keychron_qmk_firmware/keyboards/mechwild/puckbuddy/puckbuddy.c

308 lines
10 KiB
C
Raw Normal View History

[Keyboard] MechWild Puckbuddy (#17161) * Initial commit * testing modes * working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it. * needs to be updated from vial build * prepping for PR * added rgb mode cycling to fn1 since it isn't on the encoder for these maps * readme written in preparation for pr * reverting driver print line * Removed old reference to OBE in the readme from copypaste error * applying changes based on review * applying changes from review * Update keyboards/mechwild/puckbuddy/puckbuddy.c * trailing whitespaces removed * added clear screen condition for switching back to name rendering * Added uf2 keymap and fixed display glitch for the logo render art. * Removed extra definition of FEE_PAGE_BASE_ADDRESS * Removed the uf2 keymap and made it automatic when selecting bootloader instead * Fixed the bad bootloader check * moved the uf2 check from rules.mk to post_rules.mk to satisfy lint * changing it back to stm32-dfu bootloader default * Fixed RGBLIGHT enable oversight. * Added persistent dynamic tapping configuration for the cirque touchpad tap term * new lines at end of files for formatting and diff sanity * changing default bootloader back to stm32-dfu * Had to completely redefine the tap keycodes instead of using the DT_UP and DT_DOWN keycodes because I was not able to specify them easily in the via/vial configs and this allows me to keep the original functionality instead of tying it to eeprom like these are. * Added tap toggling keycodes to quick enable and disable the tapping term * working out an issue where the tap status keeps turning to off on power cycle * correcting submodule garbo * Fixed display issue and rewrote TAP config approach to make it a little easier to control * removing backup puckbuddy.c code * Added some comment, removed some commented out old code, removed trailing whitespace * Changed to handle tinyuf2 by expecting emulated eeprom so that adding other forms of eeprom can be handled for the memory offset separately, and added user oled conditional inside the keyboard oled code block * Updated default keymaps to have the tap and dpi keys on by default * Apply suggestions from code review * Apply suggestions from code review
2022-08-10 06:23:44 +06:00
// Copyright 2022 Kyle McCreery (@kylemccreery)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "puckbuddy.h"
#ifndef GLIDEPOINT_DPI_OPTIONS
# define GLIDEPOINT_DPI_OPTIONS \
{ 400, 800, 1200, 1600, 2000, 2400, 2800, 3200, 3600, 4000 }
# ifndef GLIDEPOINT_DPI_DEFAULT
# define GLIDEPOINT_DPI_DEFAULT 1
# endif
#endif
#ifndef GLIDEPOINT_DPI_DEFAULT
# define GLIDEPOINT_DPI_DEFAULT 1
#endif
keyboard_config_t keyboard_config;
uint16_t dpi_array[] = GLIDEPOINT_DPI_OPTIONS;
#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
void board_init(void) {
// B9 is configured as I2C1_SDA in the board file; that function must be
// disabled before using B7 as I2C1_SDA.
