Mouse keys is a feature that allows you to emulate a mouse using your keyboard. You can move the pointer at different speeds, press 5 buttons and scroll in 8 directions.
* **Combined:** Holding movement keys accelerates the cursor until it reaches its maximum speed, but holding acceleration and movement keys simultaneously moves the cursor at constant speeds.
* **Inertia:** Cursor accelerates when key held, and decelerates after key release. Tracks X and Y velocity separately for more nuanced movements. Applies to cursor only, not scrolling.
Configuration options that are times, intervals or delays are given in milliseconds. Scroll speed is given as multiples of the default scroll step. For example, a scroll speed of 8 means that each scroll action covers 8 times the length of the default scroll step as defined by your operating system or application.
* Setting `MOUSEKEY_DELAY` too low makes the cursor unresponsive. Setting it too high makes small movements difficult.
* For smoother cursor movements, lower the value of `MOUSEKEY_INTERVAL`. If the refresh rate of your display is 60Hz, you could set it to `16` (1/60). As this raises the cursor speed significantly, you may want to lower `MOUSEKEY_MAX_SPEED`.
* Setting `MOUSEKEY_TIME_TO_MAX` or `MOUSEKEY_WHEEL_TIME_TO_MAX` to `0` will disable acceleration for the cursor or scrolling respectively. This way you can make one of them constant while keeping the other accelerated, which is not possible in constant speed mode.
* Setting `MOUSEKEY_WHEEL_INTERVAL` too low will make scrolling too fast. Setting it too high will make scrolling too slow when the wheel key is held down.
Cursor acceleration uses the same algorithm as the X Window System MouseKeysAccel feature. You can read more about it [on Wikipedia](https://en.wikipedia.org/wiki/Mouse_keys).
This is an extension of the accelerated mode. The kinetic mode uses a quadratic curve on the cursor speed which allows precise movements at the beginning and allows to cover large distances by increasing cursor speed quickly thereafter. You can adjust the cursor and scrolling acceleration using the following settings in your keymap’s `config.h` file:
* The smoothness of the cursor movement depends on the `MOUSEKEY_INTERVAL` setting. The shorter the interval is set the smoother the movement will be. Setting the value too low makes the cursor unresponsive. Lower settings are possible if the micro processor is fast enough. For example: At an interval of `8` milliseconds, `125` movements per second will be initiated. With a base speed of `1000` each movement will move the cursor by `8` pixels.
* Mouse wheel movements are implemented differently from cursor movements. While it's okay for the cursor to move multiple pixels at once for the mouse wheel this would lead to jerky movements. Instead, the mouse wheel operates at step size `1`. Setting mouse wheel speed is done by adjusting the number of wheel movements per second.
In this mode you can define multiple different speeds for both the cursor and the mouse wheel. There is no acceleration. `MS_ACL0`, `MS_ACL1` and `MS_ACL2` change the cursor and scroll speed to their respective setting.
* **Momentary:** The chosen speed is only active while you hold the respective key. When the key is raised, mouse keys returns to the unmodified speed.
* **Tap-to-select:** The chosen speed is activated when you press the respective key and remains active even after the key has been raised. The default speed is that of `MS_ACL1`. There is no unmodified speed.
|`MOUSEKEY_DELAY` |150 |Delay between pressing a movement key and cursor movement |
|`MOUSEKEY_INTERVAL` |16 |Time between cursor movements in milliseconds (16 = 60fps) |
|`MOUSEKEY_MAX_SPEED` |32 |Maximum cursor speed at which acceleration stops |
|`MOUSEKEY_TIME_TO_MAX` |32 |Number of frames until maximum cursor speed is reached |
|`MOUSEKEY_FRICTION` |24 |How quickly the cursor stops after releasing a key |
|`MOUSEKEY_MOVE_DELTA` |1 |How much to move on first frame (1 strongly recommended) |
Tips:
* Set `MOUSEKEY_DELAY` to roughly the same value as your host computer's key repeat delay, in ms. Recommended values are 100 to 300.
* Set `MOUSEKEY_INTERVAL` to a value of 1000 / your monitor's FPS. For 60 FPS, 1000/60 = 16.
* Set `MOUSEKEY_MAX_SPEED` based on your screen resolution and refresh rate, like Width / FPS. For example, 1920 pixels / 60 FPS = 32 pixels per frame.
* Set `MOUSEKEY_TIME_TO_MAX` to a value of approximately FPS / 2, to make it reach full speed in half a second (or so).
* Set `MOUSEKEY_FRICTION` to something between 1 and 255. Lower makes the cursor glide longer. Values from 8 to 40 are the most effective.
* Keep `MOUSEKEY_MOVE_DELTA` at 1. This allows precise movements before the gliding effect starts.
* Mouse wheel options are the same as the default accelerated mode, and do not use inertia.
Mouse keys button state is shared with [PS/2 mouse](ps2_mouse) and [pointing device](pointing_device) so mouse keys button presses can be used for clicks and drags.
