keychron_qmk_firmware/keyboards/neopad/readme.md

# Neopad

Neopad is a little macropad with four switches and two rotary encoders, made by through hole components only.
_Actually the number of switches is six, because even the encoder are allowed to click._

![Neopad](https://i.imgur.com/TgOkj2Fh.jpg "Neopad first proto")

The Neopad in the photo above is the first prototype. See the project repository for revision 1 update and KiCad files.

* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy)
* Hardware supported: ProMicro, _Elite-C (not tested)_
* Project repository: [Neopad on github](https://github.com/rookiebwoy/neopad)

Make example for this keyboard (after setting up your build environment):

    make neopad/rev1:default

Flashing example for this keyboard:

    make neopad/rev1:default:flash

When asked by the terminal, press the dedicated `QK_BOOT` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device.

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] Add Neopad macropad (#12614) 2021-05-15 09:09:10 +06:00			`# Neopad`

			`Neopad is a little macropad with four switches and two rotary encoders, made by through hole components only.`
			`_Actually the number of switches is six, because even the encoder are allowed to click._`

			`![Neopad](https://i.imgur.com/TgOkj2Fh.jpg "Neopad first proto")`

			`The Neopad in the photo above is the first prototype. See the project repository for revision 1 update and KiCad files.`

			`* Keyboard maintainer: [rookiebwoy](https://github.com/rookiebwoy)`
			`* Hardware supported: ProMicro, _Elite-C (not tested)_`
			`* Project repository: [Neopad on github](https://github.com/rookiebwoy/neopad)`

			`Make example for this keyboard (after setting up your build environment):`

			`make neopad/rev1:default`

			`Flashing example for this keyboard:`

			`make neopad/rev1:default:flash`

RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 16:34:17 +06:00			When asked by the terminal, press the dedicated `QK_BOOT` button (the one above the 2 LEDs) to enter the bootloader and let the OS detects the device.
[Keyboard] Add Neopad macropad (#12614) 2021-05-15 09:09:10 +06:00
			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`