setPinInputHigh(B9);
}
#ifdef DYNAMIC_TAPPING_TERM_ENABLE
void tap_modify(int change_value, bool tap_status) {
if (keyboard_config.dt_term_config < 0) {
keyboard_config.dt_term_config *= -1;
}
keyboard_config.dt_term_config += change_value;
if (tap_status == false ) {
keyboard_config.dt_term_config *= -1;
g_tapping_term = 0;
} else {
g_tapping_term = keyboard_config.dt_term_config;
}
eeconfig_update_kb(keyboard_config.raw);
}
void tap_toggle(void) {
keyboard_config.dt_term_config *= -1;
if (keyboard_config.dt_term_config > 0) {
g_tapping_term = keyboard_config.dt_term_config;
} else {
g_tapping_term = 0;
}
eeconfig_update_kb(keyboard_config.raw);
}
#endif
#ifdef DIP_SWITCH_ENABLE
bool dip_switch_update_kb(uint8_t index, bool active) {
if (!dip_switch_update_user(index, active)) { return false; }
switch (index) {
case 0:
if(active) { tap_code(KC_CLCK); }
break;
break;
}
return true;
}
#endif
#ifdef ENCODER_ENABLE
bool encoder_update_kb(uint8_t index, bool clockwise) {
if (!encoder_update_user(index, clockwise)) { return false; }
switch (index) {
case 0:
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
break;
case 1:
if (clockwise) {
tap_code(KC_PGUP);
} else {
tap_code(KC_PGDN);
}
break;
}
return true;
}
#endif
#ifdef OLED_ENABLE // OLED Functionality
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
return OLED_ROTATION_180; // flips the display 180 degrees
}
bool clear_screen = true; // used to manage singular screen clears to prevent display glitch
bool clear_screen_art = true; // used to manage singular screen clears to prevent display glitch
static void render_name(void) { // Render Puckbuddy "Get Puck'd" text
static const char PROGMEM name_1[] = {0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0xB6, 0xB6, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x00};
static const char PROGMEM name_2[] = {0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xB6, 0xB6, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0x00};
static const char PROGMEM name_3[] = {0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xB6, 0xB6, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0x00};
oled_set_cursor(0,0);
oled_write_P(name_1, false);
oled_set_cursor(0,1);
oled_write_P(name_2, false);
oled_set_cursor(0,2);
oled_write_P(name_3, false);
}
static void render_logo(void) { // Render MechWild "MW" Logo
static const char PROGMEM logo_1[] = {0x97, 0x98, 0x99, 0x9A,0x00};
static const char PROGMEM logo_2[] = {0xB7, 0xB8, 0xB9, 0xBA, 0xBB, 0xBC, 0xBD, 0x00};
static const char PROGMEM logo_3[] = {0xD7, 0xD8, 0xD9, 0xDA, 0xDB, 0xDC, 0xDD, 0xB6, 0x00};
static const char PROGMEM logo_4[] = {0xB6, 0xB6, 0xB6, 0x9B, 0x9C, 0x9D, 0x9E, 0x00};
oled_set_cursor(0,0);
oled_write_P(logo_1, false);
oled_set_cursor(0,1);
oled_write_P(logo_2, false);
oled_set_cursor(0,2);
oled_write_P(logo_3, false);
oled_set_cursor(0,3);
oled_write_P(logo_4, false);
}
bool oled_task_kb(void) {
if(!oled_task_user()) {
return false;
}
if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && IS_HOST_LED_OFF(USB_LED_SCROLL_LOCK) && get_highest_layer(layer_state) == 0 ) {
if (clear_screen_art == true) {
oled_clear();
oled_render();
clear_screen_art = false;
}
render_name();
oled_set_cursor(0,3);
#ifdef POINTING_DEVICE_ENABLE
oled_write_P(PSTR(" DPI:"), false);
oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false);
#endif
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically
oled_write_P(PSTR(" TAP:"), false);
if (keyboard_config.dt_term_config < 0) {
oled_write_P(PSTR("Off "), false);
} else {
oled_write(get_u16_str(g_tapping_term, ' '), false);
}
#endif
clear_screen = true;
} else {
if (clear_screen == true) {
oled_clear();
oled_render();
clear_screen = false;
}
render_logo();
oled_set_cursor(8,1);
switch (get_highest_layer(layer_state)) {
case 0:
oled_write_P(PSTR("Layer 0"), false);
break;
case 1:
oled_write_P(PSTR("Layer 1"), false);
break;
case 2:
oled_write_P(PSTR("Layer 2"), false);
