_4" force-caption= "true" workspace-name= "lufa_printer_128kb_4kb_" >
<require idref= "lufa.bootloaders.printer" />
<require idref= "lufa.boards.dummy.avr8" />
<generator value= "as5_8" />
<device-support value= "at90usb1287" />
<config name= "lufa.drivers.board.name" value= "none" />
<config name= "config.compiler.optimization.level" value= "size" />
<build type= "define" name= "F_CPU" value= "16000000UL" />
<build type= "define" name= "F_USB" value= "16000000UL" />
<build type= "define" name= "BOOT_START_ADDR" value= "0x1F000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.text=0x1F000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_trampolines=0x1FFA0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Trampolines" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_jumptable=0x1FFE0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_JumpTable" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_signatures=0x1FFF8" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Signatures" />
</project>
<project caption= "Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id= "lufa.bootloaders.printer.avr8.64_4" force-caption= "true" workspace-name= "lufa_printer_64kb_4kb_" >
<require idref= "lufa.bootloaders.printer" />
<require idref= "lufa.boards.dummy.avr8" />
<generator value= "as5_8" />
<device-support value= "at90usb647" />
<config name= "lufa.drivers.board.name" value= "none" />
<config name= "config.compiler.optimization.level" value= "size" />
<build type= "define" name= "F_CPU" value= "16000000UL" />
<build type= "define" name= "F_USB" value= "16000000UL" />
<build type= "define" name= "BOOT_START_ADDR" value= "0xF000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.text=0xF000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_trampolines=0xFFA0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Trampolines" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_jumptable=0xFFE0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_JumpTable" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_signatures=0xFFF8" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Signatures" />
</project>
<project caption= "Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id= "lufa.bootloaders.printer.avr8.32_4" force-caption= "true" workspace-name= "lufa_printer_32kb_4kb_" >
<require idref= "lufa.bootloaders.printer" />
<require idref= "lufa.boards.dummy.avr8" />
<generator value= "as5_8" />
<device-support value= "atmega32u4" />
<config name= "lufa.drivers.board.name" value= "none" />
<config name= "config.compiler.optimization.level" value= "size" />
<build type= "define" name= "F_CPU" value= "16000000UL" />
<build type= "define" name= "F_USB" value= "16000000UL" />
<build type= "define" name= "BOOT_START_ADDR" value= "0x7000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.text=0x7000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_trampolines=0x7FA0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Trampolines" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_jumptable=0x7FE0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_JumpTable" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_signatures=0x7FF8" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Signatures" />
</project>
<project caption= "Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id= "lufa.bootloaders.printer.avr8.16_4" force-caption= "true" workspace-name= "lufa_printer_16kb_4kb_" >
<require idref= "lufa.bootloaders.printer" />
<require idref= "lufa.boards.dummy.avr8" />
<generator value= "as5_8" />
<device-support value= "atmega16u2" />
<config name= "lufa.drivers.board.name" value= "none" />
<config name= "config.compiler.optimization.level" value= "size" />
<build type= "define" name= "F_CPU" value= "16000000UL" />
<build type= "define" name= "F_USB" value= "16000000UL" />
<build type= "define" name= "BOOT_START_ADDR" value= "0x3000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.text=0x3000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_trampolines=0x3FA0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Trampolines" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_jumptable=0x3FE0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_JumpTable" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_signatures=0x3FF8" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Signatures" />
</project>
<project caption= "Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id= "lufa.bootloaders.printer.avr8.8_4" force-caption= "true" workspace-name= "lufa_printer_8kb_4kb_" >
<require idref= "lufa.bootloaders.printer" />
<require idref= "lufa.boards.dummy.avr8" />
<generator value= "as5_8" />
<device-support value= "atmega8u2" />
<config name= "lufa.drivers.board.name" value= "none" />
<config name= "config.compiler.optimization.level" value= "size" />
<build type= "define" name= "F_CPU" value= "16000000UL" />
<build type= "define" name= "F_USB" value= "16000000UL" />
<build type= "define" name= "BOOT_START_ADDR" value= "0x1000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.text=0x1000" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_trampolines=0x1FA0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Trampolines" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_jumptable=0x1FE0" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_JumpTable" />
<build type= "linker-config" subtype= "flags" value= "--section-start=.apitable_signatures=0x1FF8" />
<build type= "linker-config" subtype= "flags" value= "--undefined=BootloaderAPI_Signatures" />
</project>
<module type= "application" id= "lufa.bootloaders.printer" caption= "Printer Bootloader" >
<info type= "description" value= "summary" >
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
</info>
<info type= "gui-flag" value= "move-to-root" />
<info type= "keyword" value= "Technology" >
<keyword value= "Bootloaders" />
<keyword value= "USB Device" />
</info>
<device-support-alias value= "lufa_avr8" />
<device-support-alias value= "lufa_xmega" />
<device-support-alias value= "lufa_uc3" />
<build type= "include-path" value= "." />
<build type= "c-source" value= "BootloaderPrinter.c" />
<build type= "header-file" value= "BootloaderPrinter.h" />
<build type= "c-source" value= "Descriptors.c" />
<build type= "header-file" value= "Descriptors.h" />
<build type= "c-source" value= "BootloaderAPI.c" />
<build type= "header-file" value= "BootloaderAPI.h" />
<build type= "asm-source" value= "BootloaderAPITable.S" />
<build type= "module-config" subtype= "path" value= "Config" />
<build type= "header-file" value= "Config/LUFAConfig.h" />
<build type= "distribute" subtype= "user-file" value= "doxyfile" />
<build type= "distribute" subtype= "user-file" value= "BootloaderPrinter.txt" />
<require idref= "lufa.common" />
<require idref= "lufa.platform" />
<require idref= "lufa.drivers.usb" />
<require idref= "lufa.drivers.board" />
<require idref= "lufa.drivers.board.leds" />
</module>
</asf>
