keychron_qmk_firmware/drivers/painter/st77xx/qp_st77xx_opcodes.h

// Copyright 2021 Paul Cotter (@gr1mr3aver)
// SPDX-License-Identifier: GPL-2.0-or-later

#pragma once

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Quantum Painter ST77XX command opcodes

// System function commands
#define ST77XX_CMD_NOP 0x00          // No operation
#define ST77XX_CMD_RESET 0x01        // Software reset
#define ST77XX_GET_ID_INFO 0x04      // Get ID information
#define ST77XX_GET_STATUS 0x09       // Get status
#define ST77XX_GET_PWR_MODE 0x0A     // Get power mode
#define ST77XX_GET_MADCTL 0x0B       // Get mem access ctl
#define ST77XX_GET_PIX_FMT 0x0C      // Get pixel format
#define ST77XX_GET_IMG_FMT 0x0D      // Get image format
#define ST77XX_GET_SIG_MODE 0x0E     // Get signal mode
#define ST77XX_CMD_SLEEP_ON 0x10     // Enter sleep mode
#define ST77XX_CMD_SLEEP_OFF 0x11    // Exist sleep mode
#define ST77XX_CMD_PARTIAL_ON 0x12   // Enter partial mode
#define ST77XX_CMD_NORMAL_ON 0x13    // Exit partial mode
#define ST77XX_CMD_INVERT_OFF 0x20   // Exit inverted mode
#define ST77XX_CMD_INVERT_ON 0x21    // Enter inverted mode
#define ST77XX_SET_GAMMA 0x26        // Set gamma params
#define ST77XX_CMD_DISPLAY_OFF 0x28  // Disable display
#define ST77XX_CMD_DISPLAY_ON 0x29   // Enable display
#define ST77XX_SET_COL_ADDR 0x2A     // Set column address
#define ST77XX_SET_ROW_ADDR 0x2B     // Set page (row) address
#define ST77XX_SET_MEM 0x2C          // Set memory
#define ST77XX_GET_MEM 0x2E          // Get memory
#define ST77XX_SET_PARTIAL_AREA 0x30 // Set partial area
#define ST77XX_CMD_TEARING_OFF 0x34  // Tearing line disabled
#define ST77XX_CMD_TEARING_ON 0x35   // Tearing line enabled
#define ST77XX_SET_MADCTL 0x36       // Set mem access ctl
#define ST77XX_CMD_IDLE_OFF 0x38     // Exit idle mode
#define ST77XX_CMD_IDLE_ON 0x39      // Enter idle mode
#define ST77XX_SET_PIX_FMT 0x3A      // Set pixel format
#define ST77XX_GET_ID1 0xDA          // Get ID1
#define ST77XX_GET_ID2 0xDB          // Get ID2
#define ST77XX_GET_ID3 0xDC          // Get ID3

////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// MADCTL Flags
#define ST77XX_MADCTL_MY 0b10000000
#define ST77XX_MADCTL_MX 0b01000000
#define ST77XX_MADCTL_MV 0b00100000
#define ST77XX_MADCTL_ML 0b00010000
#define ST77XX_MADCTL_RGB 0b00000000
#define ST77XX_MADCTL_BGR 0b00001000
#define ST77XX_MADCTL_MH 0b00000100
Quantum Painter (#10174) * Install dependencies before executing unit tests. * Split out UTF-8 decoder. * Fixup python formatting rules. * Add documentation for QGF/QFF and the RLE format used. * Add CLI commands for converting images and fonts. * Add stub rules.mk for QP. * Add stream type. * Add base driver and comms interfaces. * Add support for SPI, SPI+D/C comms drivers. * Include <qp.h> when enabled. * Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789. * Add support for GC9A01. * Add support for ILI9341. * Add support for ILI9163. * Add support for SSD1351. * Implement qp_setpixel, including pixdata buffer management. * Implement qp_line. * Implement qp_rect. * Implement qp_circle. * Implement qp_ellipse. * Implement palette interpolation. * Allow for streams to work with either flash or RAM. * Image loading. * Font loading. * QGF palette loading. * Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images. * Image drawing. * Animations. * Font rendering. * Check against 256 colours, dump out the loaded palette if debugging enabled. * Fix build. * AVR is not the intended audience. * `qmk format-c` * Generation fix. * First batch of docs. * More docs and examples. * Review comments. * Public API documentation. 2022-04-13 14:00:18 +06:00			`// Copyright 2021 Paul Cotter (@gr1mr3aver)`
			`// SPDX-License-Identifier: GPL-2.0-or-later`

