2017-03-29 04:20:36 +06:00
/* Copyright 2016-2017 Jack Humbert
*
* This program is free software : you can redistribute it and / or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation , either version 2 of the License , or
* ( at your option ) any later version .
*
* This program is distributed in the hope that it will be useful ,
* but WITHOUT ANY WARRANTY ; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
* GNU General Public License for more details .
*
* You should have received a copy of the GNU General Public License
* along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
2016-05-15 10:27:32 +06:00
# include "quantum.h"
2019-01-10 09:04:01 +06:00
# if !defined(RGBLIGHT_ENABLE) && !defined(RGB_MATRIX_ENABLE)
# include "rgb.h"
# endif
2017-02-01 21:30:06 +06:00
# ifdef PROTOCOL_LUFA
2017-02-01 14:35:21 +06:00
# include "outputselect.h"
2017-02-01 18:37:52 +06:00
# endif
2016-05-15 10:27:32 +06:00
2018-01-02 04:47:51 +06:00
# ifndef BREATHING_PERIOD
# define BREATHING_PERIOD 6
# endif
2017-02-12 22:29:42 +06:00
# include "backlight.h"
extern backlight_config_t backlight_config ;
2017-02-19 11:11:55 +06:00
2017-02-13 13:55:35 +06:00
# ifdef FAUXCLICKY_ENABLE
# include "fauxclicky.h"
# endif
2017-02-12 22:29:42 +06:00
2018-02-09 02:07:46 +06:00
# ifdef API_ENABLE
# include "api.h"
# endif
# ifdef MIDI_ENABLE
# include "process_midi.h"
# endif
2019-02-21 21:22:46 +06:00
# ifdef VELOCIKEY_ENABLE
# include "velocikey.h"
# endif
2019-02-17 08:39:30 +06:00
# ifdef HAPTIC_ENABLE
# include "haptic.h"
# endif
2018-10-27 02:19:23 +06:00
# ifdef ENCODER_ENABLE
# include "encoder.h"
# endif
2017-07-21 09:57:11 +06:00
# ifdef AUDIO_ENABLE
# ifndef GOODBYE_SONG
# define GOODBYE_SONG SONG(GOODBYE_SOUND)
# endif
# ifndef AG_NORM_SONG
# define AG_NORM_SONG SONG(AG_NORM_SOUND)
# endif
# ifndef AG_SWAP_SONG
# define AG_SWAP_SONG SONG(AG_SWAP_SOUND)
# endif
float goodbye_song [ ] [ 2 ] = GOODBYE_SONG ;
float ag_norm_song [ ] [ 2 ] = AG_NORM_SONG ;
float ag_swap_song [ ] [ 2 ] = AG_SWAP_SONG ;
2017-08-11 02:52:24 +06:00
# ifdef DEFAULT_LAYER_SONGS
float default_layer_songs [ ] [ 16 ] [ 2 ] = DEFAULT_LAYER_SONGS ;
# endif
2017-07-21 09:57:11 +06:00
# endif
2016-08-18 15:29:53 +06:00
static void do_code16 ( uint16_t code , void ( * f ) ( uint8_t ) ) {
switch ( code ) {
case QK_MODS . . . QK_MODS_MAX :
break ;
default :
return ;
}
if ( code & QK_LCTL )
f ( KC_LCTL ) ;
if ( code & QK_LSFT )
f ( KC_LSFT ) ;
if ( code & QK_LALT )
f ( KC_LALT ) ;
if ( code & QK_LGUI )
f ( KC_LGUI ) ;
2016-12-24 01:51:11 +06:00
if ( code < QK_RMODS_MIN ) return ;
2016-08-18 15:29:53 +06:00
if ( code & QK_RCTL )
f ( KC_RCTL ) ;
if ( code & QK_RSFT )
f ( KC_RSFT ) ;
if ( code & QK_RALT )
f ( KC_RALT ) ;
if ( code & QK_RGUI )
f ( KC_RGUI ) ;
}
2017-01-29 23:06:24 +06:00
static inline void qk_register_weak_mods ( uint8_t kc ) {
add_weak_mods ( MOD_BIT ( kc ) ) ;
send_keyboard_report ( ) ;
}
static inline void qk_unregister_weak_mods ( uint8_t kc ) {
del_weak_mods ( MOD_BIT ( kc ) ) ;
send_keyboard_report ( ) ;
}
2017-01-21 13:01:55 +06:00
static inline void qk_register_mods ( uint8_t kc ) {
2017-01-29 23:06:24 +06:00
add_weak_mods ( MOD_BIT ( kc ) ) ;
send_keyboard_report ( ) ;
2017-01-21 13:01:55 +06:00
}
static inline void qk_unregister_mods ( uint8_t kc ) {
2017-01-29 23:06:24 +06:00
del_weak_mods ( MOD_BIT ( kc ) ) ;
send_keyboard_report ( ) ;
2017-01-21 13:01:55 +06:00
}
2016-08-18 15:29:53 +06:00
void register_code16 ( uint16_t code ) {
2017-01-29 23:06:24 +06:00
if ( IS_MOD ( code ) | | code = = KC_NO ) {
do_code16 ( code , qk_register_mods ) ;
} else {
do_code16 ( code , qk_register_weak_mods ) ;
}
2016-08-18 15:29:53 +06:00
register_code ( code ) ;
}
void unregister_code16 ( uint16_t code ) {
unregister_code ( code ) ;
2017-01-29 23:06:24 +06:00
if ( IS_MOD ( code ) | | code = = KC_NO ) {
do_code16 ( code , qk_unregister_mods ) ;
} else {
do_code16 ( code , qk_unregister_weak_mods ) ;
}
2016-08-18 15:29:53 +06:00
}
2018-12-14 23:01:58 +06:00
void tap_code16 ( uint16_t code ) {
register_code16 ( code ) ;
# if TAP_CODE_DELAY > 0
wait_ms ( TAP_CODE_DELAY ) ;
# endif
unregister_code16 ( code ) ;
}
2016-05-15 10:27:32 +06:00
__attribute__ ( ( weak ) )
bool process_action_kb ( keyrecord_t * record ) {
return true ;
}
2016-05-29 01:22:30 +06:00
__attribute__ ( ( weak ) )
bool process_record_kb ( uint16_t keycode , keyrecord_t * record ) {
return process_record_user ( keycode , record ) ;
}
__attribute__ ( ( weak ) )
bool process_record_user ( uint16_t keycode , keyrecord_t * record ) {
return true ;
}
2016-07-13 20:38:02 +06:00
void reset_keyboard ( void ) {
clear_keyboard ( ) ;
2017-12-10 22:54:36 +06:00
# if defined(MIDI_ENABLE) && defined(MIDI_BASIC)
process_midi_all_notes_off ( ) ;
2018-01-19 03:02:32 +06:00
# endif
2018-07-30 10:24:42 +06:00
# ifdef AUDIO_ENABLE
# ifndef NO_MUSIC_MODE
music_all_notes_off ( ) ;
# endif
2017-07-21 09:57:11 +06:00
uint16_t timer_start = timer_read ( ) ;
PLAY_SONG ( goodbye_song ) ;
2016-07-13 20:38:02 +06:00
shutdown_user ( ) ;
2018-01-19 03:02:32 +06:00
while ( timer_elapsed ( timer_start ) < 250 )
2017-07-21 09:57:11 +06:00
wait_ms ( 1 ) ;
stop_all_notes ( ) ;
# else
2018-08-01 09:20:29 +06:00
shutdown_user ( ) ;
2016-07-13 20:38:02 +06:00
wait_ms ( 250 ) ;
2017-07-21 09:57:11 +06:00
# endif
2019-02-17 08:39:30 +06:00
# ifdef HAPTIC_ENABLE
haptic_shutdown ( ) ;
# endif
2017-11-28 10:08:21 +06:00
// this is also done later in bootloader.c - not sure if it's neccesary here
# ifdef BOOTLOADER_CATERINA
2016-07-13 20:38:02 +06:00
* ( uint16_t * ) 0x0800 = 0x7777 ; // these two are a-star-specific
# endif
bootloader_jump ( ) ;
}
2017-08-12 15:57:42 +06:00
/* true if the last press of GRAVE_ESC was shifted (i.e. GUI or SHIFT were pressed), false otherwise.
* Used to ensure that the correct keycode is released if the key is released .
