keychron_qmk_firmware/keyboards/fjlabs/avalon/readme.md

# Avalon PCB by FJLaboratories

The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.

* Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)
* Hardware Supported: Avalon

Make example for this keyboard (after setting up your build environment):

    make fjlabs/avalon:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter the bootloader in 3 ways:

* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
[Keyboard] Add Trailblazer Avalon (#17568) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> 2022-08-30 00:22:54 +06:00			`# Avalon PCB by FJLaboratories`

			`The following is the QMK Firmware for the Avalon PCB, both Solder and Hotswap, for Trailblazer Keyboards.`
FJLabs Avalon Layout Additions and Touch-Up (#20620) * add matrix_diagram.md * info.json: correct key sequence Fixes an off-by-one error between Right Split Backspace and Enter. * refactor and unify keymaps Edit the `default` and `via` keymaps for consistency layer-to-layer, to each other, and to the `info.json` layout data. * info.json: apply friendly formatting * add LAYOUT_ansi_blocker_split_bs * add LAYOUT_ansi_blocker * add LAYOUT_ansi_blocker_tsangan_split_bs * add LAYOUT_ansi_blocker_tsangan * add LAYOUT_iso_blocker_split_bs * add LAYOUT_iso_blocker * add LAYOUT_iso_blocker_tsangan_split_bs * add LAYOUT_iso_blocker_tsangan * add layout reference keymaps * info.json: remove extra line breaks * edit maintainer value 2023-04-30 11:52:30 +06:00
			`* Keyboard Maintainer: [mrnoisytiger (FJLaboratories)](https://github.com/mrnoisytiger)`
[Keyboard] Add Trailblazer Avalon (#17568) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> 2022-08-30 00:22:54 +06:00			`* Hardware Supported: Avalon`

			`Make example for this keyboard (after setting up your build environment):`

			`make fjlabs/avalon:default`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter the bootloader in 3 ways:`

			`* Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard`
			`* Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead`
FJLabs Avalon Layout Additions and Touch-Up (#20620) * add matrix_diagram.md * info.json: correct key sequence Fixes an off-by-one error between Right Split Backspace and Enter. * refactor and unify keymaps Edit the `default` and `via` keymaps for consistency layer-to-layer, to each other, and to the `info.json` layout data. * info.json: apply friendly formatting * add LAYOUT_ansi_blocker_split_bs * add LAYOUT_ansi_blocker * add LAYOUT_ansi_blocker_tsangan_split_bs * add LAYOUT_ansi_blocker_tsangan * add LAYOUT_iso_blocker_split_bs * add LAYOUT_iso_blocker * add LAYOUT_iso_blocker_tsangan_split_bs * add LAYOUT_iso_blocker_tsangan * add layout reference keymaps * info.json: remove extra line breaks * edit maintainer value 2023-04-30 11:52:30 +06:00			* Keycode in layout: Press the key mapped to `QK_BOOT` if it is available