mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-01 21:26:55 +06:00
Code Issues Packages Projects Releases Wiki Activity
f043a2d902
keychron_qmk_firmware/keyboards/sixkeyboard
History
Ryan 4869b8061c
Move ortho & numpad layouts to data driven (#20183) 
Co-authored-by: Nick Brassel <nick@tzarc.org>
2023-03-29 15:54:34 +11:00
..
keymaps
config.h
info.json Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
matrix.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00
readme.md
rules.mk Migrate MCU and BOOTLOADER to data-driven (#19529) 2023-02-08 18:41:46 +11:00
sixkeyboard.c Move ortho & numpad layouts to data driven (#20183) 2023-03-29 15:54:34 +11:00

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community
Hardware Supported: Techkeys SixKeyBoard PCB
Hardware Availability: Techkeys

Make example for this keyboard (after setting up your build environment):

make sixkeyboard:default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.