*/
static bool grave_esc_was_shifted = false ;
2019-04-06 01:47:25 +06:00
/* Convert record into usable keycode via the contained event. */
uint16_t get_record_keycode ( keyrecord_t * record ) {
return get_event_keycode ( record - > event ) ;
}
2016-05-15 10:27:32 +06:00
2019-04-06 01:47:25 +06:00
/* Convert event into usable keycode. Checks the layer cache to ensure that it
* retains the correct keycode after a layer change , if the key is still pressed .
*/
uint16_t get_event_keycode ( keyevent_t event ) {
2016-05-15 10:27:32 +06:00
2018-09-17 23:48:02 +06:00
# if !defined(NO_ACTION_LAYER) && !defined(STRICT_LAYER_RELEASE)
2016-08-18 05:34:05 +06:00
/* TODO: Use store_or_get_action() or a similar function. */
if ( ! disable_action_cache ) {
uint8_t layer ;
2016-05-15 10:27:32 +06:00
2019-04-06 01:47:25 +06:00
if ( event . pressed ) {
layer = layer_switch_get_layer ( event . key ) ;
update_source_layers_cache ( event . key , layer ) ;
2016-08-18 05:34:05 +06:00
} else {
2019-04-06 01:47:25 +06:00
layer = read_source_layers_cache ( event . key ) ;
2016-08-18 05:34:05 +06:00
}
2019-04-06 01:47:25 +06:00
return keymap_key_to_keycode ( layer , event . key ) ;
2016-08-18 05:34:05 +06:00
} else
2016-05-15 10:27:32 +06:00
# endif
2019-04-06 01:47:25 +06:00
return keymap_key_to_keycode ( layer_switch_get_layer ( event . key ) , event . key ) ;
}
/* Main keycode processing function. Hands off handling to other functions,
* then processes internal Quantum keycodes , then processes ACTIONs .
*/
bool process_record_quantum ( keyrecord_t * record ) {
uint16_t keycode = get_record_keycode ( record ) ;
2016-05-15 10:27:32 +06:00
2016-05-15 10:47:25 +06:00
// This is how you use actions here
// if (keycode == KC_LEAD) {
// action_t action;
// action.code = ACTION_DEFAULT_LAYER_SET(0);
// process_action(record, action);
// return false;
// }
2019-02-21 21:22:46 +06:00
# ifdef VELOCIKEY_ENABLE
if ( velocikey_enabled ( ) & & record - > event . pressed ) { velocikey_accelerate ( ) ; }
# endif
2018-02-05 00:45:19 +06:00
# ifdef TAP_DANCE_ENABLE
preprocess_tap_dance ( keycode , record ) ;
# endif
2019-04-16 09:32:57 +06:00
# if defined(OLED_DRIVER_ENABLE) && !defined(OLED_DISABLE_TIMEOUT)
// Wake up oled if user is using those fabulous keys!
if ( record - > event . pressed )
oled_on ( ) ;
# endif
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
if ( ! (
2017-08-06 14:50:20 +06:00
# if defined(KEY_LOCK_ENABLE)
// Must run first to be able to mask key_up events.
2017-08-07 03:14:27 +06:00
process_key_lock ( & keycode , record ) & &
2017-08-06 14:50:20 +06:00
# endif
2018-04-21 22:30:10 +06:00
# if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY)
2018-12-19 22:39:24 +06:00
process_clicky ( keycode , record ) & &
2018-04-21 22:30:10 +06:00
# endif //AUDIO_CLICKY
2019-02-17 08:39:30 +06:00
# ifdef HAPTIC_ENABLE
process_haptic ( keycode , record ) & &
# endif //HAPTIC_ENABLE
2019-04-03 06:24:14 +06:00
# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_KEYREACTIVE_ENABLED)
2018-05-09 01:24:18 +06:00
process_rgb_matrix ( keycode , record ) & &
# endif
2019-04-03 06:24:14 +06:00
process_record_kb ( keycode , record ) & &
2017-02-26 05:02:43 +06:00
# if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
process_midi ( keycode , record ) & &
2016-05-15 10:51:06 +06:00
# endif
2016-05-15 10:27:32 +06:00
# ifdef AUDIO_ENABLE
2017-02-26 09:25:33 +06:00
process_audio ( keycode , record ) & &
# endif
2017-07-27 03:41:39 +06:00
# ifdef STENO_ENABLE
process_steno ( keycode , record ) & &
# endif
2018-12-19 22:39:24 +06:00
# if (defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))) && !defined(NO_MUSIC_MODE)
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
process_music ( keycode , record ) & &
2016-05-15 10:27:32 +06:00
# endif
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
# ifdef TAP_DANCE_ENABLE
process_tap_dance ( keycode , record ) & &
# endif
2018-12-19 22:39:24 +06:00
# if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)
process_unicode_common ( keycode , record ) & &
# endif
2018-09-17 23:48:02 +06:00
# ifdef LEADER_ENABLE
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
process_leader ( keycode , record ) & &
# endif
2016-12-17 02:00:29 +06:00
# ifdef COMBO_ENABLE
process_combo ( keycode , record ) & &
# endif
2016-10-17 02:03:33 +06:00
# ifdef PRINTING_ENABLE
process_printer ( keycode , record ) & &
2016-11-14 10:02:38 +06:00
# endif
2017-09-17 11:33:28 +06:00
# ifdef AUTO_SHIFT_ENABLE
process_auto_shift ( keycode , record ) & &
# endif
2017-09-12 10:43:10 +06:00
# ifdef TERMINAL_ENABLE
process_terminal ( keycode , record ) & &
2019-04-30 09:21:46 +06:00
# endif
# ifdef SPACE_CADET_ENABLE
process_space_cadet ( keycode , record ) & &
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
# endif
true ) ) {
return false ;
2016-05-19 09:47:16 +06:00
}
2016-06-18 07:42:59 +06:00
// Shift / paren setup
2016-05-25 09:27:59 +06:00
switch ( keycode ) {
2016-06-19 00:30:24 +06:00
case RESET :
if ( record - > event . pressed ) {
2016-07-13 20:38:02 +06:00
reset_keyboard ( ) ;
2016-06-19 00:30:24 +06:00
}
2017-09-07 03:49:19 +06:00
return false ;
2016-06-19 00:30:24 +06:00
case DEBUG :
if ( record - > event . pressed ) {
debug_enable = true ;
2017-09-06 22:19:40 +06:00
print ( " DEBUG: enabled. \n " ) ;
2016-06-19 00:30:24 +06:00
}
2017-09-07 03:49:19 +06:00
return false ;
2018-11-06 11:38:18 +06:00
case EEPROM_RESET :
if ( record - > event . pressed ) {
eeconfig_init ( ) ;
}
return false ;
2017-02-13 13:55:35 +06:00
# ifdef FAUXCLICKY_ENABLE
case FC_TOG :
if ( record - > event . pressed ) {
FAUXCLICKY_TOGGLE ;
}
return false ;
case FC_ON :
if ( record - > event . pressed ) {
FAUXCLICKY_ON ;
}
return false ;
case FC_OFF :
if ( record - > event . pressed ) {
FAUXCLICKY_OFF ;
}
return false ;
# endif
2018-05-09 01:24:18 +06:00
# if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
2017-09-07 03:49:19 +06:00
case RGB_TOG :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_toggle ( ) ;
}
return false ;
2017-12-05 00:36:24 +06:00
case RGB_MODE_FORWARD :
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2017-12-05 00:36:24 +06:00
uint8_t shifted = get_mods ( ) & ( MOD_BIT ( KC_LSHIFT ) | MOD_BIT ( KC_RSHIFT ) ) ;
if ( shifted ) {
rgblight_step_reverse ( ) ;
}
else {
rgblight_step ( ) ;
}
2017-09-07 03:49:19 +06:00
}
return false ;
2017-12-05 00:36:24 +06:00
case RGB_MODE_REVERSE :
2017-10-25 03:17:47 +06:00
if ( record - > event . pressed ) {
uint8_t shifted = get_mods ( ) & ( MOD_BIT ( KC_LSHIFT ) | MOD_BIT ( KC_RSHIFT ) ) ;
if ( shifted ) {
2017-12-05 00:36:24 +06:00
rgblight_step ( ) ;
2017-10-25 03:17:47 +06:00
}
else {
2017-12-05 00:36:24 +06:00
rgblight_step_reverse ( ) ;
2017-10-25 03:17:47 +06:00
}
}
return false ;
2017-09-07 03:49:19 +06:00
case RGB_HUI :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_increase_hue ( ) ;
}
return false ;
case RGB_HUD :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_decrease_hue ( ) ;
}
return false ;
case RGB_SAI :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_increase_sat ( ) ;
}
return false ;
case RGB_SAD :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_decrease_sat ( ) ;
}
return false ;
case RGB_VAI :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_increase_val ( ) ;
}
return false ;
case RGB_VAD :
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
// Split keyboards need to trigger on key-up for edge-case issue
# ifndef SPLIT_KEYBOARD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
Lets split eh (#3120)
