keychron_qmk_firmware/keyboards/coarse/vinta/readme.md

Vinta
=========

[Vinta](https://i.imgur.com/huX3lff.jpg)


This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.

Keyboard Maintainer: [Coarse](https://github.com/coarse)  
Hardware Supported: Vinta with STM32F042K6T6  
Hardware Availability: Private Groupbuy

Make example for this keyboard (after setting up your build environment):

    make coarse/vinta:default

See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.

#### Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.  
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).
Keyboard: Vinta (#4283) * added initial config files for vinta * added readme * changed product id and device ver * fixed keymap illustration * updated rules.mk to enable more commands * removed a bunch of pre-code text; changed some grammar woopsies * removed bootmagic lite * updated developer's note * updated readme.md 2018-10-30 11:00:40 +06:00			`Vinta`
			`=========`

			`[Vinta](https://i.imgur.com/huX3lff.jpg)`


			`This is an ARM-powered 65% keyboard PCB with USB Mini B connector and breakout for optional RGB underglow.`

Rework as per 9824 (#13898) 2021-08-06 04:14:43 +06:00			`Keyboard Maintainer: [Coarse](https://github.com/coarse)`
Keyboard: Vinta (#4283) * added initial config files for vinta * added readme * changed product id and device ver * fixed keymap illustration * updated rules.mk to enable more commands * removed a bunch of pre-code text; changed some grammar woopsies * removed bootmagic lite * updated developer's note * updated readme.md 2018-10-30 11:00:40 +06:00			`Hardware Supported: Vinta with STM32F042K6T6`
Rework as per 9824 (#13898) 2021-08-06 04:14:43 +06:00			`Hardware Availability: Private Groupbuy`
Keyboard: Vinta (#4283) * added initial config files for vinta * added readme * changed product id and device ver * fixed keymap illustration * updated rules.mk to enable more commands * removed a bunch of pre-code text; changed some grammar woopsies * removed bootmagic lite * updated developer's note * updated readme.md 2018-10-30 11:00:40 +06:00
			`Make example for this keyboard (after setting up your build environment):`

Rework as per 9824 (#13898) 2021-08-06 04:14:43 +06:00			`make coarse/vinta:default`
Keyboard: Vinta (#4283) * added initial config files for vinta * added readme * changed product id and device ver * fixed keymap illustration * updated rules.mk to enable more commands * removed a bunch of pre-code text; changed some grammar woopsies * removed bootmagic lite * updated developer's note * updated readme.md 2018-10-30 11:00:40 +06:00
Modified URLs to point to new locations 2019-01-13 06:51:21 +06:00			`See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.`
Keyboard: Vinta (#4283) * added initial config files for vinta * added readme * changed product id and device ver * fixed keymap illustration * updated rules.mk to enable more commands * removed a bunch of pre-code text; changed some grammar woopsies * removed bootmagic lite * updated developer's note * updated readme.md 2018-10-30 11:00:40 +06:00
			`#### Developer's Note`

RESET -> QK_BOOT keyboard readme (#18110) 2022-08-20 16:34:17 +06:00			STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a `QK_BOOT` keycode nor using bootmagic or bootmagic lite.
			The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a `QK_BOOT` keycode).