mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-11 20:58:15 +06:00
37 lines
1.4 KiB
Markdown
37 lines
1.4 KiB
Markdown
|
# Brickbots keymap for plaid
|
||
|
Original copyright 2019 Takuya Urakawa (dm9records.com)
|
||
|
LED Support added by Richard Sutherland (rich@brickbots.com)
|
||
|
|
||
|
This layout is based on the Planck layout, with esc/tab swapped and an extra
|
||
|
ctrl key in the bottom left corner. It includes an adjust layer (6)
|
||
|
accessible by holding the lower and raise modifiers (MO3 and MO4) together.
|
||
|
The adjustment layer is used to set the behavior of the two LEDs:
|
||
|
|
||
|
**Modifier Mode:**
|
||
|
Activates when any modifier (shift, alt, os, MO) key is held
|
||
|
down. LED turns off when key is release
|
||
|
|
||
|
**Blinkinlights Mode:**
|
||
|
Random chance of state change on each keystroke.
|
||
|
|
||
|
**Keypress Mode:**
|
||
|
On for any keypress as long as the key is pressed
|
||
|
|
||
|
**Carriage Mode:**
|
||
|
Turns on when enter is pressed, turns off when any next key is pressed
|
||
|
|
||
|
To set the behavior of an LED, and save it to eeprom, hold the
|
||
|
raise/lower keys together to access the adjust layer, then use
|
||
|
the keys indicated below to set the behaviors
|
||
|
|
||
|
* q = Toggle Red LED state, deactivates any other modes
|
||
|
* w = Toggle Green LED state, deactivates any other modes
|
||
|
* e = Set RED LED to modifier mode
|
||
|
* r = Set GREEN LED to modifier mode
|
||
|
* t = Set RED LED to Blinkinlights mode
|
||
|
* y = set GREEN LED to Blinkinlights mode
|
||
|
* u = set RED LED to Keypress mode
|
||
|
* i = set GREEN LED to Keypress mode
|
||
|
* o = set RED LED to Carriage mode
|
||
|
* p = set GREEN LED to Carriage mode
|