mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-24 01:17:07 +06:00
207 lines
7.1 KiB
C
207 lines
7.1 KiB
C
/* Copyright 2018 Jack Humbert
|
|
* Copyright 2018 Yiancar
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/* This library is only valid for STM32 processors.
|
|
* This library follows the convention of the AVR i2c_master library.
|
|
* As a result addresses are expected to be already shifted (addr << 1).
|
|
* I2CD1 is the default driver which corresponds to pins B6 and B7. This
|
|
* can be changed.
|
|
* Please ensure that HAL_USE_I2C is TRUE in the halconf.h file and that
|
|
* STM32_I2C_USE_I2C1 is TRUE in the mcuconf.h file. Pins B6 and B7 are used
|
|
* but using any other I2C pins should be trivial.
|
|
*/
|
|
#include "quantum.h"
|
|
#include "i2c_master.h"
|
|
#include <string.h>
|
|
#include <ch.h>
|
|
#include <hal.h>
|
|
|
|
#ifndef I2C1_SCL_PIN
|
|
# define I2C1_SCL_PIN B6
|
|
#endif
|
|
#ifndef I2C1_SDA_PIN
|
|
# define I2C1_SDA_PIN B7
|
|
#endif
|
|
|
|
#ifdef USE_I2CV1
|
|
# ifndef I2C1_OPMODE
|
|
# define I2C1_OPMODE OPMODE_I2C
|
|
# endif
|
|
# ifndef I2C1_CLOCK_SPEED
|
|
# define I2C1_CLOCK_SPEED 100000 /* 400000 */
|
|
# endif
|
|
# ifndef I2C1_DUTY_CYCLE
|
|
# define I2C1_DUTY_CYCLE STD_DUTY_CYCLE /* FAST_DUTY_CYCLE_2 */
|
|
# endif
|
|
#else
|
|
// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
|
|
// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
|
|
# ifndef I2C1_TIMINGR_PRESC
|
|
# define I2C1_TIMINGR_PRESC 0U
|
|
# endif
|
|
# ifndef I2C1_TIMINGR_SCLDEL
|
|
# define I2C1_TIMINGR_SCLDEL 7U
|
|
# endif
|
|
# ifndef I2C1_TIMINGR_SDADEL
|
|
# define I2C1_TIMINGR_SDADEL 0U
|
|
# endif
|
|
# ifndef I2C1_TIMINGR_SCLH
|
|
# define I2C1_TIMINGR_SCLH 38U
|
|
# endif
|
|
# ifndef I2C1_TIMINGR_SCLL
|
|
# define I2C1_TIMINGR_SCLL 129U
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef I2C_DRIVER
|
|
# define I2C_DRIVER I2CD1
|
|
#endif
|
|
|
|
#ifdef USE_GPIOV1
|
|
# ifndef I2C1_SCL_PAL_MODE
|
|
# define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
|
|
# endif
|
|
# ifndef I2C1_SDA_PAL_MODE
|
|
# define I2C1_SDA_PAL_MODE PAL_MODE_ALTERNATE_OPENDRAIN
|
|
# endif
|
|
#else
|
|
// The default PAL alternate modes are used to signal that the pins are used for I2C
|
|
# ifndef I2C1_SCL_PAL_MODE
|
|
# define I2C1_SCL_PAL_MODE 4
|
|
# endif
|
|
# ifndef I2C1_SDA_PAL_MODE
|
|
# define I2C1_SDA_PAL_MODE 4
|
|
# endif
|
|
#endif
|
|
|
|
static uint8_t i2c_address;
|
|
|
|
static const I2CConfig i2cconfig = {
|
|
#if defined(USE_I2CV1_CONTRIB)
|
|
I2C1_CLOCK_SPEED,
|
|
#elif defined(USE_I2CV1)
|
|
I2C1_OPMODE,
|
|
I2C1_CLOCK_SPEED,
|
|
I2C1_DUTY_CYCLE,
|
|
#elif defined(WB32F3G71xx)
|
|
I2C1_OPMODE,
|
|
I2C1_CLOCK_SPEED,
|
|
#else
|
|
// This configures the I2C clock to 400khz assuming a 72Mhz clock
|
|
// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
|
|
STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) | STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) | STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH) | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL), 0, 0
|
|
#endif
|
|
};
|
|
|
|
static i2c_status_t chibios_to_qmk(const msg_t* status) {
|
|
switch (*status) {
|
|
case I2C_NO_ERROR:
|
|
return I2C_STATUS_SUCCESS;
|
|
case I2C_TIMEOUT:
|
|
return I2C_STATUS_TIMEOUT;
|
|
// I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
|
|
default:
|
|
return I2C_STATUS_ERROR;
|
|
}
|
|
}
|
|
|
|
__attribute__((weak)) void i2c_init(void) {
|
|
static bool is_initialised = false;
|
|
if (!is_initialised) {
|
|
is_initialised = true;
|
|
|
|
// Try releasing special pins for a short time
|
|
palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT);
|
|
palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT);
|
|
|
|
chThdSleepMilliseconds(10);
|
|
#if defined(USE_GPIOV1)
|
|
palSetLineMode(I2C1_SCL_PIN, I2C1_SCL_PAL_MODE);
|
|
palSetLineMode(I2C1_SDA_PIN, I2C1_SDA_PAL_MODE);
|
|
#else
|
|
palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN);
|
|
palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
i2c_status_t i2c_start(uint8_t address) {
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
return I2C_STATUS_SUCCESS;
|
|
}
|
|
|
|
i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = address;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
|
|
uint8_t complete_packet[length + 1];
|
|
for (uint16_t i = 0; i < length; i++) {
|
|
complete_packet[i + 1] = data[i];
|
|
}
|
|
complete_packet[0] = regaddr;
|
|
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
|
|
uint8_t complete_packet[length + 2];
|
|
for (uint16_t i = 0; i < length; i++) {
|
|
complete_packet[i + 2] = data[i];
|
|
}
|
|
complete_packet[0] = regaddr >> 8;
|
|
complete_packet[1] = regaddr & 0xFF;
|
|
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 2, 0, 0, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), ®addr, 1, data, length, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) {
|
|
i2c_address = devaddr;
|
|
i2cStart(&I2C_DRIVER, &i2cconfig);
|
|
uint8_t register_packet[2] = {regaddr >> 8, regaddr & 0xFF};
|
|
msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), register_packet, 2, data, length, TIME_MS2I(timeout));
|
|
return chibios_to_qmk(&status);
|
|
}
|
|
|
|
void i2c_stop(void) { i2cStop(&I2C_DRIVER); }
|