keychron_qmk_firmware/keyboards/for_science/readme.md

# For Science

![for_science](https://raw.githubusercontent.com/peej/for-science-keyboard/master/pcb.png)

A split ergo 4x5 keyboard with 3 thumb keys where each half is smaller than the 100x100mm cheap PCB production size. 
Designed to be easy to build, it only supports serial communication over a TRRS cable and no LED support.
The PCB is reversible, meaning that you use the same PCB for both the left and right halves and thus need two PCBs to create a full keyboard.

* Keyboard Maintainer: [Peej](https://github.com/peej)
* Hardware Supported: Pro Micro
* Hardware Availability: [Github](https://github.com/peej/for-science-keyboard)

Make example for this keyboard (after setting up your build environment):

    make for_science:default

See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.
Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
[Keyboard] For Science (#9607) * Add a compiling layout based on minidox * Add the correct pins * Add old for science code * Update to 2020 standards * Get the keymap working * update config * Update pinout * Fix pins * Make requested changes * Add info.json for configurator * for science - PR comments * Apply suggestions from code review 2020-08-26 22:55:18 +06:00			`# For Science`

			`![for_science](https://raw.githubusercontent.com/peej/for-science-keyboard/master/pcb.png)`

			`A split ergo 4x5 keyboard with 3 thumb keys where each half is smaller than the 100x100mm cheap PCB production size.`
			`Designed to be easy to build, it only supports serial communication over a TRRS cable and no LED support.`
			`The PCB is reversible, meaning that you use the same PCB for both the left and right halves and thus need two PCBs to create a full keyboard.`

			`* Keyboard Maintainer: [Peej](https://github.com/peej)`
			`* Hardware Supported: Pro Micro`
			`* Hardware Availability: [Github](https://github.com/peej/for-science-keyboard)`

			`Make example for this keyboard (after setting up your build environment):`

			`make for_science:default`

			`See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information.`
			`Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).`