keychron_qmk_firmware/keyboards/chlx/lfn_merro60/readme.md

# lfn.merro60

![lfn.merro60 PCB](https://i.imgur.com/naIgvKy.jpg)

- Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility.
- Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.
- Meant to be manufactured in 2mm thickness.

* Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)
* Hardware Supported: chlx PCB lfn.merro60.x.x.x

Make example for this keyboard (after setting up your build environment):

    make chlx/lfn_merro60:default

Flashing example for this keyboard:

    make chlx/lfn_merro60:default:flash

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

## Bootloader

Enter bootloader mode by any of the following options -
- When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard
- After plugging in, press and release the reset button on the pcb top-side near the spacebar switch locations
- After plugging in, short out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)
[Keyboard] Add chlx lfn merro (#24026) * add previous working files to new branch * update config files. tested via version * update per qmk PR requested changes - 1. rename info.json -> keyboard.json, move config.h -> keyamps/via/config.h, remove rules.mk * update photo link for pcb * remove redundant community keymaps * Update keyboards/chlx/lfn_merro60/keymaps/default/keymap.c correct keycode for iso keys Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> * switch image url to source from imgur instead of github --------- Co-authored-by: chalex <alejandrelee+magbogbro@gmail.com> Co-authored-by: Duncan Sutherland <dunk2k_2000@hotmail.com> 2024-07-04 08:40:24 +06:00			`# lfn.merro60`

			`![lfn.merro60 PCB](https://i.imgur.com/naIgvKy.jpg)`

			`- Standard 60% format keyboard PCB with USB-C and unified daughterboard compatibility.`
			`- Modified cutouts to allow usage of certain tray mount cases into gummy gasket o-ring mount.`
			`- Meant to be manufactured in 2mm thickness.`

			`* Keyboard Maintainer: [Alexander Lee](https://github.com/gaclee3b)`
			`* Hardware Supported: chlx PCB lfn.merro60.x.x.x`

			`Make example for this keyboard (after setting up your build environment):`

			`make chlx/lfn_merro60:default`

			`Flashing example for this keyboard:`

			`make chlx/lfn_merro60:default:flash`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`

			`## Bootloader`

			`Enter bootloader mode by any of the following options -`
			`- When unplugged, holding the top-left key (typically ESC) while plugging in the keyboard`
			`- After plugging in, press and release the reset button on the pcb top-side near the spacebar switch locations`
			`- After plugging in, short out the two reset metal contacts near the 'z' key (accessible through the switch LED slot)`