keychron_qmk_firmware/quantum/led_matrix/led_matrix_drivers.c

248 lines
8.3 KiB
C
Raw Normal View History

/* Copyright 2018 James Laird-Wah
* Copyright 2019 Clueboard
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-29 02:02:18 +06:00
#include "led_matrix.h"
/* Each driver needs to define a struct:
*
* const led_matrix_driver_t led_matrix_driver;
*
* All members must be provided. Keyboard custom drivers must define this
* in their own files.
*/
#if defined(LED_MATRIX_IS31FL3731) || defined(LED_MATRIX_IS31FL3733) || defined(IS31FLCOMMON) || defined(LED_MATRIX_CKLED2001)
2019-08-31 00:19:03 +06:00
# include "i2c_master.h"
static void init(void) {
i2c_init();
# if defined(LED_MATRIX_IS31FL3731)
is31fl3731_init(LED_DRIVER_ADDR_1);
# if defined(LED_DRIVER_ADDR_2)
is31fl3731_init(LED_DRIVER_ADDR_2);
# if defined(LED_DRIVER_ADDR_3)
is31fl3731_init(LED_DRIVER_ADDR_3);
# if defined(LED_DRIVER_ADDR_4)
is31fl3731_init(LED_DRIVER_ADDR_4);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
# elif defined(LED_MATRIX_IS31FL3733)
# if !defined(LED_DRIVER_SYNC_1)
# define LED_DRIVER_SYNC_1 0
# endif
is31fl3733_init(LED_DRIVER_ADDR_1, LED_DRIVER_SYNC_1);
# if defined(LED_DRIVER_ADDR_2)
# if !defined(LED_DRIVER_SYNC_2)
# define LED_DRIVER_SYNC_2 0
# endif
is31fl3733_init(LED_DRIVER_ADDR_2, LED_DRIVER_SYNC_2);
# if defined(LED_DRIVER_ADDR_3)
# if !defined(LED_DRIVER_SYNC_3)
# define LED_DRIVER_SYNC_3 0
# endif
is31fl3733_init(LED_DRIVER_ADDR_3, LED_DRIVER_SYNC_3);
# if defined(LED_DRIVER_ADDR_4)
# if !defined(LED_DRIVER_SYNC_4)
# define LED_DRIVER_SYNC_4 0
# endif
is31fl3733_init(LED_DRIVER_ADDR_4, LED_DRIVER_SYNC_4);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
# elif defined(IS31FLCOMMON)
IS31FL_common_init(DRIVER_ADDR_1, ISSI_SSR_1);
# if defined(LED_DRIVER_ADDR_2)
IS31FL_common_init(DRIVER_ADDR_2, ISSI_SSR_2);
# if defined(LED_DRIVER_ADDR_3)
IS31FL_common_init(DRIVER_ADDR_3, ISSI_SSR_3);
# if defined(LED_DRIVER_ADDR_4)
IS31FL_common_init(DRIVER_ADDR_4, ISSI_SSR_4);
# endif
# endif
# endif
# elif defined(LED_MATRIX_CKLED2001)
# if defined(LED_DRIVER_SHUTDOWN_PIN)
setPinOutput(LED_DRIVER_SHUTDOWN_PIN);
writePinHigh(LED_DRIVER_SHUTDOWN_PIN);
# endif
ckled2001_init(DRIVER_ADDR_1);
# if defined(DRIVER_ADDR_2)
ckled2001_init(DRIVER_ADDR_2);
# if defined(DRIVER_ADDR_3)
ckled2001_init(DRIVER_ADDR_3);
# if defined(DRIVER_ADDR_4)
ckled2001_init(DRIVER_ADDR_4);
# endif
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
2019-01-27 11:25:59 +06:00
for (int index = 0; index < LED_MATRIX_LED_COUNT; index++) {
# if defined(LED_MATRIX_IS31FL3731)
is31fl3731_set_led_control_register(index, true);
# elif defined(LED_MATRIX_IS31FL3733)
is31fl3733_set_led_control_register(index, true);
# elif defined(IS31FLCOMMON)
IS31FL_simple_set_scaling_buffer(index, true);
# elif defined(LED_MATRIX_CKLED2001)
ckled2001_set_led_control_register(index, true);
2019-08-31 00:19:03 +06:00
# endif
}
2019-08-31 00:19:03 +06:00
// This actually updates the LED drivers
# if defined(LED_MATRIX_IS31FL3731)
is31fl3731_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
is31fl3731_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
is31fl3731_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
is31fl3731_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
# elif defined(LED_MATRIX_IS31FL3733)
is31fl3733_update_led_control_registers(LED_DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