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-17 08:25:02 +06:00
# else
if ( ! record - > event . pressed ) {
# endif
2017-09-07 03:49:19 +06:00
rgblight_decrease_val ( ) ;
}
return false ;
2018-05-09 09:23:21 +06:00
case RGB_SPI :
if ( record - > event . pressed ) {
rgblight_increase_speed ( ) ;
}
return false ;
case RGB_SPD :
if ( record - > event . pressed ) {
rgblight_decrease_speed ( ) ;
}
return false ;
2017-09-07 03:49:19 +06:00
case RGB_MODE_PLAIN :
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_STATIC_LIGHT ) ;
2017-09-07 03:49:19 +06:00
}
return false ;
case RGB_MODE_BREATHE :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_BREATHING
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_BREATHING < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_BREATHING_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_BREATHING ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_RAINBOW :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_RAINBOW_MOOD
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_RAINBOW_MOOD < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_RAINBOW_MOOD_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_RAINBOW_MOOD ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_SWIRL :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_RAINBOW_SWIRL
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_RAINBOW_SWIRL < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_RAINBOW_SWIRL_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_RAINBOW_SWIRL ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_SNAKE :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_SNAKE
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_SNAKE < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_SNAKE_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_SNAKE ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_KNIGHT :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_KNIGHT
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_KNIGHT < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_KNIGHT_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_KNIGHT ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_XMAS :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_CHRISTMAS
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_CHRISTMAS ) ;
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
case RGB_MODE_GRADIENT :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_STATIC_GRADIENT
2017-09-07 03:49:19 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
if ( ( RGBLIGHT_MODE_STATIC_GRADIENT < = rgblight_get_mode ( ) ) & &
( rgblight_get_mode ( ) < RGBLIGHT_MODE_STATIC_GRADIENT_end ) ) {
2017-09-07 03:49:19 +06:00
rgblight_step ( ) ;
} else {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_STATIC_GRADIENT ) ;
2016-07-08 13:32:28 +06:00
}
2017-09-07 03:49:19 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2017-09-07 03:49:19 +06:00
return false ;
2018-06-04 21:10:39 +06:00
case RGB_MODE_RGBTEST :
2018-09-13 23:24:10 +06:00
# ifdef RGBLIGHT_EFFECT_RGB_TEST
2018-06-04 21:10:39 +06:00
if ( record - > event . pressed ) {
2018-09-13 23:24:10 +06:00
rgblight_mode ( RGBLIGHT_MODE_RGB_TEST ) ;
2018-06-04 21:10:39 +06:00
}
2018-09-13 23:24:10 +06:00
# endif
2018-06-04 21:10:39 +06:00
return false ;
# endif // defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
2019-02-21 21:22:46 +06:00
# ifdef VELOCIKEY_ENABLE
case VLK_TOG :
if ( record - > event . pressed ) {
velocikey_toggle ( ) ;
}
return false ;
# endif
# ifdef PROTOCOL_LUFA
2017-02-01 14:35:21 +06:00
case OUT_AUTO :
if ( record - > event . pressed ) {
set_output ( OUTPUT_AUTO ) ;
}
return false ;
case OUT_USB :
if ( record - > event . pressed ) {
set_output ( OUTPUT_USB ) ;
}
return false ;
# ifdef BLUETOOTH_ENABLE
case OUT_BT :
if ( record - > event . pressed ) {
set_output ( OUTPUT_BLUETOOTH ) ;
}
return false ;
# endif
2017-02-01 18:37:52 +06:00
# endif
2016-09-07 10:19:01 +06:00
case MAGIC_SWAP_CONTROL_CAPSLOCK . . . MAGIC_TOGGLE_NKRO :
2016-06-19 00:30:24 +06:00
if ( record - > event . pressed ) {
// MAGIC actions (BOOTMAGIC without the boot)
if ( ! eeconfig_is_enabled ( ) ) {
eeconfig_init ( ) ;
}
/* keymap config */
keymap_config . raw = eeconfig_read_keymap ( ) ;
2016-09-07 10:19:01 +06:00
switch ( keycode )
{
case MAGIC_SWAP_CONTROL_CAPSLOCK :
keymap_config . swap_control_capslock = true ;
break ;
case MAGIC_CAPSLOCK_TO_CONTROL :
keymap_config . capslock_to_control = true ;
break ;
case MAGIC_SWAP_LALT_LGUI :
keymap_config . swap_lalt_lgui = true ;
break ;
case MAGIC_SWAP_RALT_RGUI :
keymap_config . swap_ralt_rgui = true ;
break ;
case MAGIC_NO_GUI :
keymap_config . no_gui = true ;
break ;
case MAGIC_SWAP_GRAVE_ESC :
keymap_config . swap_grave_esc = true ;
break ;
case MAGIC_SWAP_BACKSLASH_BACKSPACE :
keymap_config . swap_backslash_backspace = true ;
break ;
case MAGIC_HOST_NKRO :
keymap_config . nkro = true ;
break ;
case MAGIC_SWAP_ALT_GUI :
keymap_config . swap_lalt_lgui = true ;
keymap_config . swap_ralt_rgui = true ;
2017-07-21 09:57:11 +06:00
# ifdef AUDIO_ENABLE
PLAY_SONG ( ag_swap_song ) ;
# endif
2016-09-07 10:19:01 +06:00
break ;
case MAGIC_UNSWAP_CONTROL_CAPSLOCK :
keymap_config . swap_control_capslock = false ;
break ;
case MAGIC_UNCAPSLOCK_TO_CONTROL :
keymap_config . capslock_to_control = false ;
break ;
case MAGIC_UNSWAP_LALT_LGUI :
keymap_config . swap_lalt_lgui = false ;
break ;
case MAGIC_UNSWAP_RALT_RGUI :
keymap_config . swap_ralt_rgui = false ;
break ;
case MAGIC_UNNO_GUI :
keymap_config . no_gui = false ;
break ;
case MAGIC_UNSWAP_GRAVE_ESC :
keymap_config . swap_grave_esc = false ;
break ;
case MAGIC_UNSWAP_BACKSLASH_BACKSPACE :
keymap_config . swap_backslash_backspace = false ;
break ;
case MAGIC_UNHOST_NKRO :
keymap_config . nkro = false ;
break ;
case MAGIC_UNSWAP_ALT_GUI :
keymap_config . swap_lalt_lgui = false ;
keymap_config . swap_ralt_rgui = false ;
2017-07-21 09:57:11 +06:00
# ifdef AUDIO_ENABLE
PLAY_SONG ( ag_norm_song ) ;
# endif
2016-09-07 10:19:01 +06:00
break ;
2018-09-17 22:23:43 +06:00
case MAGIC_TOGGLE_ALT_GUI :
keymap_config . swap_lalt_lgui = ! keymap_config . swap_lalt_lgui ;
keymap_config . swap_ralt_rgui = ! keymap_config . swap_ralt_rgui ;
# ifdef AUDIO_ENABLE
if ( keymap_config . swap_ralt_rgui ) {
PLAY_SONG ( ag_swap_song ) ;
} else {
PLAY_SONG ( ag_norm_song ) ;
}
# endif
break ;
2016-09-07 10:19:01 +06:00
case MAGIC_TOGGLE_NKRO :
keymap_config . nkro = ! keymap_config . nkro ;
break ;
default :
break ;
2016-06-19 00:30:24 +06:00
}
eeconfig_update_keymap ( keymap_config . raw ) ;
2016-09-07 10:19:01 +06:00
clear_keyboard ( ) ; // clear to prevent stuck keys
2016-06-19 00:30:24 +06:00
return false ;
}
break ;
2017-12-14 11:20:44 +06:00
2017-06-17 03:56:50 +06:00
case GRAVE_ESC : {
uint8_t shifted = get_mods ( ) & ( ( MOD_BIT ( KC_LSHIFT ) | MOD_BIT ( KC_RSHIFT )
| MOD_BIT ( KC_LGUI ) | MOD_BIT ( KC_RGUI ) ) ) ;
2017-08-12 15:57:42 +06:00
2017-11-29 04:08:32 +06:00
# ifdef GRAVE_ESC_ALT_OVERRIDE
// if ALT is pressed, ESC is always sent
// this is handy for the cmd+opt+esc shortcut on macOS, among other things.
if ( get_mods ( ) & ( MOD_BIT ( KC_LALT ) | MOD_BIT ( KC_RALT ) ) ) {
shifted = 0 ;
}
# endif
2017-08-11 22:53:08 +06:00
# ifdef GRAVE_ESC_CTRL_OVERRIDE
2017-11-29 04:08:32 +06:00
// if CTRL is pressed, ESC is always sent
2017-08-12 01:43:49 +06:00
// this is handy for the ctrl+shift+esc shortcut on windows, among other things.
