keychron_qmk_firmware/keyboard/ghost_squid/README.md

The Ghost Squid controller
==========================
Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.

*Note that this is not the official firmware*

Build
-----
Move to this directory then just run `make` like:

    $ make -f Makefile.lufa

At the moment only the LUFA stack is supported.


Bootloader
---------
To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.

It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.
Added support for The Ghost Squid controller used for CM XT keyboard. - initial commit - created as clone of the kitten_paw subproject with pins adjusted for CM XT 2014-12-28 14:49:57 +06:00			`The Ghost Squid controller`
			`==========================`
			`Custom controller for the Cooler Master QuickFire XT keyboard designed by bpiphany.`

			`Note that this is not the official firmware`

			`Build`
			`-----`
			Move to this directory then just run `make` like:

			`$ make -f Makefile.lufa`

			`At the moment only the LUFA stack is supported.`


			`Bootloader`
			`---------`
			`To enter bootloader by hardware use a magnet above the controller before connecting the usb cable.`

			`It is still possible to use Boot Magic and Command (LSFT+RSFT+PAUS) to access the bootloader though.`