mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-30 12:47:37 +06:00
805f5cb72b
This commits add the SH_OS keycode, which works similarly to one shot layers: * while pressed, the keyboard is swapped * if no keys were pressed while it was pressed, the next key press is swapped SH_OS also supports chaining with one shot layers: OSL(x) + SH_OS + key interprets the key press on the oneshot layer. The ONESHOT_TIMEOUT setting used by one shot keys and layers is also used by oneshot swap hands. In the above chaining scenario the timeout of the oneshot layer is reset when swap hands is activated. Resolves #2682
32 lines
2.2 KiB
Markdown
32 lines
2.2 KiB
Markdown
# Swap-Hands Action
|
|
|
|
The swap-hands action allows support for one-handed typing without requiring a separate layer. Set `SWAP_HANDS_ENABLE` in the Makefile and define a `hand_swap_config` entry in your keymap. Now whenever the `ACTION_SWAP_HANDS` command key is pressed the keyboard is mirrored. For instance, to type "Hello, World" on QWERTY you would type `^Ge^s^s^w^c W^wr^sd`
|
|
|
|
## Configuration
|
|
|
|
The configuration table is a simple 2-dimensional array to map from column/row to new column/row. Example `hand_swap_config` for Planck:
|
|
|
|
```C
|
|
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
|
|
{{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}},
|
|
{{11, 1}, {10, 1}, {9, 1}, {8, 1}, {7, 1}, {6, 1}, {5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}},
|
|
{{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}},
|
|
{{11, 3}, {10, 3}, {9, 3}, {8, 3}, {7, 3}, {6, 3}, {5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}},
|
|
};
|
|
```
|
|
|
|
Note that the array indices are reversed same as the matrix and the values are of type `keypos_t` which is `{col, row}` and all values are zero-based. In the example above, `hand_swap_config[2][4]` (third row, fifth column) would return `{7, 2}` (third row, eighth column). Yes, this is confusing.
|
|
|
|
## Swap Keycodes
|
|
|
|
|Key |Description |
|
|
|-----------|-------------------------------------------------------------------------|
|
|
|`SH_T(key)`|Sends `key` with a tap; momentary swap when held. |
|
|
|`SH_ON` |Turns on swapping and leaves it on. |
|
|
|`SH_OFF` |Turn off swapping and leaves it off. Good for returning to a known state.|
|
|
|`SH_MON` |Swaps hands when pressed, returns to normal when released (momentary). |
|
|
|`SH_MOFF` |Momentarily turns off swap. |
|
|
|`SH_TG` |Toggles swap on and off with every key press. |
|
|
|`SH_TT` |Toggles with a tap; momentary when held. |
|
|
|`SH_OS` |One shot swap hands: toggles while pressed or until next key press. |
|