			`#pragma once`

			`////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////`
			`// Quantum Painter ST77XX command opcodes`

			`// System function commands`
			`#define ST77XX_CMD_NOP 0x00 // No operation`
			`#define ST77XX_CMD_RESET 0x01 // Software reset`
			`#define ST77XX_GET_ID_INFO 0x04 // Get ID information`
			`#define ST77XX_GET_STATUS 0x09 // Get status`
			`#define ST77XX_GET_PWR_MODE 0x0A // Get power mode`
			`#define ST77XX_GET_MADCTL 0x0B // Get mem access ctl`
			`#define ST77XX_GET_PIX_FMT 0x0C // Get pixel format`
			`#define ST77XX_GET_IMG_FMT 0x0D // Get image format`
			`#define ST77XX_GET_SIG_MODE 0x0E // Get signal mode`
			`#define ST77XX_CMD_SLEEP_ON 0x10 // Enter sleep mode`
			`#define ST77XX_CMD_SLEEP_OFF 0x11 // Exist sleep mode`
			`#define ST77XX_CMD_PARTIAL_ON 0x12 // Enter partial mode`
			`#define ST77XX_CMD_NORMAL_ON 0x13 // Exit partial mode`
			`#define ST77XX_CMD_INVERT_OFF 0x20 // Exit inverted mode`
			`#define ST77XX_CMD_INVERT_ON 0x21 // Enter inverted mode`
			`#define ST77XX_SET_GAMMA 0x26 // Set gamma params`
			`#define ST77XX_CMD_DISPLAY_OFF 0x28 // Disable display`
			`#define ST77XX_CMD_DISPLAY_ON 0x29 // Enable display`
			`#define ST77XX_SET_COL_ADDR 0x2A // Set column address`
			`#define ST77XX_SET_ROW_ADDR 0x2B // Set page (row) address`
			`#define ST77XX_SET_MEM 0x2C // Set memory`
			`#define ST77XX_GET_MEM 0x2E // Get memory`
			`#define ST77XX_SET_PARTIAL_AREA 0x30 // Set partial area`
			`#define ST77XX_CMD_TEARING_OFF 0x34 // Tearing line disabled`
			`#define ST77XX_CMD_TEARING_ON 0x35 // Tearing line enabled`
			`#define ST77XX_SET_MADCTL 0x36 // Set mem access ctl`
			`#define ST77XX_CMD_IDLE_OFF 0x38 // Exit idle mode`
			`#define ST77XX_CMD_IDLE_ON 0x39 // Enter idle mode`
			`#define ST77XX_SET_PIX_FMT 0x3A // Set pixel format`
			`#define ST77XX_GET_ID1 0xDA // Get ID1`
			`#define ST77XX_GET_ID2 0xDB // Get ID2`
			`#define ST77XX_GET_ID3 0xDC // Get ID3`

			`////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////`
			`// MADCTL Flags`
			`#define ST77XX_MADCTL_MY 0b10000000`
			`#define ST77XX_MADCTL_MX 0b01000000`
			`#define ST77XX_MADCTL_MV 0b00100000`
			`#define ST77XX_MADCTL_ML 0b00010000`
			`#define ST77XX_MADCTL_RGB 0b00000000`
			`#define ST77XX_MADCTL_BGR 0b00001000`
			`#define ST77XX_MADCTL_MH 0b00000100`