2017-11-29 04:08:32 +06:00
if ( get_mods ( ) & ( MOD_BIT ( KC_LCTL ) | MOD_BIT ( KC_RCTL ) ) ) {
2017-08-11 22:53:08 +06:00
shifted = 0 ;
2017-11-29 04:08:32 +06:00
}
# endif
# ifdef GRAVE_ESC_GUI_OVERRIDE
// if GUI is pressed, ESC is always sent
if ( get_mods ( ) & ( MOD_BIT ( KC_LGUI ) | MOD_BIT ( KC_RGUI ) ) ) {
shifted = 0 ;
}
# endif
# ifdef GRAVE_ESC_SHIFT_OVERRIDE
// if SHIFT is pressed, ESC is always sent
if ( get_mods ( ) & ( MOD_BIT ( KC_LSHIFT ) | MOD_BIT ( KC_RSHIFT ) ) ) {
shifted = 0 ;
}
2017-08-11 22:53:08 +06:00
# endif
2017-06-17 03:56:50 +06:00
2017-08-12 15:57:42 +06:00
if ( record - > event . pressed ) {
grave_esc_was_shifted = shifted ;
add_key ( shifted ? KC_GRAVE : KC_ESCAPE ) ;
}
else {
del_key ( grave_esc_was_shifted ? KC_GRAVE : KC_ESCAPE ) ;
}
send_keyboard_report ( ) ;
2018-01-02 04:47:51 +06:00
return false ;
2017-06-17 03:56:50 +06:00
}
2018-01-02 04:47:51 +06:00
# if defined(BACKLIGHT_ENABLE) && defined(BACKLIGHT_BREATHING)
case BL_BRTG : {
if ( record - > event . pressed )
breathing_toggle ( ) ;
return false ;
}
# endif
2016-05-25 09:27:59 +06:00
}
2016-05-15 10:27:32 +06:00
return process_action_kb ( record ) ;
}
2017-07-01 01:08:09 +06:00
__attribute__ ( ( weak ) )
2017-06-29 23:02:38 +06:00
const bool ascii_to_shift_lut [ 0x80 ] PROGMEM = {
2016-06-04 01:48:40 +06:00
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 1 , 1 , 1 , 1 , 1 , 1 , 0 ,
1 , 1 , 1 , 1 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 1 , 0 , 1 , 0 , 1 , 1 ,
1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 ,
1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 ,
1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 ,
1 , 1 , 1 , 0 , 0 , 0 , 1 , 1 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 1 , 1 , 1 , 1 , 0
2016-06-02 08:49:55 +06:00
} ;
2018-10-03 00:08:41 +06:00
__attribute__ ( ( weak ) )
2019-04-12 04:21:45 +06:00
const bool ascii_to_altgr_lut [ 0x80 ] PROGMEM = {
2018-10-03 00:08:41 +06:00
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0
} ;
2017-07-01 01:08:09 +06:00
__attribute__ ( ( weak ) )
2017-06-29 23:02:38 +06:00
const uint8_t ascii_to_keycode_lut [ 0x80 ] PROGMEM = {
2016-06-04 01:48:40 +06:00
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
KC_BSPC , KC_TAB , KC_ENT , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 ,
0 , 0 , 0 , KC_ESC , 0 , 0 , 0 , 0 ,
KC_SPC , KC_1 , KC_QUOT , KC_3 , KC_4 , KC_5 , KC_7 , KC_QUOT ,
KC_9 , KC_0 , KC_8 , KC_EQL , KC_COMM , KC_MINS , KC_DOT , KC_SLSH ,
KC_0 , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 ,
KC_8 , KC_9 , KC_SCLN , KC_SCLN , KC_COMM , KC_EQL , KC_DOT , KC_SLSH ,
KC_2 , KC_A , KC_B , KC_C , KC_D , KC_E , KC_F , KC_G ,
KC_H , KC_I , KC_J , KC_K , KC_L , KC_M , KC_N , KC_O ,
KC_P , KC_Q , KC_R , KC_S , KC_T , KC_U , KC_V , KC_W ,
KC_X , KC_Y , KC_Z , KC_LBRC , KC_BSLS , KC_RBRC , KC_6 , KC_MINS ,
KC_GRV , KC_A , KC_B , KC_C , KC_D , KC_E , KC_F , KC_G ,
KC_H , KC_I , KC_J , KC_K , KC_L , KC_M , KC_N , KC_O ,
KC_P , KC_Q , KC_R , KC_S , KC_T , KC_U , KC_V , KC_W ,
KC_X , KC_Y , KC_Z , KC_LBRC , KC_BSLS , KC_RBRC , KC_GRV , KC_DEL
2016-06-02 08:49:55 +06:00
} ;
2017-06-24 15:29:37 +06:00
void send_string ( const char * str ) {
2017-06-29 23:02:38 +06:00
send_string_with_delay ( str , 0 ) ;
}
2017-09-12 10:43:10 +06:00
void send_string_P ( const char * str ) {
send_string_with_delay_P ( str , 0 ) ;
}
2017-06-29 23:02:38 +06:00
void send_string_with_delay ( const char * str , uint8_t interval ) {
2017-06-24 15:29:37 +06:00
while ( 1 ) {
2017-09-12 10:43:10 +06:00
char ascii_code = * str ;
2017-06-24 15:29:37 +06:00
if ( ! ascii_code ) break ;
2019-03-30 09:24:13 +06:00
if ( ascii_code = = SS_TAP_CODE ) {
2017-09-12 10:43:10 +06:00
// tap
uint8_t keycode = * ( + + str ) ;
register_code ( keycode ) ;
unregister_code ( keycode ) ;
2019-03-30 09:24:13 +06:00
} else if ( ascii_code = = SS_DOWN_CODE ) {
2017-09-12 10:43:10 +06:00
// down
uint8_t keycode = * ( + + str ) ;
register_code ( keycode ) ;
2019-03-30 09:24:13 +06:00
} else if ( ascii_code = = SS_UP_CODE ) {
2017-09-12 10:43:10 +06:00
// up
uint8_t keycode = * ( + + str ) ;
unregister_code ( keycode ) ;
} else {
send_char ( ascii_code ) ;
2017-06-24 15:29:37 +06:00
}
2017-09-12 10:43:10 +06:00
+ + str ;
// interval
{ uint8_t ms = interval ; while ( ms - - ) wait_ms ( 1 ) ; }
}
}
void send_string_with_delay_P ( const char * str , uint8_t interval ) {
while ( 1 ) {
char ascii_code = pgm_read_byte ( str ) ;
if ( ! ascii_code ) break ;
2019-03-30 09:24:13 +06:00
if ( ascii_code = = SS_TAP_CODE ) {
2017-09-12 10:43:10 +06:00
// tap
uint8_t keycode = pgm_read_byte ( + + str ) ;
register_code ( keycode ) ;
unregister_code ( keycode ) ;
2019-03-30 09:24:13 +06:00
} else if ( ascii_code = = SS_DOWN_CODE ) {
2017-09-12 10:43:10 +06:00
// down
uint8_t keycode = pgm_read_byte ( + + str ) ;
register_code ( keycode ) ;
2019-03-30 09:24:13 +06:00
} else if ( ascii_code = = SS_UP_CODE ) {
2017-09-12 10:43:10 +06:00
// up
uint8_t keycode = pgm_read_byte ( + + str ) ;
unregister_code ( keycode ) ;
} else {
send_char ( ascii_code ) ;
2017-06-24 15:29:37 +06:00
}
+ + str ;
2017-06-29 23:02:38 +06:00
// interval
{ uint8_t ms = interval ; while ( ms - - ) wait_ms ( 1 ) ; }
2017-06-24 15:29:37 +06:00
}
}
2017-09-12 10:43:10 +06:00
void send_char ( char ascii_code ) {
2019-04-12 04:12:26 +06:00
uint8_t keycode = pgm_read_byte ( & ascii_to_keycode_lut [ ( uint8_t ) ascii_code ] ) ;
bool is_shifted = pgm_read_byte ( & ascii_to_shift_lut [ ( uint8_t ) ascii_code ] ) ;
2019-04-12 04:21:45 +06:00
bool is_altgred = pgm_read_byte ( & ascii_to_altgr_lut [ ( uint8_t ) ascii_code ] ) ;
2018-10-03 00:08:41 +06:00
2019-03-24 00:25:26 +06:00
if ( is_shifted ) {
register_code ( KC_LSFT ) ;
}
2019-04-12 04:21:45 +06:00
if ( is_altgred ) {
2019-03-24 00:25:26 +06:00
register_code ( KC_RALT ) ;
}
2019-02-17 22:58:02 +06:00
tap_code ( keycode ) ;
2019-04-12 04:21:45 +06:00
if ( is_altgred ) {
2019-03-24 00:25:26 +06:00
