keychron_qmk_firmware/keyboards/acheron/arctic/rules.mk

# MCU name
MCU = STM32F072

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = yes      # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes       # Mouse keys
EXTRAKEY_ENABLE = yes       # Audio control and System control
CONSOLE_ENABLE = yes        # Console for debug
COMMAND_ENABLE = yes        # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes           # USB Nkey Rollover
BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no           # Audio output on port C6

# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
[Keyboard] Add ArcticPCB pre-Alpha support (#8479) * Add initial ArcticPCB support * Added README * Solve info.json comma issue * Apply suggestions from noroadsleft code review Use the LAYOUT_60_tsangan_hhkb Community Layout * Apply suggestions from tzarc * Add license header to arctic.c, arctic.h and config.h * Remove redundant tsangan keymap * Remove tsangan compilation suggestion from readme 2020-08-04 11:13:33 +06:00			`# MCU name`
			`MCU = STM32F072`

			`# Build Options`
			`# change yes to no to disable`
			`#`
			`BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration`
			`MOUSEKEY_ENABLE = yes # Mouse keys`
			`EXTRAKEY_ENABLE = yes # Audio control and System control`
			`CONSOLE_ENABLE = yes # Console for debug`
			`COMMAND_ENABLE = yes # Commands for debug and configuration`
			`# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE`
			`SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend`
			`# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work`
			`NKRO_ENABLE = yes # USB Nkey Rollover`
			`BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality`
			`RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow`
			`BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID`
			`AUDIO_ENABLE = no # Audio output on port C6`

			`# Enter lower-power sleep mode when on the ChibiOS idle thread`
			`OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE`