diff --git a/keyboard/planck/backlight.c b/keyboard/planck/backlight.c
index d12dcf2386..ee7e31ee9c 100644
--- a/keyboard/planck/backlight.c
+++ b/keyboard/planck/backlight.c
@@ -5,42 +5,42 @@
 
 void backlight_init_ports()
 {
-	// Setup PB7 as output and output low.
-	DDRB |= (1<<7);
-	PORTB &= ~(1<<7);
-	
-	// Use full 16-bit resolution. 
-	ICR1 = 0xFFFF;
+    // Setup PB7 as output and output low.
+    DDRB |= (1<<7);
+    PORTB &= ~(1<<7);
+    
+    // Use full 16-bit resolution. 
+    ICR1 = 0xFFFF;
 
-	// I could write a wall of text here to explain... but TL;DW
-	// Go read the ATmega32u4 datasheet.
-	// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
-	
-	// Pin PB7 = OCR1C (Timer 1, Channel C)
-	// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
-	// (i.e. start high, go low when counter matches.)
-	// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
-	// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
-	
-	TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
-	TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
-	
-	// Default to zero duty cycle.
-	OCR1C = 0x0000;
+    // I could write a wall of text here to explain... but TL;DW
+    // Go read the ATmega32u4 datasheet.
+    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
+    
+    // Pin PB7 = OCR1C (Timer 1, Channel C)
+    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
+    // (i.e. start high, go low when counter matches.)
+    // WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
+    // Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
+    
+    TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
+    TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
+    
+    // Default to zero duty cycle.
+    OCR1C = 0x0000;
 }
 
 void backlight_set(uint8_t level)
 {
-	if ( level == 0 )
-	{
-		// Turn off PWM control on PB7, revert to output low.
-		TCCR1A &= ~(_BV(COM1C1));
-	}
-	else
-	{
-		// Turn on PWM control of PB7
-		TCCR1A |= _BV(COM1C1);
-		OCR1C = level << 12 | 0x0FFF;
-	}
+    if ( level == 0 )
+    {
+        // Turn off PWM control on PB7, revert to output low.
+        TCCR1A &= ~(_BV(COM1C1));
+    }
+    else
+    {
+        // Turn on PWM control of PB7
+        TCCR1A |= _BV(COM1C1);
+        OCR1C = level << 12 | 0x0FFF;
+    }
 }
 
diff --git a/keyboard/planck/keymap_wilba.c b/keyboard/planck/keymap_wilba.c
index 696fda42e3..9781f8fcd8 100644
--- a/keyboard/planck/keymap_wilba.c
+++ b/keyboard/planck/keymap_wilba.c
@@ -39,7 +39,7 @@ const uint16_t PROGMEM fn_actions[] = {
     [17] = ACTION_MODS_KEY(MOD_LSFT, KC_8), // *
     [18] = ACTION_MODS_KEY(MOD_LSFT, KC_9), // (
     [19] = ACTION_MODS_KEY(MOD_LSFT, KC_0), // )
-	
+    
     [20] = ACTION_MODS_KEY(MOD_LSFT, KC_MINS), // _
     [21] = ACTION_MODS_KEY(MOD_LSFT, KC_EQL), // +
     [22] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV), // ~
@@ -48,9 +48,9 @@ const uint16_t PROGMEM fn_actions[] = {
     [25] = ACTION_MODS_KEY(MOD_LSFT, KC_BSLS), // |
 
     [26] = ACTION_MODS_KEY(MOD_LSFT | MOD_RSFT, KC_PAUSE),
-	
-	[27] = ACTION_BACKLIGHT_TOGGLE(),
-	[28] = ACTION_BACKLIGHT_INCREASE(),
-	[29] = ACTION_BACKLIGHT_DECREASE()
-	
+    
+    [27] = ACTION_BACKLIGHT_TOGGLE(),
+    [28] = ACTION_BACKLIGHT_INCREASE(),
+    [29] = ACTION_BACKLIGHT_DECREASE()
+    
 };
diff --git a/keyboard/planck/led.c b/keyboard/planck/led.c
index 448df2ccfb..1f36434883 100644
--- a/keyboard/planck/led.c
+++ b/keyboard/planck/led.c
@@ -22,8 +22,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 void led_set(uint8_t usb_led)
 {
-	// Using PE6 Caps Lock LED
-	if (usb_led & (1<<USB_LED_CAPS_LOCK))
+    // Using PE6 Caps Lock LED
+    if (usb_led & (1<<USB_LED_CAPS_LOCK))
     {
         // Output high.
         DDRE |= (1<<6);
diff --git a/keyboard/planck/matrix.c b/keyboard/planck/matrix.c
index 8cd9ac85b6..e3926caece 100644
--- a/keyboard/planck/matrix.c
+++ b/keyboard/planck/matrix.c
@@ -62,9 +62,9 @@ void matrix_init(void)
     MCUCR |= (1<<JTD);
     MCUCR |= (1<<JTD);
 
-	// TODO fix this dependency 
-	backlight_init_ports();
-	
+    // TODO fix this dependency 
+    backlight_init_ports();
+    
     // initialize row and col
     unselect_rows();
     init_cols();