mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-13 13:46:51 +06:00
32 lines
1.6 KiB
Markdown
32 lines
1.6 KiB
Markdown
# Nearfield
|
|
|
|
|
|
|
|
The LZ ErGO is a classic ergonomic design, predating the alice layout, and drawing inspiration from the "Microsoft natural ergonomic" series.
|
|
Nearfield expands on this by increasing the rotation of the two halves of the alpha cluster, each half is rotated 15 degrees towards the center of the board.
|
|
This increased angle forces the user to widen their elbow stance, and align their hands straighter with their forearms while typing.
|
|
|
|
Aesthetic design: Aside from the obvious layout homage to the ergo, retaining the nav cluster,
|
|
the case design draws inspiration from the M0110 keyboard series from Apple.
|
|
|
|
bog standard mx and alps support pcb, uses unified c3 daughterboard. 100mm JST cable recommended.
|
|
|
|
|
|
* Keyboard Maintainer: [TJ Campie](https://github.com/tominabox1)
|
|
* Hardware Supported: Nearfield
|
|
* Hardware Availability: [Cannonkeys](https://cannonkeys.com/collections/nearfield/products/nearfield-extra-pcb-and-daughterboard)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make nearfield:default
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|