mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-13 05:38:51 +06:00
baa564bddf
* Remove references to bootloadHID flashing page in keyboard readmes * Remove bootloadHID flashing page
1.1 KiB
1.1 KiB
EVE Meteor
60% PCB with Function Row
- Keyboard Maintainer: MechMerlin
- Hardware Supported: EVE Meteor
- Hardware Availability: zFrontier
Make example for this keyboard (after setting up your build environment):
make eve/meteor:default
Flashing example for this keyboard:
make eve/meteor:default:flash
Reset Key: Short the two holes labeled FW_JP
underneath the PCB, beside the Tab key while plugging in the keyboard.
Do not confuse this with the LED holes of the switch in the Tab
position. FW_JP
is not reachable from the top as the plate blocks access to it.
If your PCB does not have this circuit exposed, you must hold down the key corresponding to pins A0 and B0 on the MCU. On at least the red EVE PCB, this is the +/= key (second row, 13th column).
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.