unregister_code ( KC_RALT ) ;
}
if ( is_shifted ) {
unregister_code ( KC_LSFT ) ;
}
2017-09-12 10:43:10 +06:00
}
2017-07-21 09:57:11 +06:00
void set_single_persistent_default_layer ( uint8_t default_layer ) {
2017-08-11 02:52:24 +06:00
# if defined(AUDIO_ENABLE) && defined(DEFAULT_LAYER_SONGS)
2017-07-21 09:57:11 +06:00
PLAY_SONG ( default_layer_songs [ default_layer ] ) ;
# endif
eeconfig_update_default_layer ( 1U < < default_layer ) ;
default_layer_set ( 1U < < default_layer ) ;
}
2018-04-27 02:10:03 +06:00
uint32_t update_tri_layer_state ( uint32_t state , uint8_t layer1 , uint8_t layer2 , uint8_t layer3 ) {
uint32_t mask12 = ( 1UL < < layer1 ) | ( 1UL < < layer2 ) ;
uint32_t mask3 = 1UL < < layer3 ;
return ( state & mask12 ) = = mask12 ? ( state | mask3 ) : ( state & ~ mask3 ) ;
}
2016-06-19 00:30:24 +06:00
void update_tri_layer ( uint8_t layer1 , uint8_t layer2 , uint8_t layer3 ) {
2018-04-27 02:10:03 +06:00
layer_state_set ( update_tri_layer_state ( layer_state , layer1 , layer2 , layer3 ) ) ;
2016-06-19 00:30:24 +06:00
}
2016-06-02 08:49:55 +06:00
2016-06-30 04:29:20 +06:00
void tap_random_base64 ( void ) {
2016-06-30 04:35:29 +06:00
# if defined(__AVR_ATmega32U4__)
uint8_t key = ( TCNT0 + TCNT1 + TCNT3 + TCNT4 ) % 64 ;
# else
uint8_t key = rand ( ) % 64 ;
# endif
2016-06-30 04:29:20 +06:00
switch ( key ) {
case 0 . . . 25 :
register_code ( KC_LSFT ) ;
register_code ( key + KC_A ) ;
unregister_code ( key + KC_A ) ;
unregister_code ( KC_LSFT ) ;
break ;
case 26 . . . 51 :
register_code ( key - 26 + KC_A ) ;
unregister_code ( key - 26 + KC_A ) ;
break ;
case 52 :
register_code ( KC_0 ) ;
unregister_code ( KC_0 ) ;
break ;
case 53 . . . 61 :
register_code ( key - 53 + KC_1 ) ;
unregister_code ( key - 53 + KC_1 ) ;
break ;
case 62 :
register_code ( KC_LSFT ) ;
register_code ( KC_EQL ) ;
unregister_code ( KC_EQL ) ;
unregister_code ( KC_LSFT ) ;
break ;
case 63 :
register_code ( KC_SLSH ) ;
unregister_code ( KC_SLSH ) ;
break ;
}
}
2018-10-28 00:53:50 +06:00
__attribute__ ( ( weak ) )
void bootmagic_lite ( void ) {
// The lite version of TMK's bootmagic based on Wilba.
// 100% less potential for accidentally making the
// keyboard do stupid things.
// We need multiple scans because debouncing can't be turned off.
matrix_scan ( ) ;
# if defined(DEBOUNCING_DELAY) && DEBOUNCING_DELAY > 0
wait_ms ( DEBOUNCING_DELAY * 2 ) ;
# elif defined(DEBOUNCE) && DEBOUNCE > 0
wait_ms ( DEBOUNCE * 2 ) ;
# else
wait_ms ( 30 ) ;
# endif
matrix_scan ( ) ;
// If the Esc and space bar are held down on power up,
// reset the EEPROM valid state and jump to bootloader.
// Assumes Esc is at [0,0].
// This isn't very generalized, but we need something that doesn't
// rely on user's keymaps in firmware or EEPROM.
if ( matrix_get_row ( BOOTMAGIC_LITE_ROW ) & ( 1 < < BOOTMAGIC_LITE_COLUMN ) ) {
eeconfig_disable ( ) ;
// Jump to bootloader.
bootloader_jump ( ) ;
}
}
2016-05-15 10:27:32 +06:00
void matrix_init_quantum ( ) {
2018-10-28 00:53:50 +06:00
# ifdef BOOTMAGIC_LITE
bootmagic_lite ( ) ;
# endif
if ( ! eeconfig_is_enabled ( ) ) {
2018-10-02 06:53:14 +06:00
eeconfig_init ( ) ;
}
2016-06-24 08:18:20 +06:00
# ifdef BACKLIGHT_ENABLE
2019-01-27 04:33:55 +06:00
# ifdef LED_MATRIX_ENABLE
led_matrix_init ( ) ;
# else
backlight_init_ports ( ) ;
# endif
2016-06-24 08:18:20 +06:00
# endif
2017-07-21 09:57:11 +06:00
# ifdef AUDIO_ENABLE
audio_init ( ) ;
# endif
2018-05-09 01:24:18 +06:00
# ifdef RGB_MATRIX_ENABLE
2018-06-13 09:37:06 +06:00
rgb_matrix_init ( ) ;
2018-05-09 01:24:18 +06:00
# endif
2018-10-27 02:19:23 +06:00
# ifdef ENCODER_ENABLE
encoder_init ( ) ;
# endif
2018-12-19 22:39:24 +06:00
# if defined(UNICODE_ENABLE) || defined(UNICODEMAP_ENABLE) || defined(UCIS_ENABLE)
unicode_input_mode_init ( ) ;
# endif
2019-02-17 08:39:30 +06:00
# ifdef HAPTIC_ENABLE
haptic_init ( ) ;
# endif
2019-04-20 02:07:35 +06:00
# ifdef OUTPUT_AUTO_ENABLE
set_output ( OUTPUT_AUTO ) ;
# endif
2019-04-16 09:32:57 +06:00
# ifdef OLED_DRIVER_ENABLE
oled_init ( OLED_ROTATION_0 ) ;
# endif
2016-05-15 10:27:32 +06:00
matrix_init_kb ( ) ;
}
void matrix_scan_quantum ( ) {
2018-07-30 10:24:42 +06:00
# if defined(AUDIO_ENABLE) && !defined(NO_MUSIC_MODE)
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
matrix_scan_music ( ) ;
2016-05-15 10:40:59 +06:00
# endif
2016-05-15 10:51:06 +06:00
Moves features to their own files (process_*), adds tap dance feature (#460)
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
2016-06-30 03:49:41 +06:00
# ifdef TAP_DANCE_ENABLE
matrix_scan_tap_dance ( ) ;
# endif
2016-12-10 20:11:59 +06:00
# ifdef COMBO_ENABLE
matrix_scan_combo ( ) ;
# endif
2019-01-27 04:33:55 +06:00
# if defined(BACKLIGHT_ENABLE)
# if defined(LED_MATRIX_ENABLE)
led_matrix_task ( ) ;
# elif defined(BACKLIGHT_PIN)
backlight_task ( ) ;
# endif
2017-02-12 22:29:42 +06:00
# endif
2018-05-09 01:24:18 +06:00
# ifdef RGB_MATRIX_ENABLE
rgb_matrix_task ( ) ;
# endif
2018-10-27 02:19:23 +06:00
# ifdef ENCODER_ENABLE
encoder_read ( ) ;
# endif
2019-02-17 08:39:30 +06:00
# ifdef HAPTIC_ENABLE
haptic_task ( ) ;
# endif
2019-04-16 09:32:57 +06:00
# ifdef OLED_DRIVER_ENABLE
oled_task ( ) ;
# endif
2016-05-15 10:27:32 +06:00
matrix_scan_kb ( ) ;
2016-05-19 09:14:00 +06:00
}
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))
2016-06-24 08:18:20 +06:00
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
// The logic is a bit complex, we support 3 setups:
// 1. hardware PWM when backlight is wired to a PWM pin
// depending on this pin, we use a different output compare unit
// 2. software PWM with hardware timers, but the used timer depends
// on the audio setup (audio wins other backlight)
// 3. full software PWM
2016-06-24 08:18:20 +06:00
# if BACKLIGHT_PIN == B7
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# define HARDWARE_PWM
2018-07-13 22:48:14 +06:00
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define COMxx1 COM1C1
# define OCRxx OCR1C
# define ICRx ICR1
2016-06-24 08:18:20 +06:00
