mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-01 13:16:50 +06:00
34 lines
1.7 KiB
Markdown
34 lines
1.7 KiB
Markdown
|
# Ejectix
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
Ejectix is a 36-key, low-staggered keyboard.
|
||
|
|
Its layout is similar to that of a conventional keyboard, making it suitable for an introductory keyboard of 30% size.
|
||
|
|
Its relatively simple structure makes it easy to assemble, and it is recommended for those who are just starting to build their own keyboards.
|
||
|
|
Since the firmware is VIA-compatible, it is possible to write the firmware and change the keymap from a web browser by using Remap.
|
||
|
|
The MX socket is also supported, making it easy to replace the keyswitch for long-lasting use.
|
||
|
|
Underglow LEDs can also be used to decorate your desk.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany)
|
||
|
|
* Hardware Supported: Ejectix PCB, Pro Micro
|
||
|
|
* Hardware Availability: https://github.com/takashicompany/ejectix
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make takashicompany/ejectix:default
|
||
|
|
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make takashicompany/ejectix:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|