mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-11 12:45:33 +06:00
Code Issues Packages Projects Releases Wiki Activity
f0e4bc937a
keychron_qmk_firmware/keyboards/etiennecollin/wave/readme.md
Etienne Collin aaebb0a231
Add Wave keyboard (#22054) 
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2023-10-04 21:47:34 -07:00

1.8 KiB
Raw Blame History

Wave

Wave pcb

The Wave is a small, reversible keyboard inspired by the Ferris, the Ferris Sweep, the Swoop and the Sweep36. It aims to solve a few issues I found with the keyboards.

Make example for this keyboard (after setting up your build environment):

make etiennecollin/wave:default

Flashing example for this keyboard:

make etiennecollin/wave:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Recommended Keymap

For an everyday keyboard, it is recommended to use the feature keymap, as the default keymap is extremely barebone. Here is a make example:

make etiennecollin/wave:feature

Flashing example:

make etiennecollin/wave:feature:flash

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top left key of the left half of the keyboard and plug in the keyboard
  • Physical reset button: Briefly press the reset button on the front of the PCB or short the GND and RST pins on the controller
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available