# elif BACKLIGHT_PIN == B6
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# define HARDWARE_PWM
2018-07-13 22:48:14 +06:00
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define COMxx1 COM1B1
# define OCRxx OCR1B
# define ICRx ICR1
2016-06-24 08:18:20 +06:00
# elif BACKLIGHT_PIN == B5
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# define HARDWARE_PWM
2018-07-13 22:48:14 +06:00
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define COMxx1 COM1A1
# define OCRxx OCR1A
# define ICRx ICR1
# elif BACKLIGHT_PIN == C6
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# define HARDWARE_PWM
2018-07-13 22:48:14 +06:00
# define TCCRxA TCCR3A
# define TCCRxB TCCR3B
# define COMxx1 COM1A1
# define OCRxx OCR3A
# define ICRx ICR3
2019-04-08 23:53:15 +06:00
# elif defined(__AVR_ATmega32A__) && BACKLIGHT_PIN == D4
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define COMxx1 COM1B1
# define OCRxx OCR1B
# define ICRx ICR1
# define TIMSK1 TIMSK
2016-06-24 08:18:20 +06:00
# else
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# if !defined(BACKLIGHT_CUSTOM_DRIVER)
# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
// timer 1 is not used by audio , backlight can use it
# pragma message "Using hardware timer 1 with software PWM"
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define OCRxx OCR1A
# define OCRxAH OCR1AH
# define OCRxAL OCR1AL
# define TIMERx_COMPA_vect TIMER1_COMPA_vect
# define TIMERx_OVF_vect TIMER1_OVF_vect
# define OCIExA OCIE1A
# define TOIEx TOIE1
# define ICRx ICR1
# ifndef TIMSK
# define TIMSK TIMSK1
# endif
# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
# pragma message "Using hardware timer 3 with software PWM"
// timer 3 is not used by audio, backlight can use it
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define TCCRxA TCCR3A
# define TCCRxB TCCR3B
# define OCRxx OCR3A
# define OCRxAH OCR3AH
# define OCRxAL OCR3AL
# define TIMERx_COMPA_vect TIMER3_COMPA_vect
# define TIMERx_OVF_vect TIMER3_OVF_vect
# define OCIExA OCIE3A
# define TOIEx TOIE3
# define ICRx ICR1
# ifndef TIMSK
# define TIMSK TIMSK3
# endif
# else
# pragma message "Audio in use - using pure software PWM"
# define NO_HARDWARE_PWM
# endif
# else
# pragma message "Custom driver defined - using pure software PWM"
# define NO_HARDWARE_PWM
# endif
2017-02-08 02:23:56 +06:00
# endif
# ifndef BACKLIGHT_ON_STATE
# define BACKLIGHT_ON_STATE 0
2016-06-24 08:18:20 +06:00
# endif
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
void backlight_on ( uint8_t backlight_pin ) {
# if BACKLIGHT_ON_STATE == 0
writePinLow ( backlight_pin ) ;
# else
writePinHigh ( backlight_pin ) ;
# endif
}
2018-01-02 04:47:51 +06:00
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
void backlight_off ( uint8_t backlight_pin ) {
# if BACKLIGHT_ON_STATE == 0
writePinHigh ( backlight_pin ) ;
# else
writePinLow ( backlight_pin ) ;
# endif
}
# if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER) // pwm through software
// we support multiple backlight pins
# ifndef BACKLIGHT_LED_COUNT
# define BACKLIGHT_LED_COUNT 1
# endif
# if BACKLIGHT_LED_COUNT == 1
# define BACKLIGHT_PIN_INIT { BACKLIGHT_PIN }
# else
# define BACKLIGHT_PIN_INIT BACKLIGHT_PINS
# endif
# define FOR_EACH_LED(x) \
for ( uint8_t i = 0 ; i < BACKLIGHT_LED_COUNT ; i + + ) \
{ \
uint8_t backlight_pin = backlight_pins [ i ] ; \
{ \
x \
} \
}
static const uint8_t backlight_pins [ BACKLIGHT_LED_COUNT ] = BACKLIGHT_PIN_INIT ;
# else // full hardware PWM
// we support only one backlight pin
static const uint8_t backlight_pin = BACKLIGHT_PIN ;
# define FOR_EACH_LED(x) x
# endif
# ifdef NO_HARDWARE_PWM
__attribute__ ( ( weak ) )
2016-06-24 08:18:20 +06:00
void backlight_init_ports ( void )
{
2017-02-08 02:23:56 +06:00
// Setup backlight pin as output and output to on state.
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
FOR_EACH_LED (
setPinOutput ( backlight_pin ) ;
backlight_on ( backlight_pin ) ;
)
2016-06-24 08:18:20 +06:00
}
__attribute__ ( ( weak ) )
2018-01-02 04:47:51 +06:00
void backlight_set ( uint8_t level ) { }
2016-06-24 08:18:20 +06:00
2017-02-12 22:29:42 +06:00
uint8_t backlight_tick = 0 ;
2018-01-19 03:02:32 +06:00
# ifndef BACKLIGHT_CUSTOM_DRIVER
2017-02-12 22:29:42 +06:00
void backlight_task ( void ) {
2018-01-02 04:47:51 +06:00
if ( ( 0xFFFF > > ( ( BACKLIGHT_LEVELS - get_backlight_level ( ) ) * ( ( BACKLIGHT_LEVELS + 1 ) / 2 ) ) ) & ( 1 < < backlight_tick ) ) {
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
FOR_EACH_LED (
backlight_on ( backlight_pin ) ;
)
}
else {
FOR_EACH_LED (
backlight_off ( backlight_pin ) ;
)
2017-02-12 22:29:42 +06:00
}
2018-02-02 04:12:23 +06:00
backlight_tick = ( backlight_tick + 1 ) % 16 ;
2017-02-12 22:29:42 +06:00
}
2018-01-19 03:02:32 +06:00
# endif
2016-06-24 08:18:20 +06:00
# ifdef BACKLIGHT_BREATHING
2018-01-19 03:02:32 +06:00
# ifndef BACKLIGHT_CUSTOM_DRIVER
# error "Backlight breathing only available with hardware PWM. Please disable."
# endif
2018-01-02 04:47:51 +06:00
# endif
2016-06-24 08:18:20 +06:00
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# else // hardware pwm through timer
# ifdef BACKLIGHT_PWM_TIMER
// The idea of software PWM assisted by hardware timers is the following
// we use the hardware timer in fast PWM mode like for hardware PWM, but
// instead of letting the Output Match Comparator control the led pin
// (which is not possible since the backlight is not wired to PWM pins on the
// CPU), we do the LED on/off by oursleves.
// The timer is setup to count up to 0xFFFF, and we set the Output Compare
// register to the current 16bits backlight level (after CIE correction).
// This means the CPU will trigger a compare match interrupt when the counter
// reaches the backlight level, where we turn off the LEDs,
// but also an overflow interrupt when the counter rolls back to 0,
// in which we're going to turn on the LEDs.
// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz.
