mirrors/keychron_qmk_firmware
mirrors/keychron_qmk_firmware
0
0
Fork 0
mirror of https://github.com/Keychron/qmk_firmware.git synced 2024-11-30 12:47:37 +06:00
Code Issues Packages Projects Releases Wiki Activity

Edit README of PC98

Browse Source
This commit is contained in:
tmk 2013-02-23 01:15:03 +09:00
parent 4ec8fd2823
commit 84a3d4d2a1
1 changed files with 41 additions and 55 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
converter/pc98_usb/README
View File

@ -1,79 +1,65 @@
Sun to USB keyboard protocol converter PC98 to USB keyboard protocol converter
====================================== =======================================
Target MCU is ATMega32u4 but other USB capable AVR will also work. Target MCU is ATMega32u4 but other USB capable AVR will also work.
Supported keyboards: Sun Type 5 Keyboard, CTCSP SHORT TYPE KEYBOARD(CKUB)
CTCSP SHORT TYPE KEYBOARD: http://imgur.com/a/QIv6p
Connector Connector
--------- ---------
8Pin mini DIN
___ ___
/ |_| \
/ 8 7 6 \
| 5 4 3 |
\_ 2 1 _/
\_____/
(receptacle)
Wiring: 8Pin mini DIN
___ ___
/ |_| \
/ 8 7 6 \
| 5 4 3 |
\_ 2 1 _/
\_____/
(receptacle)
Wiring: You can change this with ediging config.h.
Pin mini DIN MCU Pin mini DIN MCU
---------------------------------- ----------------------------------
1 GND GND 1 ~RST PD1
2 GND GND 2 GND GND
3 5V 3 ~RDY PD4
4 RX/TX(Mouse) 4 RXD PD2
5 RX PD3 5 ~RTY PD5
6 TX PD2 6 NC
7 GND GND 7 NC
8 5V VCC 8 5V VCC
Protocol Protocol
-------- --------
Singnal: Asynchronous, Negative logic, 1200baud, No Flow control Singnal: Asynchronous, Positive logic, 19200baud, Least bit first
Frame format: 1-Start bit, 8-Data bits, No-Parity, 1-Stop bit Frame format: 1-Start bit(Lo), 8-Data bits, Odd-Parity, 1-Stop bit
AVR USART engine expects positive logic while Sun keyboard signal is negative. This converter uses software method for testing purpose. AVR UART engine will work better.
To use AVR UART engine you need exteral inverter in front of RX and TX pin.
Otherwise you can software serial routine to communicate the keyboard.
This converter uses software method, you doesn't need any inverter part.
Commands From System To Keyboard
0x01 Reset
Keyboard responds with following byte sequence:
Success: 0xFF 0x04 0x7F
Fail: 0x7E 0x01 0x7F
0x02 Bell On
0x03 Bell Off
0x0A Click On
0x0B Click Off
0x0E LED
followed by LED status byte:
bit: 3 2 1 0
LED: CapsLk ScrLk Compose NumLk
0x0F Layout
Keyboard responds with 'Layout Response' 0xFE 0xXX
Commands From Keyboard To System
0x7F Idle
means no keys pressed.
0xFE Layout Response
0xFF Reset Response(followed by 0x04)
Reference
http://kentie.net/article/sunkbd/page2.htm
http://kentie.net/article/sunkbd/KBD.pdf
Build Firmware Build Firmware
-------------- --------------
Just use 'make' Just use 'make'
$ cd sun_usb
$ cd pc98_usb
$ make $ make
Then, load the binary to MCU with your favorite programmer. Then, load the binary to MCU with your favorite programmer.
Other PC98 converter projects and resource
------------------------------------------
PC98 to USB
http://davy.nyacom.net/kbd98usb/
PC98 to PS/2
http://www.tsp.ne.jp/~sawada/mago/c_gka98at.htm
PC98 keyboard commands
http://www.webtech.co.jp/company/doc/undocumented_mem/io_kb.txt