mirror of
https://github.com/Keychron/qmk_firmware.git
synced 2024-12-01 21:26:55 +06:00
32 lines
1.4 KiB
Markdown
32 lines
1.4 KiB
Markdown
|
# Sweeq
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
*Sweeq is a Ferris Sweep clone that uses diodes, instead of the latter's direct pin matrix.*
|
||
|
|
|
||
|
|
The primary goal is to free up the SDA/SCL pins so they can be used by auxiliary devices such as a trackball, trackpoint or an OLED screen.
|
||
|
|
|
||
|
|
Other than the diode changes and the ability to use hotswap sockets, this keyboard is identical to the original Sweep.
|
||
|
|
|
||
|
|
* Keyboard Maintainer: [@idank](https://github.com/idank)
|
||
|
|
* Hardware Supported: [sweeq](https://github.com/idank/keyboards/tree/main/sweeq)
|
||
|
|
* Hardware Availability: *[holykeebs](https://holykeebs.com)*
|
||
|
|
|
||
|
|
Make example for this keyboard (after setting up your build environment):
|
||
|
|
|
||
|
|
make idank/sweeq:default
|
||
|
|
|
||
|
|
Flashing example for this keyboard:
|
||
|
|
|
||
|
|
make idank/sweeq:default:flash
|
||
|
|
|
||
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
|
|
||
|
|
## Bootloader
|
||
|
|
|
||
|
|
Enter the bootloader in 3 ways:
|
||
|
|
|
||
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
|
||
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|