// Triggered when the counter reaches the OCRx value
ISR ( TIMERx_COMPA_vect ) {
FOR_EACH_LED (
backlight_off ( backlight_pin ) ;
)
}
// Triggered when the counter reaches the TOP value
// this one triggers at F_CPU/65536 =~ 244 Hz
ISR ( TIMERx_OVF_vect ) {
# ifdef BACKLIGHT_BREATHING
breathing_task ( ) ;
# endif
// for very small values of OCRxx (or backlight level)
// we can't guarantee this whole code won't execute
// at the same time as the compare match interrupt
// which means that we might turn on the leds while
// trying to turn them off, leading to flickering
// artifacts (especially while breathing, because breathing_task
// takes many computation cycles).
// so better not turn them on while the counter TOP is very low.
if ( OCRxx > 256 ) {
FOR_EACH_LED (
backlight_on ( backlight_pin ) ;
)
}
}
# endif
2018-01-02 04:47:51 +06:00
# define TIMER_TOP 0xFFFFU
// See http://jared.geek.nz/2013/feb/linear-led-pwm
static uint16_t cie_lightness ( uint16_t v ) {
if ( v < = 5243 ) // if below 8% of max
return v / 9 ; // same as dividing by 900%
else {
uint32_t y = ( ( ( uint32_t ) v + 10486 ) < < 8 ) / ( 10486 + 0xFFFFUL ) ; // add 16% of max and compare
// to get a useful result with integer division, we shift left in the expression above
// and revert what we've done again after squaring.
y = y * y * y > > 8 ;
if ( y > 0xFFFFUL ) // prevent overflow
return 0xFFFFU ;
else
return ( uint16_t ) y ;
}
}
// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
static inline void set_pwm ( uint16_t val ) {
2018-07-13 22:48:14 +06:00
OCRxx = val ;
2018-01-02 04:47:51 +06:00
}
2019-01-28 06:58:21 +06:00
# ifndef BACKLIGHT_CUSTOM_DRIVER
2018-01-02 04:47:51 +06:00
__attribute__ ( ( weak ) )
void backlight_set ( uint8_t level ) {
if ( level > BACKLIGHT_LEVELS )
level = BACKLIGHT_LEVELS ;
if ( level = = 0 ) {
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# ifdef BACKLIGHT_PWM_TIMER
if ( OCRxx ) {
TIMSK & = ~ ( _BV ( OCIExA ) ) ;
TIMSK & = ~ ( _BV ( TOIEx ) ) ;
FOR_EACH_LED (
backlight_off ( backlight_pin ) ;
)
}
# else
2018-01-02 04:47:51 +06:00
// Turn off PWM control on backlight pin
2018-07-13 22:48:14 +06:00
TCCRxA & = ~ ( _BV ( COMxx1 ) ) ;
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif
2018-01-02 04:47:51 +06:00
} else {
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# ifdef BACKLIGHT_PWM_TIMER
if ( ! OCRxx ) {
TIMSK | = _BV ( OCIExA ) ;
TIMSK | = _BV ( TOIEx ) ;
}
# else
2018-01-02 04:47:51 +06:00
// Turn on PWM control of backlight pin
2018-07-13 22:48:14 +06:00
TCCRxA | = _BV ( COMxx1 ) ;
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif
2018-01-02 04:47:51 +06:00
}
// Set the brightness
set_pwm ( cie_lightness ( TIMER_TOP * ( uint32_t ) level / BACKLIGHT_LEVELS ) ) ;
}
void backlight_task ( void ) { }
2018-01-19 03:02:32 +06:00
# endif // BACKLIGHT_CUSTOM_DRIVER
2018-01-02 04:47:51 +06:00
# ifdef BACKLIGHT_BREATHING
2017-12-06 03:13:27 +06:00
2016-06-24 08:18:20 +06:00
# define BREATHING_NO_HALT 0
# define BREATHING_HALT_OFF 1
# define BREATHING_HALT_ON 2
2018-01-02 04:47:51 +06:00
# define BREATHING_STEPS 128
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
static uint8_t breathing_period = BREATHING_PERIOD ;
static uint8_t breathing_halt = BREATHING_NO_HALT ;
static uint16_t breathing_counter = 0 ;
2016-06-24 08:18:20 +06:00
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# ifdef BACKLIGHT_PWM_TIMER
static bool breathing = false ;
bool is_breathing ( void ) {
return breathing ;
}
# define breathing_interrupt_enable() do { breathing = true; } while (0)
# define breathing_interrupt_disable() do { breathing = false; } while (0)
# else
2018-01-02 04:47:51 +06:00
bool is_breathing ( void ) {
return ! ! ( TIMSK1 & _BV ( TOIE1 ) ) ;
}
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
# define breathing_interrupt_enable() do {TIMSK1 |= _BV(TOIE1);} while (0)
# define breathing_interrupt_disable() do {TIMSK1 &= ~_BV(TOIE1);} while (0)
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif
2018-01-02 04:47:51 +06:00
# define breathing_min() do {breathing_counter = 0;} while (0)
# define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
void breathing_enable ( void )
{
breathing_counter = 0 ;
breathing_halt = BREATHING_NO_HALT ;
breathing_interrupt_enable ( ) ;
2016-06-24 08:18:20 +06:00
}
void breathing_pulse ( void )
{
if ( get_backlight_level ( ) = = 0 )
2018-01-02 04:47:51 +06:00
breathing_min ( ) ;
2016-06-24 08:18:20 +06:00
else
2018-01-02 04:47:51 +06:00
breathing_max ( ) ;
2016-06-24 08:18:20 +06:00
breathing_halt = BREATHING_HALT_ON ;
2018-01-02 04:47:51 +06:00
breathing_interrupt_enable ( ) ;
2016-06-24 08:18:20 +06:00
}
void breathing_disable ( void )
{
2018-01-02 04:47:51 +06:00
breathing_interrupt_disable ( ) ;
// Restore backlight level
2016-06-24 08:18:20 +06:00
backlight_set ( get_backlight_level ( ) ) ;
}
void breathing_self_disable ( void )
{
2018-01-02 04:47:51 +06:00
if ( get_backlight_level ( ) = = 0 )
breathing_halt = BREATHING_HALT_OFF ;
else
breathing_halt = BREATHING_HALT_ON ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
void breathing_toggle ( void ) {
if ( is_breathing ( ) )
breathing_disable ( ) ;
else
breathing_enable ( ) ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
void breathing_period_set ( uint8_t value )
2016-06-24 08:18:20 +06:00
{
2018-01-02 04:47:51 +06:00
if ( ! value )
value = 1 ;
breathing_period = value ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
void breathing_period_default ( void ) {
breathing_period_set ( BREATHING_PERIOD ) ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
void breathing_period_inc ( void )
2016-06-24 08:18:20 +06:00
{
2018-01-02 04:47:51 +06:00
breathing_period_set ( breathing_period + 1 ) ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
void breathing_period_dec ( void )
2016-06-24 08:18:20 +06:00
{
2018-01-02 04:47:51 +06:00
breathing_period_set ( breathing_period - 1 ) ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
/* To generate breathing curve in python:
* from math import sin , pi ; [ int ( sin ( x / 128.0 * pi ) * * 4 * 255 ) for x in range ( 128 ) ]
*/
static const uint8_t breathing_table [ BREATHING_STEPS ] PROGMEM = { 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 1 , 1 , 2 , 3 , 4 , 5 , 6 , 8 , 10 , 12 , 15 , 17 , 20 , 24 , 28 , 32 , 36 , 41 , 46 , 51 , 57 , 63 , 70 , 76 , 83 , 91 , 98 , 106 , 113 , 121 , 129 , 138 , 146 , 154 , 162 , 170 , 178 , 185 , 193 , 200 , 207 , 213 , 220 , 225 , 231 , 235 , 240 , 244 , 247 , 250 , 252 , 253 , 254 , 255 , 254 , 253 , 252 , 250 , 247 , 244 , 240 , 235 , 231 , 225 , 220 , 213 , 207 , 200 , 193 , 185 , 178 , 170 , 162 , 154 , 146 , 138 , 129 , 121 , 113 , 106 , 98 , 91 , 83 , 76 , 70 , 63 , 57 , 51 , 46 , 41 , 36 , 32 , 28 , 24 , 20 , 17 , 15 , 12 , 10 , 8 , 6 , 5 , 4 , 3 , 2 , 1 , 1 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 , 0 } ;
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
// Use this before the cie_lightness function.
static inline uint16_t scale_backlight ( uint16_t v ) {
return v / BACKLIGHT_LEVELS * get_backlight_level ( ) ;
2016-06-24 08:18:20 +06:00
}
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# ifdef BACKLIGHT_PWM_TIMER
void breathing_task ( void )
# else
2018-01-02 04:47:51 +06:00
/* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run
* about 244 times per second .