break;
case 3:
oled_write_P(PSTR("Layer 3"), false);
break;
default:
oled_write_P(PSTR("Layer ?"), false); // Should never display, here as a catchall
}
led_t led_state = host_keyboard_led_state();
oled_set_cursor(8,0);
oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false);
oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false);
oled_write_P(led_state.scroll_lock ? PSTR("SCR") : PSTR(" "), false);
#ifdef POINTING_DEVICE_ENABLE
oled_set_cursor(8,2);
oled_write_P(PSTR("DPI:"), false);
oled_write(get_u16_str(dpi_array[keyboard_config.dpi_config], ' '), false);
#endif
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only display tap info if it is being configured dynamically
oled_set_cursor(8,3);
oled_write_P(PSTR("TAP:"), false);
if (keyboard_config.dt_term_config < 0) {
oled_write_P(PSTR("Off "), false);
} else {
oled_write(get_u16_str(g_tapping_term, ' '), false);
}
#endif
clear_screen_art = true;
}
return true;
}
#endif
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
switch(keycode) {
#ifdef POINTING_DEVICE_ENABLE
case DPI_UP:
if (record->event.pressed) {
keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE;
eeconfig_update_kb(keyboard_config.raw);
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
}
return false;
case DPI_DN:
if (record->event.pressed) {
if (keyboard_config.dpi_config > 0) {
keyboard_config.dpi_config = (keyboard_config.dpi_config - 1) % DPI_OPTION_SIZE;
} else {
keyboard_config.dpi_config = DPI_OPTION_SIZE - 1;
}
eeconfig_update_kb(keyboard_config.raw);
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
}
return false;
case DPI_FINE:
if (record->event.pressed) {
pointing_device_set_cpi(dpi_array[0]);
} else {
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
}
return false;
#endif
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only include tap info keycodes if it is being configured dynamically
case TAP_UP:
if (record->event.pressed) {
tap_modify(DYNAMIC_TAPPING_TERM_INCREMENT, true);
}
return false;
case TAP_DN:
if (record->event.pressed) {
if (keyboard_config.dt_term_config > 0) {
tap_modify(-1 * DYNAMIC_TAPPING_TERM_INCREMENT, true);
}
}
return false;
case TAP_ON:
if (record->event.pressed) {
tap_modify(0, true);
}
return false;
case TAP_OFF:
if (record->event.pressed) {
tap_modify(0, false);
}
return false;
case TAP_TOG:
if (record->event.pressed) {
tap_toggle();
}
return false;
#endif
}
return process_record_user(keycode, record);
}
void pointing_device_init_kb(void) {
#ifdef POINTING_DEVICE_ENABLE
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
#endif
}
void eeconfig_init_kb(void) {
#ifdef POINTING_DEVICE_ENABLE
keyboard_config.dpi_config = GLIDEPOINT_DPI_DEFAULT;
#endif
#ifdef DYNAMIC_TAPPING_TERM_ENABLE // only set tap term from eeprom if it is being configured dynamically
keyboard_config.dt_term_config = TAPPING_TERM;
#endif
eeconfig_update_kb(keyboard_config.raw);
eeconfig_init_user();
}
void matrix_init_kb(void) {
// is safe to just read DPI setting since matrix init
// comes before pointing device init.
keyboard_config.raw = eeconfig_read_kb();
#ifdef POINTING_DEVICE_ENABLE
if (keyboard_config.dpi_config > DPI_OPTION_SIZE) {
eeconfig_init_kb();
}
#endif
matrix_init_user();
}
void keyboard_post_init_kb(void) {
#ifdef POINTING_DEVICE_ENABLE
pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]);
#endif
#ifdef RGBLIGHT_ENABLE
rgblight_toggle_noeeprom(); //double toggle post init removes the weirdness with rgb strips having a yellow first LED
rgblight_toggle_noeeprom();
#endif
#ifdef DYNAMIC_TAPPING_TERM_ENABLE
tap_toggle(); // Need it to reevaluate this setting after initiating so that it is current after init
tap_toggle();
#endif
keyboard_post_init_user();
#ifdef OLED_ENABLE // purposefully after user post init to allow the RGB to startup first
wait_ms(200); // Avoids a startup issue where the oled renders and then turns off with blackpill
oled_on();
#endif
}