keychron_qmk_firmware/keyboards/rgbkb/pan/rules.mk

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = lite     # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no        # Mouse keys
EXTRAKEY_ENABLE = yes       # Audio control and System control
CONSOLE_ENABLE = no         # Console for debug
COMMAND_ENABLE = no         # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no            # USB Nkey Rollover
BLUETOOTH_ENABLE = no       # Enable Bluetooth
AUDIO_ENABLE = no           # Audio output
RGB_MATRIX_ENABLE = WS2812
WS2812_DRIVER = bitbang
ENCODER_ENABLE = yes
OLED_DRIVER_ENABLE = yes

# RGB layout selection
RGB_ENCODERS = yes # For RGB encoders, solder on both WS2811 chips
STAGGERED_LAYOUT = no # If you soldered R1-A12 and R4-A12, enable this.

# Default to revision 1
DEFAULT_FOLDER = rgbkb/pan/rev1
[Keyboard] RGBKB Pan (#9587) * Add new keyboard Pan Encoder switches still need work * New keyboard Pan Should be complete * Split MCU selection into 2 revision folders * [rgbkb/pan] Make requested changes for PR Additionally, set DEFAULT_FOLDER to rev1, and default rev1 to atmega32a (as all shipped kits include an atmega32a) * Apply suggestions from code review * Fix default keymap typo * add usb max power define * Commit suggested changes * Update keyboards/rgbkb/pan/config.h * Apply suggestions from code review Small copyright updates * Apply suggestions from code review 2020-11-10 12:22:22 +06:00			`# Build Options`
			`# change yes to no to disable`
			`#`
			`BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration`
			`MOUSEKEY_ENABLE = no # Mouse keys`
			`EXTRAKEY_ENABLE = yes # Audio control and System control`
			`CONSOLE_ENABLE = no # Console for debug`
			`COMMAND_ENABLE = no # Commands for debug and configuration`
			`# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE`
			`SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend`
			`# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work`
			`NKRO_ENABLE = no # USB Nkey Rollover`
			`BLUETOOTH_ENABLE = no # Enable Bluetooth`
			`AUDIO_ENABLE = no # Audio output`
			`RGB_MATRIX_ENABLE = WS2812`
			`WS2812_DRIVER = bitbang`
			`ENCODER_ENABLE = yes`
			`OLED_DRIVER_ENABLE = yes`

			`# RGB layout selection`
			`RGB_ENCODERS = yes # For RGB encoders, solder on both WS2811 chips`
			`STAGGERED_LAYOUT = no # If you soldered R1-A12 and R4-A12, enable this.`

			`# Default to revision 1`
			`DEFAULT_FOLDER = rgbkb/pan/rev1`