mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-23 17:06:52 +06:00
Code Issues Packages Projects Releases Wiki Activity
d53432393b
keychron_qmk_firmware/keyboards/cod67
History
Jeremy Bernhardt c8cbee5d71 Modified URLs to point to new locations
2019-01-13 09:11:18 -08:00
..
keymaps/default Remove empty fn_actions[] 2019-01-11 18:32:43 -08:00
cod67.c COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
cod67.h COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
config.h COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
info.json COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk COD67 "Support" (#3332) 2018-07-07 11:47:24 -07:00

readme.md

Gray COD67

![cod67](imgur.com image replace me!)

The Gray COD67 is a 60% keyboard with a modern and bold design. It features 20 RGB Underglow LED lights and a unique diffuser placement. The COD67 has the most stunning RGB light strip for a custom mechanical keyboard. It also features a center mounted USB C port.

There were only 75 units made worldwide.

Keyboard Maintainer: MechMerlin
Hardware Supported: Gray COD67 Hardware Availability: Zfrontier

At this time, flashing ONLY works on Windows systems.

To put in bootloader mode, hold the Esc key while plugging in the USB cable.

The COD67 will show up as a drive.

Make example for this keyboard (after setting up your build environment):

make cod67:default:bin

See build environment setup then the make instructions for more information.

Rename the resulting .bin file to cod67.bin.

Drag and drop cod67.bin to the drive, overwriting the previous cod67.bin stored on it.

Press the Esc key again to reset the board. You are now ready to type!

Notes

The backlight pin is attached to a non PWM pin D4 so backlight is only on/off.