mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-11-23 17:06:52 +06:00
Fix README of M0110
This commit is contained in:
tmk
parent
7e122279c5
commit
6cf6ddceb1
|
|
@ -1,10 +1,12 @@
|
|||
M0110/M0110A to USB keyboard converter
|
||||
======================================
|
||||
This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
|
||||
Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
|
||||
you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
|
||||
This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer.
|
||||
|
||||
Pics of **M0110 + M0120** and **M0110A**.
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
- M0110A support was contributed by [skagon@github](https://github.com/skagon).
|
||||
- M0120 also is supported. keys(+ * / and ,) on M0120 are recognized as cursor keys.
|
||||
|
|
@ -13,49 +15,42 @@ you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
|
|||
|
||||
Update
|
||||
------
|
||||
- 2013/08 Change port for signals PF to PD
|
||||
- 2013/08: Change port for signals `PF` to `PD`
|
||||
- 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now.
|
||||
|
||||
|
||||
|
||||
Connection
|
||||
----------
|
||||
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
|
||||
Teensy port `PD0` is assigned for `CLOCK` line and `PD1` for `DATA` by default,
|
||||
you can change pin configuration with editing *config.h*.
|
||||
Building Hardware
|
||||
-----------------
|
||||
You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`.
|
||||
|
||||
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
|
||||
while Macintosh keyboard cable is *straight*.
|
||||
[](http://i.imgur.com/4G2ZOeg.jpg)
|
||||
|
||||
[]
|
||||
### 4P4C phone handset cable
|
||||
Note that original cable used with Mac is **straight** while phone handset cable is **crossover**.
|
||||
|
||||
In this pic:
|
||||
<http://en.wikipedia.org/wiki/Modular_connector#4P4C>
|
||||
|
||||
1. `GND`(Black)
|
||||
2. `CLOCK`(Red)
|
||||
3. `DATA`(Green)
|
||||
4. `+5V`(Yellow)
|
||||
Close-up pic of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge.
|
||||
[](http://i.imgur.com/3S9P1mY.jpg?1)
|
||||
|
||||
Note that wire colors may vary in your cable.
|
||||
[Teensy]: http://www.pjrc.com/teensy/
|
||||
|
||||
|
||||
### Pinout
|
||||
### Socket Pinout
|
||||
- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
|
||||
- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
|
||||
|
||||
|
||||
|
||||
|
||||
### Pull-up Registor
|
||||
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
|
||||
when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
|
||||
In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
|
||||
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors.
|
||||
|
||||
|
||||
|
||||
Building Frimware
|
||||
-----------------
|
||||
To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
|
||||
You can edit *Makefile* and *config.h* to change compile options and pin configuration.
|
||||
To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration.
|
||||
|
||||
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
|
||||
$ cd m0110_usb
|
||||
|
|
@ -71,64 +66,69 @@ Keymap
|
|||
You can change keymaps by editing *keymap.c*.
|
||||
|
||||
### M0110 & M0120
|
||||
#### *Default*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| -|Lft|Rgt|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| Dn|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
|
||||
`---------------------------------------------------------' |-----------|Ent|
|
||||
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
|
||||
`-----------------------------------------------' `---------------'
|
||||
#### *HHKB/WASD Layer(WASD/IJKL)*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau|Ins| | 7| 8| 9| Up|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| Dn|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift |End| |PgD| | | |PgD| |End| |Shift | | 1| 2| 3| |
|
||||
`---------------------------------------------------------' |-----------|Ent|
|
||||
|Ctl|Alt | Space |Gui |Ctl| | 0| .| |
|
||||
`-----------------------------------------------' `---------------'
|
||||
#### *Default Layer*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -|Lft|Rgt|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| Dn|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| |
|
||||
`---------------------------------------------------------' |-----------|Ent|
|
||||
|Ctl|Gui | Space |Alt |Ctl| | 0| .| |
|
||||
`-----------------------------------------------' `---------------'
|
||||
|
||||
- `Space` and `Enter` also work as `Fn` layer switch key when holding down.
|
||||
|
||||
#### *Function Layer(WASD/HHKB)*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| | 7| 8| 9| Up|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| Dn|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| |
|
||||
`---------------------------------------------------------' |-----------|Ent|
|
||||
|Ctl|Gui | Space |Alt |Ctl| | 0| .| |
|
||||
`-----------------------------------------------' `---------------'
|
||||
|
||||
|
||||
### M0110A
|
||||
#### *Default*
|
||||
#### *Default Layer*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Ctl| =| /| *|
|
||||
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|
||||
|-----------------------------------------------------' | |---------------|
|
||||
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|
||||
|Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| |
|
||||
|---------------------------------------------------------| |-----------|Ent|
|
||||
|Alt |Gui | Space | \|Lft|Rgt| Dn| | 0| .| |
|
||||
|Ctrl |Gui | Space | \|Lft|Rgt|Dwn| | 0| .| |
|
||||
`---------------------------------------------------------' `---------------'
|
||||
#### *Cursor Layer(WASD/IJKL)*
|
||||
|
||||
- `Space` and `Enter` also work as `Fn` layer switch key when holding down.
|
||||
- `Backslash(\)` also works as `Alt` when holding down.
|
||||
|
||||
#### *Function Layer(WASD/HHKB)*
|
||||
,---------------------------------------------------------. ,---------------.
|
||||
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Caps |Hom| Up|PgU| | | |PgU| Up|Hom|Psc|Slk|Pau| | | 7| 8| 9| -|
|
||||
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -|
|
||||
|-----------------------------------------------------' | |---------------|
|
||||
|Fn0 |Lef|Dow|Rig| | | |Lef|Dow|Rig| | |Return| | 4| 5| 6| +|
|
||||
|Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +|
|
||||
|---------------------------------------------------------| |---------------|
|
||||
|Shift |End| |PgD| | | |PgD| |End| |Shif|PgU| | 1| 2| 3| |
|
||||
|Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| |
|
||||
|---------------------------------------------------------| |-----------|Ent|
|
||||
|Alt |Gui | Space |Ins|Hom|End|PgD| | 0| .| |
|
||||
|Ctrl |Gui | Space | \|Hom|End|PgD| | 0| .| |
|
||||
`---------------------------------------------------------' `---------------'
|
||||
|
||||
|
||||
|
||||
Debug
|
||||
-----
|
||||
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
|
||||
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `<Command>+H` simultaneously to get help.
|
||||
|
||||
The converter has some functions for debug, press `<magickey>+H` simultaneously to get help.
|
||||
These function is totally undocumented, tentative, inconsistent and buggy.
|
||||
|
||||
magickey: Shift+Option+Command(Shift+Alt+Gui or Shift+Alt+Control)
|
||||
- Command: `Shift+Option+Command`(`Shift+Alt+Gui` or `Shift+Alt+Control`)
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 48 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 49 KiB |
Loading…
Reference in New Issue
Block a user