mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-01 13:16:50 +06:00
…
|
||
---|---|---|
.. | ||
r2 | ||
info.json | ||
readme.md |
NCR-80
Re-imagination of the classic rebranded Cherry G81-3000 by NCR
NCR-80 is an affordable keyboard kit inspired by iconic vintage keyboards.
- Keyboard Maintainer: QMK Community
- Hardware Supported:
- NCR-80 R2 PCBs (ATmega32U4, atmel-dfu)
- Hardware Availability:
- R2 Hotswap: AliExpress Taobao 淘宝
- R2 Solder: AliExpress Taobao 淘宝
Make example for this keyboard (after setting up your build environment):
make mt/ncr80/r2/hotswap:default
make mt/ncr80/r2/solder:default
Flashing example for this keyboard:
make mt/ncr80/r2/hotswap:default:flash
make mt/ncr80/r2/solder:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the top left key and plug in the keyboard. This will also clear EEPROM, so it is a good first step if the keyboard is misbehaving.
- Physical reset button: Briefly press the button on the back of the PCB
- Keycode in layout: There is no key mapped to
QK_BOOT
in the pre-created keymaps, but you may assign this key in any keymaps you create.