keychron_qmk_firmware/keyboards/moonlander/rules.mk

# MCU name
MCU = STM32F303

# Bootloader selection
BOOTLOADER = stm32-dfu

# Build Options
#   change yes to no to disable
#
BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
MOUSEKEY_ENABLE = yes       # Mouse keys
EXTRAKEY_ENABLE = yes       # Audio control and System control
CONSOLE_ENABLE = yes        # Console for debug
COMMAND_ENABLE = yes        # Commands for debug and configuration
NKRO_ENABLE = yes           # Enable N-Key Rollover
BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
AUDIO_ENABLE = yes          # Audio output
AUDIO_DRIVER = dac_additive
CUSTOM_MATRIX = lite
SWAP_HANDS_ENABLE = yes
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = IS31FL3731
EEPROM_DRIVER = i2c

#project specific files
SRC += matrix.c
QUANTUM_LIB_SRC += i2c_master.c

MOUSE_SHARED_EP = no
[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`# MCU name`
			`MCU = STM32F303`

Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) * Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules 2021-06-08 15:48:46 +06:00			`# Bootloader selection`
			`BOOTLOADER = stm32-dfu`

[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`# Build Options`
			`# change yes to no to disable`
			`#`
[Keyboard] Move Moonlander off 'Proton C' board (#14478) 2021-09-18 02:00:42 +06:00			`BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite`
[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`MOUSEKEY_ENABLE = yes # Mouse keys`
			`EXTRAKEY_ENABLE = yes # Audio control and System control`
			`CONSOLE_ENABLE = yes # Console for debug`
			`COMMAND_ENABLE = yes # Commands for debug and configuration`
Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 11:05:44 +06:00			`NKRO_ENABLE = yes # Enable N-Key Rollover`
[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality`
			`RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow`
			`AUDIO_ENABLE = yes # Audio output`
[Keyboard] Update to ZSA Keyboards (#15644) 2021-12-29 20:14:48 +06:00			`AUDIO_DRIVER = dac_additive`
[Keyboard] Convert ZSA's Moonlander keyboard to matrix lite (#14667) 2021-10-02 06:13:15 +06:00			`CUSTOM_MATRIX = lite`
[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`SWAP_HANDS_ENABLE = yes`
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change 2020-11-29 02:02:18 +06:00			`RGB_MATRIX_ENABLE = yes`
			`RGB_MATRIX_DRIVER = IS31FL3731`
[Keyboard] Add ZSA Moonlander (#9853) 2020-08-22 20:44:42 +06:00			`EEPROM_DRIVER = i2c`

			`#project specific files`
			`SRC += matrix.c`
			`QUANTUM_LIB_SRC += i2c_master.c`
[Keyboard] Update to ZSA Keyboards (#15644) 2021-12-29 20:14:48 +06:00
			`MOUSE_SHARED_EP = no`