mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-12-11 20:58:15 +06:00

History

Ryan ad625e7c06 Remove `RGB_DI_PIN` ifdefs (#20218 )		2023-03-23 21:38:01 +11:00
..
keymaps
config.h	Remove `RGB_DI_PIN` ifdefs (#20218 )	2023-03-23 21:38:01 +11:00
elise.h
info.json	Move matrix config to info.json, part 4 (#20001 )	2023-03-11 00:00:24 +11:00
readme.md
rules.mk	Migrate `MCU` and `BOOTLOADER` to data-driven (#19529 )	2023-02-08 18:41:46 +11:00

readme.md

ELISE

A open source, low cost 65% keyboard PCB with USB-C, ESD protection, RGB underglow and XD68 case / plate compatability. Designed in the UK. More info / sales / PCB designs available at draytronics.co.uk/elise

Keyboard Maintainer: Blake Drayson
Hardware Supported: ELISE PCB / ATMega32U4
Hardware Availability: draytronics.co.uk

Entering DFU mode (to allow flashing):

Pressing the reset button on the back of the board when it is plugged in will enter DFU.
Holding down the ESC key whilst plugging in the keyboard will enter DFU.
If you have one of the provided keymaps flashed, then pressing FN-Tab will enter DFU.

Make example for this keyboard (after setting up your build environment):

make draytronics/elise:default

Flashing example for this keyboard:

make draytronics/elise:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.