mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-25 01:47:10 +06:00
28 lines
1.9 KiB
Markdown
28 lines
1.9 KiB
Markdown
|
# Iron180 V2 PCBs QMK firmware folder
|
||
|
|
|
||
|
|
## Introduction
|
||
|
|
|
||
|
|
This is the QMK Firmware repository for the Iron180 PCB, a keyboard designed by [Smith and Rune](https://smithrune.com/) and PCB designed by [Gondolindrim](http://github.com/Gondolindrim).
|
||
|
|
|
||
|
|
The Iron180 PCB PCB had two versions. The first version used an STM32F072 microcontroller, and was available only in solderable version; it also supports ALPS switches, in-switch single-color LEDs and a multi-layout design for default or 7U bottom row, ISO layout, split backspace and right shift.
|
||
|
|
|
||
|
|
The second version used an STM32F401 microcontroller and was available in hotswap and solderable version. The solderable version removes in-switch LED support and ALPS support, but keeps all layout compatibilities of the first version. The hotswap incarnation removes ISO layout support.
|
||
|
|
|
||
|
|
As of November 2020, the only way to obtain an Iron180 was through the [Group Buy](https://geekhack.org/index.php?topic=109513) which is already over and all spots were filled. There was a sale for the V2 PCBs in october, 2023.
|
||
|
|
|
||
|
|
## How to compile
|
||
|
|
|
||
|
|
After setting up your build environment, you can compile the Iron180 default keymap by using:
|
||
|
|
|
||
|
|
make smithrune/iron180v2/<version>/default
|
||
|
|
|
||
|
|
Where `<version>` can be `v2s` or `v2h`.
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## How to enter into bootloader DFU
|
||
|
|
Enter the bootloader DFU mode in 3 ways:
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (Escape in the default keymap) and plug in the keyboard
|
||
|
|
* **Physical reset button**: press and hold the reset button on the back of the PCB for five seconds
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` (Escape key on layer 1 in the default keymap)
|