*/
ISR ( TIMER1_OVF_vect )
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif
2016-06-24 08:18:20 +06:00
{
2018-01-02 04:47:51 +06:00
uint16_t interval = ( uint16_t ) breathing_period * 244 / BREATHING_STEPS ;
// resetting after one period to prevent ugly reset at overflow.
breathing_counter = ( breathing_counter + 1 ) % ( breathing_period * 244 ) ;
uint8_t index = breathing_counter / interval % BREATHING_STEPS ;
if ( ( ( breathing_halt = = BREATHING_HALT_ON ) & & ( index = = BREATHING_STEPS / 2 ) ) | |
( ( breathing_halt = = BREATHING_HALT_OFF ) & & ( index = = BREATHING_STEPS - 1 ) ) )
{
breathing_interrupt_disable ( ) ;
}
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
set_pwm ( cie_lightness ( scale_backlight ( ( uint16_t ) pgm_read_byte ( & breathing_table [ index ] ) * 0x0101U ) ) ) ;
2016-06-24 08:18:20 +06:00
}
2018-01-02 04:47:51 +06:00
# endif // BACKLIGHT_BREATHING
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
__attribute__ ( ( weak ) )
void backlight_init_ports ( void )
2016-06-24 08:18:20 +06:00
{
2018-01-02 04:47:51 +06:00
// Setup backlight pin as output and output to on state.
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
FOR_EACH_LED (
setPinOutput ( backlight_pin ) ;
backlight_on ( backlight_pin ) ;
)
2018-01-02 04:47:51 +06:00
// I could write a wall of text here to explain... but TL;DW
// Go read the ATmega32u4 datasheet.
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# ifdef BACKLIGHT_PWM_TIMER
// TimerX setup, Fast PWM mode count to TOP set in ICRx
TCCRxA = _BV ( WGM11 ) ; // = 0b00000010;
// clock select clk/1
TCCRxB = _BV ( WGM13 ) | _BV ( WGM12 ) | _BV ( CS10 ) ; // = 0b00011001;
# else // hardware PWM
2018-01-02 04:47:51 +06:00
// Pin PB7 = OCR1C (Timer 1, Channel C)
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
// (i.e. start high, go low when counter matches.)
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
/*
14.8 .3 :
" In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]. "
" In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15). "
*/
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
TCCRxA = _BV ( COMxx1 ) | _BV ( WGM11 ) ; // = 0b00001010;
2018-07-13 22:48:14 +06:00
TCCRxB = _BV ( WGM13 ) | _BV ( WGM12 ) | _BV ( CS10 ) ; // = 0b00011001;
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif
2018-01-02 04:47:51 +06:00
// Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
2018-07-13 22:48:14 +06:00
ICRx = TIMER_TOP ;
2016-06-24 08:18:20 +06:00
2018-01-02 04:47:51 +06:00
backlight_init ( ) ;
# ifdef BACKLIGHT_BREATHING
breathing_enable ( ) ;
# endif
2016-06-24 08:18:20 +06:00
}
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# endif // hardware backlight
2016-06-24 08:18:20 +06:00
Fix #3566 use an hardware timer for software PWM stability (#3615)
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
2019-04-22 21:34:13 +06:00
# else // no backlight
2016-06-24 08:18:20 +06:00
__attribute__ ( ( weak ) )
2018-01-02 04:47:51 +06:00
void backlight_init_ports ( void ) { }
2016-06-24 08:18:20 +06:00
__attribute__ ( ( weak ) )
2018-01-02 04:47:51 +06:00
void backlight_set ( uint8_t level ) { }
2016-06-24 08:18:20 +06:00
# endif // backlight
2018-07-15 23:31:45 +06:00
# ifdef HD44780_ENABLED
# include "hd44780.h"
# endif
2016-06-24 08:18:20 +06:00
2016-11-22 06:50:55 +06:00
// Functions for spitting out values
//
void send_dword ( uint32_t number ) { // this might not actually work
uint16_t word = ( number > > 16 ) ;
send_word ( word ) ;
send_word ( number & 0xFFFFUL ) ;
}
void send_word ( uint16_t number ) {
uint8_t byte = number > > 8 ;
send_byte ( byte ) ;
send_byte ( number & 0xFF ) ;
}
void send_byte ( uint8_t number ) {
uint8_t nibble = number > > 4 ;
send_nibble ( nibble ) ;
send_nibble ( number & 0xF ) ;
}
void send_nibble ( uint8_t number ) {
switch ( number ) {
case 0 :
register_code ( KC_0 ) ;
unregister_code ( KC_0 ) ;
break ;
case 1 . . . 9 :
register_code ( KC_1 + ( number - 1 ) ) ;
unregister_code ( KC_1 + ( number - 1 ) ) ;
break ;
case 0xA . . . 0xF :
register_code ( KC_A + ( number - 0xA ) ) ;
unregister_code ( KC_A + ( number - 0xA ) ) ;
break ;
}
}
2017-02-16 03:36:31 +06:00
__attribute__ ( ( weak ) )
uint16_t hex_to_keycode ( uint8_t hex )
{
2017-11-21 10:25:38 +06:00
hex = hex & 0xF ;
2017-02-16 03:36:31 +06:00
if ( hex = = 0x0 ) {
return KC_0 ;
} else if ( hex < 0xA ) {
return KC_1 + ( hex - 0x1 ) ;
} else {
return KC_A + ( hex - 0xA ) ;
}
}
2016-11-27 02:37:46 +06:00
void api_send_unicode ( uint32_t unicode ) {
# ifdef API_ENABLE
2016-11-24 07:16:38 +06:00
uint8_t chunk [ 4 ] ;
dword_to_bytes ( unicode , chunk ) ;
MT_SEND_DATA ( DT_UNICODE , chunk , 5 ) ;
2016-11-27 02:37:46 +06:00
# endif
2016-11-24 07:16:38 +06:00
}
2016-06-24 08:18:20 +06:00
__attribute__ ( ( weak ) )
void led_set_user ( uint8_t usb_led ) {
}
__attribute__ ( ( weak ) )
void led_set_kb ( uint8_t usb_led ) {
led_set_user ( usb_led ) ;
}
__attribute__ ( ( weak ) )
void led_init_ports ( void )
{
}
__attribute__ ( ( weak ) )
void led_set ( uint8_t usb_led )
{
// Example LED Code
//
// // Using PE6 Caps Lock LED
// if (usb_led & (1<<USB_LED_CAPS_LOCK))
// {
// // Output high.
// DDRE |= (1<<6);
// PORTE |= (1<<6);
// }
// else
// {
// // Output low.
// DDRE &= ~(1<<6);
// PORTE &= ~(1<<6);
// }
2019-01-29 06:57:56 +06:00
# if defined(BACKLIGHT_CAPS_LOCK) && defined(BACKLIGHT_ENABLE)
// Use backlight as Caps Lock indicator
uint8_t bl_toggle_lvl = 0 ;
if ( IS_LED_ON ( usb_led , USB_LED_CAPS_LOCK ) & & ! backlight_config . enable ) {
// Turning Caps Lock ON and backlight is disabled in config
// Toggling backlight to the brightest level
bl_toggle_lvl = BACKLIGHT_LEVELS ;
} else if ( IS_LED_OFF ( usb_led , USB_LED_CAPS_LOCK ) & & backlight_config . enable ) {
// Turning Caps Lock OFF and backlight is enabled in config
// Toggling backlight and restoring config level
bl_toggle_lvl = backlight_config . level ;
}
// Set level without modify backlight_config to keep ability to restore state
backlight_set ( bl_toggle_lvl ) ;
# endif
2016-06-24 08:18:20 +06:00
led_set_kb ( usb_led ) ;
}
2016-05-24 21:56:53 +06:00
//------------------------------------------------------------------------------
2016-06-04 01:48:40 +06:00
// Override these functions in your keymap file to play different tunes on
2016-05-24 21:56:53 +06:00
// different events such as startup and bootloader jump
__attribute__ ( ( weak ) )
void startup_user ( ) { }
__attribute__ ( ( weak ) )
void shutdown_user ( ) { }
2016-05-25 09:27:59 +06:00
//------------------------------------------------------------------------------
