mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-23 17:06:52 +06:00
4a3eb3bdd4
* Added support for the b.face keyboard This commit adds support for the 60% keyboard from winkeyless, the b.face. The basic keyboard layout as well as the RGB backlighting works as expected; the per-key LEDs can be turned on or off but not yet dimmed. A default 60% US-layout is included. * Added link to the bface in the ps2avrGB README
95 lines
2.3 KiB
C
95 lines
2.3 KiB
C
/* Copyright 2017 Sebastian Kaim
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef BACKLIGHT_ENABLE
|
|
|
|
#include "backlight_ps2avrGB.h"
|
|
#define sbi(reg,bit) reg |= (_BV(bit))
|
|
#define cbi(reg,bit) reg &= (~_BV(bit))
|
|
#define PWM10 WGM10
|
|
#define PWM11 WGM11
|
|
#define COM1x1 COM1B1
|
|
#define OCR1x OCR1B
|
|
|
|
void backlight_init_ports(void)
|
|
{
|
|
#if BACKLIGHT_ON_STATE == 0
|
|
backlight_off();
|
|
#else
|
|
backlight_on();
|
|
#endif
|
|
|
|
// setup pwm
|
|
// this bitmagic is sourced from the original firmware
|
|
/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
|
|
TCNT1H = 0;
|
|
TCNT1L = 0;
|
|
sbi(TIMSK, TOIE1);
|
|
OCR1BH = 0;
|
|
OCR1BL = 0;
|
|
cbi(TCCR1A,PWM11);
|
|
sbi(TCCR1A,PWM10);
|
|
sbi(TCCR1A,COM1B1);
|
|
cbi(TCCR1A,COM1B0);*/
|
|
ICR1 = 0xFFFF;
|
|
|
|
TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
|
|
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
|
|
|
backlight_init();
|
|
}
|
|
|
|
void backlight_set(uint8_t level)
|
|
{
|
|
if( level == 0 ) {
|
|
backlight_off();
|
|
}
|
|
else {
|
|
backlight_on();
|
|
/*uint8_t pwm = get_pwm_for_brightness(level);
|
|
set_backlight_pwm(pwm);
|
|
TCCR1A |= _BV(COM1x1);
|
|
OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
|
|
}
|
|
}
|
|
|
|
#define PWM_MAX 0xFF
|
|
uint8_t get_pwm_for_brightness(uint8_t level)
|
|
{
|
|
// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
|
|
uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
|
|
return (uint8_t)brightness;
|
|
}
|
|
|
|
void backlight_on(void)
|
|
{
|
|
//_SFR_IO8(0x12) |= _BV(0x4);
|
|
LED_PIN |= BACKLIGHT_PORT_NUM;
|
|
}
|
|
|
|
void backlight_off(void)
|
|
{
|
|
//_SFR_IO8(0x12) &= ~_BV(0x4);
|
|
LED_PIN &= ~BACKLIGHT_PORT_NUM;
|
|
}
|
|
|
|
void set_backlight_pwm(uint8_t level) {
|
|
// this does not work (yet)
|
|
//OCR1B = level;
|
|
}
|
|
|
|
#endif // BACKLIGHT_ENABLE
|