mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-11 20:58:15 +06:00
Code Issues Packages Projects Releases Wiki Activity
a2ed670eee
keychron_qmk_firmware/keyboards/handwired/tractyl_manuform
History
Drashna Jaelre c4551d7ef1
[Keymap] Reorganization, cleanup and readmes for drashna code (#15617)
2021-12-29 20:17:34 -08:00
..
4x6_right [Keymap] Reorganization, cleanup and readmes for drashna code (#15617) 2021-12-29 20:17:34 -08:00
5x6_right [Keymap] Reorganization, cleanup and readmes for drashna code (#15617) 2021-12-29 20:17:34 -08:00
config.h Updates to drashna keymap and minor updates to tractyl manuform (#15101) 2021-11-10 06:10:00 -08:00
post_config.h
readme.md [Keyboard] Update Tractyl Manuform config for F411 (#14770) 2021-10-09 11:31:13 -07:00
tm_sync.c [Keymap] Unicode and Pointing Device and Autocorect for drashna keymaps (#15415) 2021-12-14 20:53:36 -08:00
tractyl_manuform.c [Keymap] Unicode and Pointing Device and Autocorect for drashna keymaps (#15415) 2021-12-14 20:53:36 -08:00
tractyl_manuform.h [Keymap] Unicode and cursor sync - drashna keymap (#15328) 2021-11-28 23:41:59 -08:00

readme.md

Tractyl Manuform (4x6, 5x6)

the Dactyl-Manuform is a split curved keyboard based on the design of adereth dactyl and thumb cluster design of the manuform keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. Imgur

  • Keyboard Maintainer: drashna
  • Hardware Supported: Teensy 2.0++, WeAct BlackPill F411

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411/drashna:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available