mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-30 20:56:32 +06:00
7f8922ae7b
* Move Satan into the GH60 directory to avoid the confusion of what PCB people have * set bootmagic to lite * rename gh60 file to revc
36 lines
1.4 KiB
Markdown
36 lines
1.4 KiB
Markdown
# Satan GH60
|
|
|
|
A clone of the GH60 60% keyboard, with full backlighting support.
|
|
|
|
Keyboard Maintainer: QMK Community
|
|
Hardware Supported: Satan GH60 PCB
|
|
Hardware Availability: https://www.1upkeyboards.com/shop/controllers/gh60-satan-pcb/
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make gh60/satan:default
|
|
|
|
**Note:** This GH60 Satan firmware will not be compatible with the GH60 Rev C PCB. Conversely, the GH60 Rev C firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing.
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## RGB Underglow (WS2812B LED Strip)
|
|
|
|
This board also supports underglow with a slight mod.
|
|
|
|
Connect the DIN pad of the LED strip to PE2 on the ATmega32U4, like so:
|
|
|
|
|
|
|
|
Then connect VCC and GND to pins 1 and 6 at the bottom of the PCB:
|
|
|
|
|
|
|
|
## ISP Header
|
|
|
|
If you want to flash another bootloader (such as QMK-DFU), or can't get into the bootloader in the first place, the row of pins at the bottom can be used to ISP flash the board:
|
|
|
|
| 1 | 2 | 3 | 4 | 5 | 6 | 7 |
|
|
|---|----|---|----|-----|---|----|
|
|
|VCC|MISO|SCK|MOSI|RESET|GND|*NC*|
|