is31fl3733_update_led_control_registers(LED_DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
is31fl3733_update_led_control_registers(LED_DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
is31fl3733_update_led_control_registers(LED_DRIVER_ADDR_4, 3);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
# elif defined(IS31FLCOMMON)
# ifdef ISSI_MANUAL_SCALING
IS31FL_set_manual_scaling_buffer();
# endif
IS31FL_common_update_scaling_register(DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
IS31FL_common_update_scaling_register(DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
IS31FL_common_update_scaling_register(DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
IS31FL_common_update_scaling_register(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
# elif defined(LED_MATRIX_CKLED2001)
ckled2001_update_led_control_registers(DRIVER_ADDR_1, 0);
# if defined(DRIVER_ADDR_2)
ckled2001_update_led_control_registers(DRIVER_ADDR_2, 1);
# if defined(DRIVER_ADDR_3)
ckled2001_update_led_control_registers(DRIVER_ADDR_3, 2);
# if defined(DRIVER_ADDR_4)
ckled2001_update_led_control_registers(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
}
# if defined(LED_MATRIX_IS31FL3731)
static void flush(void) {
is31fl3731_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
is31fl3731_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
is31fl3731_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
is31fl3731_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
}
const led_matrix_driver_t led_matrix_driver = {
.init = init,
.flush = flush,
.set_value = is31fl3731_set_value,
.set_value_all = is31fl3731_set_value_all,
};
# elif defined(LED_MATRIX_IS31FL3733)
static void flush(void) {
is31fl3733_update_pwm_buffers(LED_DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
is31fl3733_update_pwm_buffers(LED_DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
is31fl3733_update_pwm_buffers(LED_DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
is31fl3733_update_pwm_buffers(LED_DRIVER_ADDR_4, 3);
# endif
# endif
2019-08-31 00:19:03 +06:00
# endif
}
const led_matrix_driver_t led_matrix_driver = {
.init = init,
.flush = flush,
.set_value = is31fl3733_set_value,
.set_value_all = is31fl3733_set_value_all,
};
# elif defined(IS31FLCOMMON)
static void flush(void) {
IS31FL_common_update_pwm_register(DRIVER_ADDR_1, 0);
# if defined(LED_DRIVER_ADDR_2)
IS31FL_common_update_pwm_register(DRIVER_ADDR_2, 1);
# if defined(LED_DRIVER_ADDR_3)
IS31FL_common_update_pwm_register(DRIVER_ADDR_3, 2);
# if defined(LED_DRIVER_ADDR_4)
IS31FL_common_update_pwm_register(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
}
const led_matrix_driver_t led_matrix_driver = {
.init = init,
.flush = flush,
.set_value = IS31FL_simple_set_brightness,
.set_value_all = IS31FL_simple_set_brigntness_all,
};
# elif defined(LED_MATRIX_CKLED2001)
static void flush(void) {
ckled2001_update_pwm_buffers(DRIVER_ADDR_1, 0);
# if defined(DRIVER_ADDR_2)
ckled2001_update_pwm_buffers(DRIVER_ADDR_2, 1);
# if defined(DRIVER_ADDR_3)
ckled2001_update_pwm_buffers(DRIVER_ADDR_3, 2);
# if defined(DRIVER_ADDR_4)
ckled2001_update_pwm_buffers(DRIVER_ADDR_4, 3);
# endif
# endif
# endif
}
const led_matrix_driver_t led_matrix_driver = {
.init = init,
.flush = flush,
.set_value = ckled2001_set_value,
.set_value_all = ckled2001_set_value_all,
};
# endif
#endif