mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-13 05:38:51 +06:00
62 lines
2.0 KiB
Markdown
62 lines
2.0 KiB
Markdown
|
ps2avrGB keyboard firmware
|
||
|
|
==========================
|
||
|
|
|
||
|
|
This is a port of the QMK firmware for boards that are based on the
|
||
|
|
ps2avrGB firmware, like the [ps2avrGB
|
||
|
|
keyboard](https://www.keyclack.com/product/gb-ps2avrgb/) or the ones sold
|
||
|
|
by [Winkeyless](http://winkeyless.kr/product/ps2avrgb-parts/).
|
||
|
|
|
||
|
|
Note that this is a complete replacement for the firmware, so you won't be
|
||
|
|
using Bootmapper Client to change any keyboard settings, since not all the
|
||
|
|
USB report options are supported.
|
||
|
|
|
||
|
|
## Supported Boards
|
||
|
|
|
||
|
|
Only the [B.mini X2](http://winkeyless.kr/product/b-mini-x2-pcb/) has been
|
||
|
|
tested so far (since it's the only one I own). But other boards that use
|
||
|
|
the ps2avrGB firmware should work as well.
|
||
|
|
|
||
|
|
## Installing
|
||
|
|
|
||
|
|
First, install the requirements. These commands are for OSX, but all you
|
||
|
|
need is the AVR toolchain and `bootloadHID` for flashing:
|
||
|
|
|
||
|
|
```
|
||
|
|
$ brew cask install crosspack-avr
|
||
|
|
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
||
|
|
```
|
||
|
|
|
||
|
|
In order to use the `./program` script, which can reboot the board into
|
||
|
|
the bootloader, you'll need Python 2 with PyUSB installed:
|
||
|
|
|
||
|
|
```
|
||
|
|
$ pip install pyusb
|
||
|
|
```
|
||
|
|
|
||
|
|
Then, with the keyboard plugged in, simply run this command from the
|
||
|
|
`qmk_firmware` directory:
|
||
|
|
|
||
|
|
```
|
||
|
|
$ make ps2avrGB-program
|
||
|
|
```
|
||
|
|
|
||
|
|
If you prefer, you can just build it and flash the firmware directly with
|
||
|
|
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
|
||
|
|
in the bootloader:
|
||
|
|
|
||
|
|
```
|
||
|
|
$ make ps2avrGB
|
||
|
|
$ bootloadHID -r ps2avrGB_default.hex
|
||
|
|
```
|
||
|
|
|
||
|
|
## Troubleshooting
|
||
|
|
|
||
|
|
From my experience, it's really hard to brick these boards. But these
|
||
|
|
tricks have been useful when it got stuck in a weird scenario.
|
||
|
|
|
||
|
|
1. Try plugging the board in while pressing `L_Ctrl`. This will force it
|
||
|
|
to boot only the bootloader without loading the firmware. Once this is
|
||
|
|
done, just reflash the board with the original firmware.
|
||
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly
|
||
|
|
to your computer or plugging/unplugging the USB hub.
|